In Annex I to Regulation (EU) 2016/323, Tables 1 to 14 are replaced by the following:
A | B | C | D | E | F | G
1 | ATTRIBUTES | R | | |
a | Request Correlation Identifier | R | | The value of <Request Correlation Identifier> is unique per Member State. | an..44
2 | EXCISE MOVEMENT e-AD | R | | |
a | ARC | R | | (see Code list 2 in Annex II to Regulation (EC) No 684/2009) | an21
b | Sequence Number | R | | The value of the Data Item must be greater than zero. | n..2
c | National Movement Information Requested flag | R | | The format of Boolean is digital: ‘0’ or ‘1’ (‘0’ = No or False; ‘1’ = Yes or True) | n1
d | Status | R | |
The possible values are:
X01Accepted
X02Cancelled
X03Delivered
X04Diverted
X05Rejected
X06Replaced
X07e-AD Manually closed
X08Refused
X09None
X10Partially Refused
X11Exporting
X12Accepted for Export
X13Stopped
an3
e | Last Received Message Type | R | |
The possible values are:
IE801E-AD
IE803NOTIFICATION OF DIVERTED E-AD
IE807INTERRUPTION OF MOVEMENT
IE810CANCELLATION OF AN E-AD
IE813CHANGE OF DESTINATION
IE818ACCEPTED OR (PARTIALLY) REFUSED REPORT OF RECEIPT/EXPORT
IE819ALERT OR REJECTION OF AN E-AD
IE829NOTIFICATION OF ACCEPTED EXPORT
IE839REJECTION OF E-AD FOR EXPORT
IE905STATUS RESPONSE
NoneNONE
Note: The IE905 should be included only when the e-AD is manually closed.
an..5
f | Status Request Message Type | O | |
The possible values are:
1Status Synchronisation Request
2Movement History Request
n1
A | B | C | D | E | F | G
1 | ATTRIBUTES | R | | |
a | Request Correlation Identifier | R | | The value of <Request Correlation Identifier> is unique per Member State. | an..44
2 | EXCISE MOVEMENT e-AD | R | | |
a | ARC | R | | (see Code list 2 in Annex II to Regulation (EC) No 684/2009) | an21
b | Sequence Number | R | | The value of the Data Item must be greater than zero. | n..2
c | Status | R | |
The possible values of <Status> are:
X01Accepted
X02Cancelled
X03Delivered
X04Diverted
X05Rejected
X06Replaced
X07e-AD Manually closed
X08Refused
X09None
X10Partially Refused
X11Exporting
X12Accepted for Export
X13Stopped
an3
d | Last Received Message Type | R | |
The possible values are:
IE801E-AD
IE803NOTIFICATION OF DIVERTED E-AD
IE807INTERRUPTION OF MOVEMENT
IE810CANCELLATION OF AN E-AD
IE813CHANGE OF DESTINATION
IE818ACCEPTED OR (PARTIALLY) REFUSED REPORT OF RECEIPT/EXPORT
IE819ALERT OR REJECTION OF AN E-AD
IE829NOTIFICATION OF ACCEPTED EXPORT
IE839REJECTION OF E-AD FOR EXPORT
IE905STATUS RESPONSE
NoneNONE
Note: The IE905 should be included only when the e-AD is manually closed.
an..5
A | B | C | D | E | F | G
1 | ATTRIBUTES | R | | |
a | Request Correlation Identifier | R | | The value of <Request Correlation Identifier> is unique per Member State. | an..44
2 | All validated e-ADs | R | | The set of all draft electronic administrative documents and electronic administrative documents relating to the movement, the structure of which is set out in Table 1 of Annex I to Regulation (EC) No 684/2009 | 99x
3 | All Reports of Receipt/Export | O | | The set of all Report of receipt/Report of export messages relating to the movement, the structure of which is set out in Table 6 of Annex I to Regulation (EC) No 684/2009 | 99x
4 | Last Notification of Diverted e-AD | O | | The content of the last Notification of change of destination/Notification of splitting message relating to the movement, the structure of which is set out in Table 4 of Annex I to Regulation (EC) No 684/2009 | 1x
5 | All Control Reports | O | | The set of all Control Report messages relating to the movement, the structure of which is set out in Table 11 | 99x
6 | All Event Reports | O | | The set of all Event Report messages relating to the movement, the structure of which is set out in Table 12 | 99x
7 | All explanations of delay for delivery | O | | The set of all Explanation on delay for delivery messages relating to the movement | 99x
7.1 | ATTRIBUTES | R | | |
a | Message Role | R | |
The possible values are:
1Explanation on delay for sending the report of receipt/export
2Explanation on delay for giving destination
n1
b | Date and Time of Validation of Explanation on Delay | C |
‘R’ after successful validation
Does not apply otherwise
dateTime
c | Submitter Type | R | |
The possible values are:
1Consignor
2Consignee
n1
d | Submitter Identification R an13 Rule072 | R | |
The <Submitter Identification> is a valid trader excise number.
(see Code list 1 in Annex II to Regulation (EU) No 612/2013)
an13
e | Explanation Code | R | | (see Code list 7 in Annex II) | n..2
f | Complementary Information | C |
‘R’ if <Explanation Code> is ‘Other’
‘O’ Otherwise
(see Explanation Code in box 7.1e)
an..350
g | Complementary Information_LNG | C |
‘R’ if the corresponding text field(s) is(are) used
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group | a2
7.2 | EXCISE MOVEMENT e-AD | R | | |
a | ARC | R | | (see Code list 2 in Annex II to Regulation (EC) No 684/2009) | an21
b | Sequence Number | R | | The value of the Data Item must be greater than zero. | n..2
8 | All Notifications of Export | O | | The set of all Notification of accepted export messages relating to the movement | 99x
8.1 | ATTRIBUTES | R | | |
a | Date and Time of Issuance | R | | | dateTime
8.2 | EXCISE MOVEMENT e-AD | R | | | 99x
a | ARC | R | | (see Code list 2 in Annex II to Regulation (EC) No 684/2009) | an21
b | Sequence Number | R | | The value of the Data Item must be greater than zero. | n..2
8.3 | TRADER Consignee | C |
Does not apply if <Message Type> of all concerned e-ADs is ‘Submission for export (local clearance)’
‘R’ otherwise
a | Trader Identification | C |
‘R’ if <Destination Type Code> is:
“Destination - Tax warehouse”
“Destination - Registered consignee”
“Destination - Temporary registered consignee”
“Destination - Direct delivery”
‘O’ if <Destination Type Code> is ‘Destination – Export’
Does not apply otherwise
The possible values of <Trader Identification> are described in the following table:
[The operator type of the consignee is “Authorised warehouse keeper”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;] [The operator type of the consignee is “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;] [The operator type of the consignee is either “Authorised warehouse keeper” or “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;] [An existing <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>;] [An existing identifier <Tax Warehouse Reference> in the set of <TAX WAREHOUSE>;] [For the place of delivery, “Any identification” means: a VAT number or any other identifier; it is optional.]
Destination Type Code | TRADER CONSIGNEE. Trader Identification | TRADER Place of Delivery.Trader Identification
1 - Destination - Tax warehouse
Excise number | Tax Warehouse Reference (Excise Number)
2 - Destination - Registered consignee
Excise number | Any identification
3 - Destination - Temporary registered consignee
Temporary authorisation reference | Any identification
4 - Destination - Direct delivery
Excise number | (Does not apply)
5 - Destination - Exempted consignee
(Does not apply) | Any identification
6 - Destination – Export
VAT number (optional) | (The data group <TRADER Place of Delivery> does not exist)
(see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)
an..16
b | EORI Number | C |
‘O’ if <Destination Type Code> is ‘Destination – Export’
Does not apply otherwise
Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC. | an..17
c | Trader Name | R | | | an..182
d | Street Name | R | | | an..65
e | Street Number | O | | | an..11
f | Postcode | R | | | an..10
g | City | R | | | an..50
h | NAD_LNG | R | | Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group | a2
8.4 | OFFICE Place of Export | O | | |
a | Office Reference Number | R | | (see Code list 5 in Annex II to Regulation (EC) No 684/2009) | an8
8.5 | EXPORT ACCEPTANCE | R | | |
a | Sender Customs Office Reference Number | R | | (see Code list 5 in Annex II to Regulation (EC) No 684/2009) | an8
b | Sender Customs Officer Identification | O | | | an..35
c | Date of Acceptance | R | | | date
d | MRN Export | R | |
A valid MRN or SAD Number confirmed against Customs data, according to the Customs case.
MRNMovement Reference Number
SADSingle Administrative Document
an..21
9 | All Notifications of refusal by Customs | O | | The set of all Customs rejection of e-AD messages relating to the movement | 99x
9.1 | ATTRIBUTES | R | | |
a | Date and Time of Issuance | R | | | dateTime
9.2 | The concerned draft e-AD | C |
In the case of rejection at import one concerned draft e-AD must be given or in the case of rejection at export one or several concerned validated e-ADs must be given.
(see All concerned validated e-ADs in box 9.3)
a | Local Reference Number | R | | | an..22
9.3 | All concerned validated e-ADs | C |
In the case of rejection at import one concerned draft e-AD must be given or in the case of rejection at export one or several concerned validated e-ADs must be given.
(see The concerned draft e-AD in box 9.2)
99x
a | ARC | R | | (see Code list 2 in Annex II to Regulation (EC) No 684/2009) | an21
b | Sequence Number | R | | | n..2
9.4 | REJECTION | R | | |
a | Rejection Date and Time | R | | | dateTime
b | Rejection Reason Code | R | |
The possible values are:
1Import data not found
2The contents of the e-AD does not match with import data
3Export data not found
4The content of the e-AD does not match with export data
5Goods are rejected at export procedure
n1
9.5 | EXPORT CROSS CHECKING DIAGNOSES | C |
‘R’ if <Rejection Reason Code> is “The content of the e-AD does not match with export data”
Does not apply otherwise
(see Rejection Reason Code in box 9.4b)
a | LRN Export | C |
At least one of the following attributes must be present:
<MRN Export>
<LRN Export>
(see MRN Export in box 9.5b)
an..22
b | MRN Export | C |
At least one of the following attributes must be present:
<MRN Export>
<LRN Export>
(see LRN Export in box 9.5a)
A valid MRN or SAD Number confirmed against Customs data, according to the Customs case.
MRNMovement Reference Number
SADSingle Administrative Document
an..21
9.6 | DIAGNOSIS | R | | | 999x
a | ARC | R | | (see Code list 2 in Annex II to Regulation (EC) No 684/2009) | an21
b | Body Record Unique Reference | R | | The value of the Data Item must be greater than zero. | n..3
c | Diagnosis Code | R | |
The possible values are:
1Unknown ARC
2Body Record Unique Reference does not exist in the e-AD
3No corresponding GOODS ITEM in the export declaration
4Weight/mass do not match
5The destination type code of the e-AD is not export
6CN codes do not match
n1
9.7 | TRADER Consignee | C |
‘R’ if <Message Type> of all concerned e-ADs is not “Submission for export (local clearance)”
Does not apply otherwise
The possible Message Types are:
1Standard submission (to be used in all cases except where submission concerns export with local clearance)
2Submission for export with local clearance (Application of Article 283 of Commission Regulation (EEC) No 2454/93 (1))
The message type must not occur in the e-AD to which an ARC has been assigned, nor in the paper document referred to in Article 8(1) of Regulation (EC) No 684/2009
a | Trader Identification | C |
‘R’ if <Destination Type Code> is in:
“Destination - Tax warehouse”
“Destination - Registered consignee”
“Destination - Temporary registered consignee”
“Destination - Direct delivery”
‘O’ if <Destination Type Code> is ‘Destination – Export’
Does not apply otherwise
The possible values of <Trader Identification> are described in the following table:
[The operator type of the consignee is “Authorised warehouse keeper”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;] [The operator type of the consignee is “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;] [The operator type of the consignee is either “Authorised warehouse keeper” or “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;] [An existing <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>;] [An existing identifier <Tax Warehouse Reference> in the set of <TAX WAREHOUSE>;] [For the place of delivery, “Any identification” means: a VAT number or any other identifier; it is optional.]
Destination Type Code | TRADER CONSIGNEE. Trader Identification | TRADER Place of Delivery.Trader Identification
1 - Destination - Tax warehouse
Excise number | Tax Warehouse Reference (Excise Number)
2 - Destination - Registered consignee
Excise number | Any identification
3 - Destination - Temporary registered consignee
Temporary authorisation reference | Any identification
4 - Destination - Direct delivery
Excise number | (Does not apply)
5 - Destination - Exempted consignee
(Does not apply) | Any identification
6 - Destination – Export
VAT number (optional) | (The data group <TRADER Place of Delivery> does not exist)
(see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)
an..16
b | EORI Number | C |
‘O’ if <Destination Type Code> is ‘Destination – Export’
Does not apply otherwise
Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC. | an..17
c | Trader Name | R | | | an..182
d | Street Name | R | | | an..65
e | Street Number | O | | | an..11
f | Postcode | R | | | an..10
g | City | R | | | an..50
h | NAD_LNG | R | | Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group | a2
9.8 | OFFICE Place of Export | O | | |
a | Office Reference Number | R | | (see Code list 5 in Annex II to Regulation (EC) No 684/2009) | an8
10 | The Possible Interruption of Movement | O | | The content of a possible Interruption of movement message relating to the movement, the structure of which is set out in Table 13 | 1x
11 | The Possible Cancellation of e-AD | O | | The content of a possible Cancellation message relating to the movement, the structure of which is set out in Table 2 of Annex I to Regulation (EC) No 684/2009 | 1x
12 | All Changes of Destination | O | | The set of all Change of destination messages relating to the movement, the structure of which is set out in Table 3 of Annex I to Regulation (EC) No 684/2009 | 99x
13 | All Alerts or Rejections of an e-AD | O | | The set of all Alert or Rejection of an e-AD messages relating to the movement, the structure of which is set out in Table 14 | 99x
13.1 | ATTRIBUTES | R | | |
a | Date and Time of Validation of Alert or Rejection | C |
‘R’ after successful validation
Does not apply otherwise
dateTime
13.2 | EXCISE MOVEMENT e-AD | R | | |
a | ARC | R | | (see Code list 2 in Annex II to Regulation (EC) No 684/2009) | an21
b | Sequence Number | R | | The value of the Data Item must be greater than zero. | n..2
13.3 | TRADER Consignee | R | | |
a | Trader Identification | C |
‘R’ if <Destination Type Code> is in:
“Destination - Tax warehouse”
“Destination - Registered consignee”
“Destination - Temporary registered consignee”
“Destination - Direct delivery”
‘O’ if <Destination Type Code> is ‘Destination – Export’
Does not apply otherwise
The possible values of <Trader Identification> are described in the following table:
[The operator type of the consignee is “Authorised warehouse keeper”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;] [The operator type of the consignee is “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;] [The operator type of the consignee is either “Authorised warehouse keeper” or “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;] [An existing <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>;] [An existing identifier <Tax Warehouse Reference> in the set of <TAX WAREHOUSE>;] [For the place of delivery, “Any identification” means: a VAT number or any other identifier; it is optional.]
Destination Type Code | TRADER CONSIGNEE. Trader Identification | TRADER Place of Delivery.Trader Identification
1 - Destination - Tax warehouse
Excise number | Tax Warehouse Reference (Excise Number)
2 - Destination - Registered consignee
Excise number | Any identification
3 - Destination - Temporary registered consignee
Temporary authorisation reference | Any identification
4 - Destination - Direct delivery
Excise number | (Does not apply)
5 - Destination - Exempted consignee
(Does not apply) | Any identification
6 - Destination – Export
VAT number (optional) | (The data group <TRADER Place of Delivery> does not exist)
(see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)
an..16
b | EORI Number | C |
‘O’ if <Destination Type Code> is ‘Destination – Export’
Does not apply otherwise
Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC. | an..17
c | Trader Name | R | | | an..182
d | Street Name | R | | | an..65
e | Street Number | O | | | an..11
f | Postcode | R | | | an..10
g | City | R | | | an..50
h | NAD_LNG | R | | Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group | a2
13.4 | OFFICE of Destination | R | | |
a | Office Reference Number | R | | (see Code list 5 in Annex II to Regulation (EC) No 684/2009) | an8
13.5 | ALERT | R | | |
a | Date of Alert | R | | | date
b | E-AD Rejected flag | R | | The format of Boolean is digital: ‘0’ or ‘1’ (‘0’ = No or False; ‘1’ = Yes or True) | n1
13.6 | ALERT OR REJECTION OF E-AD REASON Code | C |
‘R’ if <E-AD Rejected flag> is True
‘O’ if <E-AD Rejected flag> is False
(see E-AD Rejected Flag in box 13.5b)
9x
a | Alert or Rejection of E-AD Reason Code | R | | (see Code list 5 in Annex II) | n..2
b | Complementary Information | C |
‘R’ if <Alert or Rejection of E-AD Reason Code> is ‘Other’
‘O’ otherwise
(see Alert or Rejection of E-AD Reason Code in box 13.6a)
an..350
c | Complementary Information_LNG | C |
‘R’ if the corresponding text field is used
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group | a2
14 | All Explanations on reason for shortage | O | | | 99x
14.1 | ATTRIBUTES | R | | |
a | Submitter Type | R | |
The possible values are:
1Consignor
2Consignee
n1
b | Date and Time of Validation of Explanation on Shortage | C |
‘R’ after successful validation
Does not apply otherwise
dateTime
14.2 | EXCISE MOVEMENT e-AD | R | | |
a | ARC | R | | (see Code list 2 in Annex II to Regulation (EC) No 684/2009) | an21
b | Sequence Number | R | | The value of the Data Item must be greater than zero. | n..2
14.3 | TRADER Consignor | C |
‘R’ if <Submitter Type> is “Consignor”
Does not apply otherwise
(see Submitter Type in box 14.1a)
a | Trader Excise Number | R | |
For TRADER Consignor
An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>
The <Operator Type Code> of the referred <TRADER> must be:
“Authorised warehouse keeper”; OR
“Registered consignor”
For TRADER Place of dispatch
An existing identifier <Tax Warehouse Reference> (Excise Number in SEED).
(see Code list 1 in Annex II to Regulation (EU) No 612/2013)
an13
b | Trader Name | R | | | an..182
c | Street Name | R | | | an..65
d | Street Number | O | | | an..11
e | Postcode | R | | | an..10
f | City | R | | | an..50
g | NAD_LNG | R | | Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group | a2
14.4 | TRADER Consignee | C |
‘R’ if <Submitter Type> is not “Consignor”
Does not apply otherwise
(see Submitter Type in box 14.1a)
a | Trader Identification | C |
‘R’ if <Destination Type Code> is in:
“Destination - Tax warehouse”
“Destination - Registered consignee”
“Destination — Temporary registered consignee”
“Destination — Direct delivery”
‘O’ if <Destination Type Code> is ‘Destination – Export’
Does not apply otherwise
The possible values of <Trader Identification> are described in the following table:
[The operator type of the consignee is “Authorised warehouse keeper”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;] [The operator type of the consignee is “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;] [The operator type of the consignee is either “Authorised warehouse keeper” or “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;] [An existing <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>;] [An existing identifier <Tax Warehouse Reference> in the set of <TAX WAREHOUSE>;] [For the place of delivery, “Any identification” means: a VAT number or any other identifier; it is optional.]
Destination Type Code | TRADER CONSIGNEE. Trader Identification | TRADER Place of Delivery.Trader Identification
1 - Destination - Tax warehouse
Excise number | Tax Warehouse Reference (Excise Number)
2 - Destination - Registered consignee
Excise number | Any identification
3 - Destination - Temporary registered consignee
Temporary authorisation reference | Any identification
4 - Destination - Direct delivery
Excise number | (Does not apply)
5 - Destination - Exempted consignee
(Does not apply) | Any identification
6 - Destination – Export
VAT number (optional) | (The data group <TRADER Place of Delivery> does not exist)
8 - Unknown destination
(Does not apply) | (Does not apply)
(see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)
an..16
b | EORI Number | |
‘O’ if <Destination Type Code> is ‘Destination – Export’
Does not apply otherwise
Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC | an..17
c | Trader Name | R | | | an..182