ANNEX II, Regulation (EU) 2018/505

In forcesince 7 Mar 2018

Annex II to Regulation (EU) 2016/323 is amended as follows:

(1)

code list 2 is replaced by the following:

Field | Content | Field type | Examples

1 | Identifier of the MS where the report is validated | Alphabetic 2 | ES

2 | Nationally assigned, unique code | Alphanumeric 13 | 2005YTE17UIC2

3 | Check Digit | Numeric 1 | 9

Field 1 is taken from the list of <MEMBER STATES> (see Code list 3 in Annex II to Regulation (EC) No 684/2009)

Field 2 must be filled with a unique identifier per report. The way this field is used is under MSAs' responsibility, but each report must have a unique number. It is possible, but not mandatory, that it contains the year when the report was initially submitted (as suggested in the example).

Field 3 gives the Check Digit for the whole identifier, which will help detect an error when keying this identifier.’;

(2)

code list 4 is replaced by the following:

Code | Description

0 | Other

1 | The enquiry or information requested could not be authorised under the laws or administrative practices of the requested Member State for its own use (e.g. Confidential information)

2 | (reserved)

3 | Disclosure contrary to the public policy of the state — The provision of information would lead to the disclosure of a commercial, industrial or professional secret or of a commercial process, or where its disclosure would be contrary to public policy

4 | A judicial authority of the requested Member State has refused to allow the transfer of information under its control

5 | The request concerns information that is no longer available due to national rules of data retention (5 years or more minimum)

6 | The requesting authority has not exhausted the usual sources of information which it could have used in the circumstances

7 | The number and the nature of the requests for information made by the requesting authority within a specific period impose a disproportionate administrative burden on that requested authority

8 | The requesting Member State is unable, for legal reasons, to provide similar information

9 | The consignor has not exhausted all the means available to him to obtain proof that the movement of excise goods between Member States has ended

10 | No check performed

11 | Out of scope of 389/2012 (e.g. Naples II)’

(3)

code list 6 is replaced by the following:

Code | Description

0 | Other

1 | Accident

2 | Goods destroyed

3 | Goods stolen

6 | Vehicle and goods stolen

7 | Transhipment of goods’

(4)

code list 8 is replaced by the following:

Code | Description

0 | Other

1 | Report of Receipt/Export not returned to consignor

2 | Excesses or shortages stated at arrival of good

4 | Submission of an e-AD was rejected because the consignee record of SEED did not match — the request is to ask for more information

6 | Have goods/quantities specified on e-AD been entered in consignee's stock records?

7 | Check that goods have actually left EU (date on which export certified by customs)

8 | Placing of goods under a suspensive customs procedure (export warehouse, victualling warehouse, outward processing, etc.)

9 | Reimbursement of excise duty requested

10 | Spot checks

11 | Copy 3 not returned to Consignor

12 | Reverse of Copy 3 endorsed to show excesses or losses

13 | Certification of Receipt Incomplete

14 | Consignee's Excise Number not in SEED

15 | Particular Deleted/Overwritten without official Endorsement

16 | Request for Manual closure

17 | Export Status Unknown

18 | Request for Interruption of a movement

19 | Perform interview of authorised representative

20 | Fallback document

21 | Two e-ADs were created for the same consignment

22 | Clarification regarding type or quantity of goods

23 | Receipt of goods were rejected/refused

24 | Ongoing excise investigation

25 | Suspicions of irregularity’

(5)

code list 9 is replaced by the following:

Code | Description

0 | Other

2 | Administrative control

3 | Physical control

4 | Confirm entry in trader's records

5 | Confirm quantity received

6 | Confirm authorisation of trader

7 | Confirm the particulars in Box No(s)

11 | Confirm identity of the carrier and the number of the vehicle

12 | Confirm payment of duty

14 | Confirm quantity dispatched

15 | Confirm type of goods dispatched

16 | Confirm Authenticity of Excise official stamp

17 | Confirm Authenticity of Company's Stamp and Trader's signature

18 | Confirm Trader's Authorisation and SEED Data

19 | Manual closure

20 | Hearing of authorised representative (e.g. interview of company manager)

21 | Provide reason for shortage

22 | Confirm shortage/excess/differences

23 | Provide proof that the movement of excise goods has ended

24 | Confirm purpose of goods or next purchaser of goods

25 | Please see attached request

26 | Follow-up measure needs to be taken from the Consignor

27 | Correction required in Export declaration

28 | Confirm the content of the Export Declaration

29 | Inform if the movement has already been released by Customs

30 | Provide Export MRN’

(6)

code list 11 is replaced by the following:

Code | Description

0 | Other

1 | Missing information

2 | Confidential information

3 | Missing time

4 | Deep investigation on economic operator ongoing, short-term answer not possible

5 | Trader could not be contacted

6 | Missing trader’

(7)

a new code list 15 is added:

Code | Description

0 | Other

1 | e-AD

2 | SAAD

3 | Invoice

4 | Delivery note

5 | CMR

6 | Bill of lading

7 | Way Bill

8 | Contract

9 | Trader's Application

10 | Official record

11 | Request

12 | Answer

13 | Fallback documents, Fallback Printout

14 | Photo

15 | Export Declaration

16 | Anticipated Export Record

17 | Exit Results

18 | SAD (Single Administrative Document)’