In respect of flow control, the adjacent transmission system operators shall:
ensure that rules are established in order to facilitate a controllable, accurate, predictable and efficient gas flow across the interconnection point;
ensure that rules are established for steering the gas flow across the interconnection point and for minimising the deviations from the flow pursuant to the matching process;
designate the transmission system operator who is responsible for steering the gas flow across the interconnection point. If the adjacent transmission system operators fail to agree on this designation, the transmission system operator that operates the flow control equipment shall, in cooperation with the other transmission system operator(s), be responsible for steering the gas flow across the interconnection point.
In order to steer the gas flow, the adjacent transmission system operators shall decide on the quantity and direction of the gas flow for each interconnection point and for each hour of the gas day.
The transmission system operator designated pursuant to point (c) of paragraph 1 shall be responsible for steering the gas flow across the interconnection point provided that contractual obligations regarding pressure are complied with by all adjacent transmission system operators:
at a level of accuracy sufficient to minimise the steering difference; and
at a level of stability in line with the efficient use of the gas transmission networks.
The quantity and direction of the gas flow decided by the adjacent transmission system operators shall reflect:
the result of the matching process;
the operational balancing account correction;
any efficient flow control arrangements between the adjacent transmission system operators for purposes such as ramp-up, ramp-down, minimum flow, split of the flow at the virtual interconnection point if any, and/or switch of flow direction or operational cost efficiency;
any arrangement managing cross-border trade restrictions due to gas quality differences pursuant to Article 15 and/or odourisation practices pursuant to Article 19.
A transmission system operator may decide to alter the quantity of gas or the gas flow direction or both, if this is needed, in order to:
comply with provisions laid down in national or Union safety legislation applicable to the interconnection point;
comply with requirements laid down in Emergency Plans and Preventive Action Plans developed in accordance with Regulation (EU) No 994/2010 of the European Parliament and of the Council [Regulation (EU) No 994/2010 of the European Parliament and of the Council of 20 October 2010 concerning measures to safeguard security of gas supply and repealing Council Directive 2004/67/EC (OJ L 295, 12.11.2010, p. 1).];
react in case the operator's system is affected by an exceptional event.