ANNEX VI SPECIFIC REQUIREMENTS FOR THE PROVIDERS OF AERONAUTICAL INFORMATION SERVICES, Regulation (EU) 2017/373

In forcesince 1 May 2025cited 4×

(Part-AIS)

An aeronautical information services (AIS) provider shall establish information management resources and processes that are adequate to ensure the timely collection, processing, storing, integration, exchange and delivery of quality-assured aeronautical data and aeronautical information within the ATM system.

An AIS provider shall ensure the provision of aeronautical data and aeronautical information necessary for the safety, regularity and efficiency of air navigation.

An AIS provider shall receive, collate or assemble, edit, format, publish, store and distribute aeronautical data and aeronautical information concerning the entire territory of a Member State as well as those areas over the high seas in which the Member State is responsible for the provision of air traffic services.

An AIS provider shall ensure that aeronautical data and aeronautical information are available for:

(1)

personnel involved in flight operations, including flight crews, flight planning, and flight simulators;

(2)

ATS providers responsible for flight information service, and

(3)

the services responsible for pre-flight information.

An AIS provider shall provide 24-hour services for NOTAM origination and issuance in its area of responsibility and for pre-flight information needed in relation to route stages originating at the aerodrome/heliport in its area of responsibility.

An AIS provider shall make available to other AIS providers aeronautical data and aeronautical information required by them.

An AIS provider shall ensure that procedures are in place to assess and mitigate safety risks to aviation arising from data and information errors.

An AIS provider shall clearly indicate that aeronautical data and aeronautical information provided for and on behalf of a Member State are provided under the authority of that Member State, irrespective of the format in which it is provided.

An AIS provider shall ensure that:

(a)

aeronautical data and aeronautical information are provided in accordance with the specifications laid down in the aeronautical data catalogue, specified in Appendix 1 to Annex III (Part-ATM/ANS.OR);

(b)

data quality is maintained; and

(c)

automation is applied to enable the processing and exchange of digital aeronautical data.

An AIS provider shall ensure that formal arrangements are established with:

(a)

all parties transmitting data to them; and

(b)

other AIS providers, when exchanging aeronautical data and aeronautical information with them.

An AIS provider shall ensure that:

(a)

the format of aeronautical data is based on an aeronautical information exchange model designed to be globally interoperable; and

(b)

aeronautical data is exchanged through electronic means.

An AIS provider shall ensure that tools and software used to support or automate aeronautical data and aeronautical information processes perform their functions without adversely impacting on the quality of aeronautical data and aeronautical information.

An AIS provider shall ensure that verification and validation techniques are employed so that the aeronautical data meets the associated data quality requirements (DQRs) specified in point AIS.TR.200.

An AIS provider shall collect and preserve metadata.

An AIS provider shall ensure that:

(a)

digital data error detection techniques are used during the transmission and/or storage of aeronautical data in order to support the applicable data integrity levels specified in point AIS.TR.200(c); and

(b)

the transfer of aeronautical data is subject to a suitable authentication process such that recipients are able to confirm that the data or information has been transmitted by an authorised source.

An AIS provider shall ensure that error reporting, error measurement and corrective action mechanisms are established and maintained.

An AIS provider shall identify, in the aeronautical information products, except for NOTAM, the aeronautical data and aeronautical information that do not meet the DQRs.

Where aeronautical data or aeronautical information is duplicated in the AIP of more than one Member State, the AIS providers responsible for those AIPs shall establish mechanisms to ensure consistency between the duplicated information.

When providing aeronautical data and aeronautical information in multiple formats, an AIS provider shall ensure that processes are implemented for data and information consistency between those formats.

An AIS provider shall issue an AIP.

An AIS provider shall:

(a)

issue permanent changes to the AIP as AIP amendments; and

(b)

ensure that the AIP is amended or reissued at such regular intervals as necessary to ensure that the information is complete and up to date.

An AIS provider shall:

(a)

issue, as AIP supplements, temporary changes of long duration – three months or longer – and information of short duration which contains extensive text and/or graphics;

(b)

regularly provide a checklist of the valid AIP supplements; and

(c)

publish a new AIP supplement as a replacement when an error occurs in an AIP supplement or when the period of validity of an AIP supplement is changed.

An AIS provider shall issue as an AIC any of the following:

(a)

a long-term forecast of any major change in legislation, regulations, procedures or facilities;

(b)

information of a purely explanatory or advisory nature which affects flight safety;

(c)

information or notification of an explanatory or advisory nature, concerning technical, legislative or purely administrative matters.

An AIS provider shall review at least once a year the validity of an AIC in force.

An AIS provider shall ensure that the following aeronautical charts, where made available:

(a)

form part of the AIP or are provided separately to recipients of the AIP:

(1)

aerodrome obstacle chart – Type A;

(2)

aerodrome/heliport chart;

(3)

aerodrome ground movement chart;

(4)

aircraft parking/docking chart;

(5)

precision approach terrain chart;

(6)

ATC surveillance minimum altitude chart;

(7)

area chart;

(8)

standard arrival chart – instrument (STAR);

(9)

standard departure chart – instrument (SID);

(10)

instrument approach chart;

(11)

visual approach chart; and

(12)

en-route chart; and

(b)

are provided as part of the aeronautical information products:

(1)

aerodrome obstacle chart – Type B;

(2)

world aeronautical chart 1:1 000 000;

(3)

world aeronautical chart 1:500 000;

(4)

aeronautical-navigation chart – small scale; and

(5)

plotting chart.

An AIS provider shall:

(a)

promptly issue a NOTAM whenever the information to be distributed is of a temporary nature and of short duration or when operationally significant permanent changes, or temporary changes of long duration, are made at short notice, except for extensive text and/or graphics; and

(b)

issue, as a NOTAM, information on the establishment, condition, or change of any aeronautical facility, service, procedure or hazard, the timely knowledge of which is essential to personnel involved with flight operations;

Compliance with point AIS.OR.200 shall not inhibit the urgent distribution of aeronautical information necessary to ensure the safety of flight.

If available, an AIS provider shall ensure that digital data is in the form of the following data sets:

(1)

AIP data set;

(2)

terrain data set;

(3)

obstacle data sets;

(4)

aerodrome mapping data sets; and

(5)

instrument flight procedure data sets.

When made available, terrain data shall be provided in the form of terrain data sets.

A checklist of valid data sets shall be regularly provided.

Each data set shall include a minimum set of metadata to be provided to the next user.

An AIS provider shall ensure that the AIP data set, if available, contains the digital representation of aeronautical information of lasting character, including permanent information and long-duration temporary changes.

An AIS provider shall ensure that terrain and obstacle data, if available, are provided in accordance with point AIS.TR.350.

An AIS provider shall ensure that terrain data, if available, is provided:

(a)

for Area 1, as laid down in point AIS.TR.350; and

(b)

for aerodromes to cover:

(1)

Area 2a or parts thereof, as laid down in point AIS.TR.350(b)(1);

(2)

Areas 2b, 2c and 2d or parts thereof, as laid down in points AIS.TR.350(b)(2), (3) and (4), for terrain:

(i)

within 10 km from the aerodrome reference point (ARP); and

(ii)

beyond 10 km from the ARP if the terrain penetrates the horizontal plane 120 m above the lowest runway elevation;

(3)

the take-off flight path area or parts thereof;

(4)

an area, or parts thereof, bounded by the lateral extent of the aerodrome obstacle limitation surfaces;

(5)

Area 3 or parts thereof, as laid down in point AIS.TR.350(c), for terrain that extends 0.5 m above the horizontal plane, passing through the nearest point on the aerodrome movement area; and

(6)

Area 4 or parts thereof, as laid down in point AIS.TR.350(d), for all runways where precision approach Category II or III operations have been established and where detailed terrain information is required by operators to enable them to assess the effect of terrain on decision height determination by use of radio altimeters.

An AIS provider shall ensure that obstacle data, if available, is provided:

(a)

for obstacles in Area 1 whose height is 100 m or higher above ground;

(b)

for aerodromes, for all obstacles within Area 2 that are assessed as being a hazard to air navigation; and

(c)

for aerodromes, to cover:

(1)

Area 2a or parts thereof, for those obstacles that penetrate the relevant obstacle data collection surface;

(2)

objects in the take-off flight path area or parts thereof, which project above a plane surface having a 1,2 % slope and having a common origin with the take-off flight path area;

(3)

penetrations of the aerodrome obstacle limitation surfaces or parts thereof;

(4)

Areas 2b, 2c and 2d, for obstacles that penetrate the relevant obstacle data collection surfaces;

(5)

Area 3 or parts thereof, for obstacles that penetrate the relevant obstacle data collection surface; and

(6)

Area 4 or parts thereof, for all runways where precision approach Category II or III operations have been established.

An AIS provider shall ensure that aerodrome mapping data sets, if available, are provided in accordance with point AIS.TR.365.

An AIS provider shall ensure that instrument flight procedure data sets, if available, are provided in accordance with point AIS.TR.370.

An AIS provider shall:

(a)

distribute available aeronautical information products to those users who request them;

(b)

make available the AIP, AIP amendments, AIP supplements, NOTAM and AIC by the most expeditious means;

(c)

ensure that NOTAM are distributed through the aeronautical fixed service (AFS), whenever practicable;

(d)

ensure that international exchange of NOTAM takes place only as mutually agreed between the international NOTAM offices and multinational NOTAM processing units concerned; and

(e)

arrange, as necessary, the issuance and receipt of NOTAM distributed by telecommunication to satisfy operational requirements.

An AIS provider shall ensure that:

(a)

for any aerodrome/heliport, aeronautical information relative to the route stages originating at the aerodrome/heliport is made available to flight operations personnel, including flight crew and services responsible for pre-flight information; and

(b)

aeronautical information provided for pre-flight planning purposes includes information of operational significance from the elements of the aeronautical information products.

An AIS provider shall ensure that aeronautical data and aeronautical information are amended or reissued to keep them up to date.

An AIS provider shall ensure that information concerning the circumstances listed in point AIS.TR.505(a) is distributed under the AIRAC system.

An AIS provider shall ensure that:

(1)

the information notified under the AIRAC system is not changed further for at least another 28 days after the AIRAC effective date unless the circumstance notified is of a temporary nature and would not persist for the full period;

(2)

the information provided under the AIRAC system is distributed/made available so as to reach recipients at least 28 days in advance of the AIRAC effective date; and

(3)

implementation dates other than the AIRAC effective dates are not used for pre-planned operationally significant changes requiring cartographic work and/or for updating of navigation databases.

An AIS provider shall:

(a)

ensure that NOTAM are provided in accordance with point AIS.TR.510; and

(b)

provide a ‘trigger NOTAM’, as laid down in point AIS.TR.510(f), when an AIP amendment or an AIP supplement is published in accordance with AIRAC procedures.

An AIS provider shall:

(a)

amend or reissue data sets at such regular intervals as may be necessary to keep them up to date; and

(b)

issue permanent changes and temporary changes of long duration – three months or longer – made available as digital data in the form of a complete data set and/or a subset that includes only the differences from the previously issued complete data set.

In addition to point ATM/ANS.OR.B.005(a)(6) of Annex III, the AIS provider shall ensure that personnel responsible for the provision of aeronautical data and aeronautical information is:

(a)

made aware of and applies the following:

(1)

the requirements on aeronautical information products and services, as specified in Sections 2 to 5;

(2)

the update cycles applicable to the issuing of AIP amendments and AIP supplements for the areas for which they provide aeronautical data or aeronautical information;

(b)

adequately trained, competent and authorised for the job they are required to do.

(a)

The accuracy of aeronautical data shall be as specified in the aeronautical data catalogue (‘data catalogue’), specified in Appendix 1 to Annex III (Part-ATM/ANS.OR).

(b)

The resolution of aeronautical data shall be commensurate with the actual data accuracy.

(c)

The integrity of aeronautical data shall be maintained. Based on the integrity classification specified in the data catalogue, procedures shall be put in place so that:

(1)

for routine data, corruption is avoided throughout the processing of the data;

(2)

for essential data, corruption does not occur at any stage of the entire process and additional processes are included, as needed, to address potential risks in the overall system architecture to further assure data integrity at this level;

(3)

for critical data, corruption does not occur at any stage of the entire process and additional integrity assurance processes are included to fully mitigate the effects of faults identified by thorough analysis of the overall system architecture as potential data integrity risks.

(d)

The traceability of aeronautical data shall be ensured.

(e)

The timeliness of the aeronautical data shall be ensured, including any limits on the effective period of the data.

(f)

The completeness of the aeronautical data shall be ensured.

(g)

The format of delivered data shall be adequate to ensure that the data is interpreted in a manner that is consistent with its intended use.

Except for terrain data, the exchange format of aeronautical data shall:

(a)

enable the exchange of data for both individual features and feature collections;

(b)

enable the exchange of baseline information as a result of permanent changes;

(c)

be structured in accordance with the subjects and properties of the aeronautical data catalogue, and be documented through a mapping between the exchange format and the aeronautical data catalogue.

(a)

The verification shall ensure that:

(1)

the aeronautical data was received without corruption;

(2)

the aeronautical data process does not introduce corruption.

(b)

Aeronautical data and aeronautical information entered manually shall be subject to independent verification to identify any errors that may have been introduced.

The metadata to be collected shall include, as a minimum:

(a)

the identification of the organisations or entities performing any action of originating, transmitting or manipulating the aeronautical data;

(b)

the action performed;

(c)

the date and time the action was performed.

The error reporting, error measurement and corrective mechanisms shall ensure that:

(a)

problems identified during origination, production, storage, handling and processing, or those reported by users after publication, are recorded;

(b)

all problems reported in relation to the aeronautical data and aeronautical information are analysed by the AIS provider and the necessary corrective actions are performed;

(c)

priority is given to resolution of all errors, inconsistencies and anomalies detected in critical and essential aeronautical data;

(d)

affected users are warned of errors by the most effective means, taking into account the integrity level of the aeronautical data and aeronautical information;

(e)

error feedback is facilitated and encouraged.

The identification of data not meeting the DQRs shall be made with an annotation or by explicitly providing the quality value.

(a)

Aeronautical information products intended for distribution shall include English text for those parts expressed in plain language, except those products intended to be distributed solely within a Member State.

(b)

Place names shall be spelt in conformity with local usage and transliterated, when necessary, into the International Organization for Standardization (ISO) basic Latin alphabet.

(c)

International Civil Aviation Organization (ICAO) abbreviations shall be used in the aeronautical information products whenever they are appropriate.

(a)

The AIP, AIP amendments and AIP supplements shall be provided as an ‘electronic AIP’ (eAIP).The eAIP shall allow for displaying on computer screen and printing on paper. In addition, the AIP, AIP amendments and AIP supplements may also be provided on paper.

(b)

The AIP shall include:

(1)

a statement of the competent authority responsible for the air navigation facilities, services or procedures covered by the AIP;

(2)

the general conditions under which the services or facilities are available for use;

(3)

a list of significant differences between the regulations and practices of the Member State and the related ICAO Standards and Recommended Practices (SAPRs) and Procedures;

(4)

the choice made by a Member State in each significant case where an alternative course of action is provided for in the ICAO SARPs and procedures.

(c)

The AIP shall contain information related to, and arranged under, the subject headings listed in Appendix 1.

(d)

The issuing Member State and AIS provider shall be clearly indicated.

(e)

When two or more Member States jointly provide an AIP, they shall be clearly indicated.

(f)

Each AIP shall be self-contained and include a table of contents.

(g)

An AIP shall be organised in three parts (GEN, ENR and AD), sections and subsections, except when the AIP, or a volume of the AIP, is designed to facilitate operational use in- flight, in which case the precise format and arrangement may be left to the discretion of the Member State provided that an adequate table of contents is included.

(h)

Each AIP shall be dated.

(i)

The date, consisting of the day, month (by name), and year, shall be the publication date and/or the effective date (AIRAC) of the information.

(j)

When describing periods of activity, availability or operation, the applicable days and times shall be specified.

(k)

Each AIP issued as a printed volume and each page of an AIP issued in a loose-leaf form shall be annotated to clearly indicate:

(1)

the identity of the AIP;

(2)

the territory covered and its subdivisions, when necessary;

(3)

the identification of the issuing Member State and producing organisation (authority); and

(4)

page numbers/chart titles.

(l)

Any amendment to the printed volume of the AIP shall be made using replacement sheets.

(a)

Any operationally significant changes to the AIP, in accordance with point AIS.OR.505, shall be issued under AIRAC and clearly identified as such.

(b)

Each AIP amendment shall be allocated a serial number, which shall be consecutive.

(c)

When an AIP amendment is issued, it shall include references to the serial number of the NOTAM which have been incorporated into the amendment.

(d)

The most current update cycles applicable to AIP amendments shall be made publicly available.

(e)

Recourse to hand amendments/annotations shall be kept to a minimum; the normal method of amendment shall be by reissuing or by replacement of pages.

(f)

Each AIP amendment shall:

(1)

include a checklist with the current dates and numbers of each loose-leaf page in the AIP; and

(2)

provide a recapitulation of any outstanding hand amendments.

(g)

New or revised information shall be identified by an annotation against it in the margin.

(h)

Each AIP amendment page, including the cover sheet, shall contain a publication date and, when applicable, an effective date.

(i)

The regular intervals between the AIP amendments shall be specified in Part 1 – General (GEN) of the AIP.

(a)

The AIP supplement issued in printed form shall be provided by means of distinctive pages.

(b)

The most current update cycles applicable to AIP supplements shall be made publicly available.

(c)

Each AIP supplement shall be allocated a serial number which shall be consecutive and based on the calendar year.

(d)

Whenever an AIP supplement is issued as a replacement of a NOTAM, a reference to the series and number of the NOTAM shall be included.

(e)

A checklist of valid AIP supplements shall be issued at intervals of not more than one month, as part of the checklist of NOTAM and also with distribution as for the AIP supplements.

(f)

Each AIP supplement page shall have a publication date. Each AIRAC AIP supplement page shall have both a publication and an effective date.

(a)

The AIC shall be provided as an electronic document.

(b)

The AIC shall be provided whenever it is desirable to promulgate:

(1)

forecasts of important changes in the air navigation procedures, services and facilities;

(2)

forecasts of implementation of new navigational systems;

(3)

significant information derived from aircraft accident/incident investigation which has a bearing on flight safety;

(4)

information on regulations related to the safeguarding of civil aviation against acts of unlawful interference that jeopardise the security of civil aviation;

(5)

advice on medical matters of special interest to pilots;

(6)

warnings to pilots concerning the avoidance of physical hazards;

(7)

information on the effect of certain weather phenomena on aircraft operations;

(8)

information on new hazards affecting aircraft handling techniques;

This article is long: the rest is at the official publication.