ANNEX VIII, Regulation (EU) 2015/220

In forcesince 1 Jan 2024

The data to be collected is classified by table and broken down into groups, categories and columns. The convention used to refer to a specific data field is:

<table letter>.<group>.<category code>(.<other specific category codes).column

Specific data values are captured at column level. In the tables set out below, clear cells are where data values can be accepted; greyed cells marked with a ‘—’ have no meaning in the group context, so no data is accepted in those.

Examples:

B.UT.20.A (column A of the group UT, category 20, from table B) represents the ‘Area’ of ‘Rented UAA’ to be recorded under the ‘UAA for tenant farming’ in table B.

I.

A.10110.1.0.TA (column TA of the group A, category 10110, from table I) represents the total area of ‘Common wheat and spelt’ for type of crop 1 ‘Field scale crops – main crop, combined crop’ and missing data code 0 ‘No data missing’.

M.S.1150.1.2.V (column V of the group S, category 1150 with other specific category codes 1 and 2 from table M) represents the subsidy value of ‘Basic Income Support for Sustainability – based on payments entitlements’ that is financed solely from the Union budget and is granted per ha.

When a value is not relevant or missing for any particular holding, do not enter value ‘0’.

Tables are represented by one letter, groups by one or more letters, categories by numeric codes and columns by one or more letters.

For tables A to M, the first table shows the high level matrix for groups and columns. The second table shows how this breaks down for categories where each category is represented by one or more codes and sub-codes.

The data in a farm return should be given with the following degrees of accuracy:

financial values: values in EUR or in national monetary units without decimal. However, for national currencies where the unit represents a low relative value compared to the EUR, it may be agreed between the liaison agency of the Member State in question and the staff of the Commission which manages the FADN, to express the values in hundreds or thousands of national currency units,

physical quantities: in quintals (1 q = 100 kg) except in the case of eggs, which will be expressed in thousands and wine and related products which will be expressed in hectolitres,

areas: in ares (1 a = 100 m2), except in the case of mushrooms which will be expressed in square metres of total cropped area and except in Table M ‘Subsidies’, where basic units are to be registered in ha,

average livestock numbers: to two decimal places, except for poultry and rabbits, which are to be given in whole numbers, and bees which are to be given in number of occupied hives,

labour units: to two decimal places.

For each table category and column value, further definitions and instructions are set out after the table concerned.

Category of general information | Code (*)

Columns

Group of information | FADN Division | Subdivision | Serial number of holding | Degree | Minutes | NUTS | Number of the accounting office | Date | Weight of the farm | Type of farming | Economic size class | Code

R | S | H | DG | MI | N | AO | DT | W | TF | ES | C

ID | Identification of the holding | | | | — | — | — | — | — | — | — | — | —

LO | Location of the holding | — | — | — | | | | — | — | — | — | — | —

AI | Accounting information | — | — | — | — | — | — | | | — | — | — |

TY | Typology | — | — | — | — | — | — | — | — | | | | —

CL | Classes | — | — | — | — | — | — | — | — | — | — | — |

OT | Other particulars of the holding | — | — | — | — | — | — | — | — | — | — | — |

Code (*) | Description | Group | R | S | H | DG | MI | N | AO | DT | W | TF | ES | C

10 | Number of the holding | ID | AID10R | AID10S | AID10H | — | — | — | — | — | — | — | — | —

20 | Latitude | LO | — | — | — | ALO20DG | ALO20MI | — | — | — | — | — | — | —

30 | Longitude | LO | — | — | — | ALO30DG | ALO30MI | — | — | — | — | — | — | —

40 | NUTS3 | LO | — | — | — | — | — | ALO40N | — | — | — | — | — | —

50 | Accounting office | AI | — | — | — | — | — | — | AAI50AO | — | — | — | — | —

60 | Type of accounting | AI | — | — | — | — | — | — | — | — | — | — | — | AAI60C

70 | Date of closure of accounts | AI | — | — | — | — | — | — | — | AAI70DT | — | — | — | —

80 | National weight calculated by the Member State | TY | — | — | — | — | — | — | — | — | ATY80W | — | — | —

90 | Classification at the time of selection | TY | — | — | — | — | — | — | — | — | — | ATY90TF | ATY90ES | —

100 | Other gainful activities (OGA) directly related to the holding | CL | — | — | — | — | — | — | — | — | — | — | — | ACL100C

110 | Type of ownership/ economic objective | CL | — | — | — | — | — | — | — | — | — | — | — | ACL110C

120 | Legal status | CL | — | — | — | — | — | — | — | — | — | — | — | ACL120C

130 | Level of liability of the holder(s) | CL | — | — | — | — | — | — | — | — | — | — | — | ACL130C

140 | Organic farming | CL | — | — | — | — | — | — | — | — | — | — | — | ACL140C

141 | Sectors in organic farming | CL | — | — | — | — | — | — | — | — | — | — | — | ACL141C

150 | Protected Designation of Origin (PDO) / Protected Geographical Indication (PGI) / Traditional Speciality Guaranteed (TSG) / mountain product | CL | — | — | — | — | — | — | — | — | — | — | — | ACL150C

151 | Sectors with PDO/PGI /TSG/mountain product | CL | — | — | — | — | — | — | — | — | — | — | — | ACL151C

160 | Areas facing natural and other specific constraints | CL | — | — | — | — | — | — | — | — | — | — | — | ACL160C

170 | Altitude | CL | — | — | — | — | — | — | — | — | — | — | — | ACL170C

180 | Structural Funds area | CL | — | — | — | — | — | — | — | — | — | — | — | ACL180C

190 | Natura 2000 area | CL | — | — | — | — | — | — | — | — | — | — | — | ACL190C

200 | Water directive (2000/60/EC) area | CL | — | — | — | — | — | — | — | — | — | — | — | ACL200C

210 | Irrigation system | OT | — | — | — | — | — | — | — | — | — | — | — | AOT210C

220 | Livestock unit grazing days on common land | OT | — | — | — | — | — | — | — | — | — | — | — | AOT220C

230 | Member of Producer Organisations (POs) | OT | — | — | — | — | — | — | | — | — | — | — | AOT230C

231 | Economic relevance of Producer Organisations (POs) to the farm | OT | — | — | — | — | — | — | | — | — | — | — | AOT231C

232 | Number of members of Producer Organisations (POs) | OT | — | — | — | — | — | — | | — | — | — | — | AOT232C

A number is assigned to each returning holding when it is selected for the first time. The holding retains this number permanently for the duration of its inclusion in the accountancy network. A number once assigned is never allotted to another holding.

However, where the holding undergoes a fundamental change, and in particular where this change is the result of a subdivision into two separate holdings or of a merger with another holding, it may be considered as a new holding. In this case a new number is to be assigned to it. A change in the type of farming practised on the holding does not call for a new number. Where confusion with any other returning holding might result from the holding keeping the number it has (e.g. when new regional subdivisions are created), the number should be changed. A table showing the equivalence of old and new numbers is then to be forwarded to the Commission.

The holding number comprises three groups of indications as follows:

A.ID.10.R. FADN Division: a code number is to be given, corresponding to the code set in Annex II to this Regulation.

A.ID.10.S. Subdivision: a code number is to be given.

The subdivisions chosen should be based on the common system of classification of the regions, referred to as the nomenclature of territorial statistical units (NUTS) established by Eurostat in cooperation with the national institutes for statistics.

In any case, the Member State concerned will transmit to the Commission a table indicating, for each subdivision code used, the corresponding NUTS regions, as well as the corresponding region for which specific values of standard output are calculated.

A.ID.10.H. Serial number of the holding.

The location of the holding is given with two indications: the geo-reference (latitude and longitude) and the code of the NUTS level 3 territorial units.

A.LO.20. Latitude: degrees and minutes (within an arc of 5 minutes), columns DG and MI.

A.LO.30. Longitude: degrees and minutes (within an arc of 5 minutes), columns DG and MI.

A.LO.40.N. The NUTS3 code means the code of the NUTS level 3 territorial unit where the holding is located. The latest version of the code as described in Regulation (EC) No 1059/2003 should be given.

A.AI.50.AO. Number of the accounting office: a code number is to be given.

In each Member State, each accounting office should be given a unique number. The number of the accounting office which has dealt with the holding for this accounting year should be given.

A.AI.60.C. Type of accounting: an indication is to be given on the type of accounting that the farm keeps. The following code numbers are to be used:

1.

Double-entry accounting.

2.

Single-entry accounting.

3.

None.

A.AI.70.DT. Date of closure of accounts: to be recorded in format ‘YYYY-MM-DD’, for example 2009-06-30 or 2009-12-31.

A.TY.80.W. National weight of the farm: the value of the extrapolating factor calculated by the Member State should be given. Values must be expressed with two decimals.

A.TY.90.TF. Type of farming at the time of selection: holding type of farming code in accordance with Annex IV to this Regulation at the time of selection for the accounting year in question.

A.TY.90.ES. Economic size at the time of selection: economic size class code of holding in accordance with Annex V to this Regulation at the time of selection for accounting year in question.

A.CL.100.C. Other gainful activities directly related to the holding: to be provided as a percentage band indicating the share of turnover [See Annex VII to this Regulation.] coming from the other gainful activities directly related to the holding in the total farm turnover. The following code numbers are to be used:

1.

≥ 0 to ≤ 10 % (marginal share)

2.

> 10 % to ≤ 50 % (medium share)

3.

> 50 % to < 100 % (significant share)

A.CL.110.C. Type of ownership/economic objective: an indication of what are the ownership and economic objectives of the holding should be given. The following code numbers should be used:

1.

family farm: the holding uses the labour and capital of the holder(s)/manager(s) and his/her family and they are the beneficiaries of the economic activity;

2.

partnership: the production factors for the holding are provided by several partners, at least some of whom participate in the work of the farm as unpaid labour. The benefits go to the partnership;

3.

company with profit objective: the benefits are used to remunerate shareholders with dividends/profits. The holding is owned by the company;

4.

company with non-profit objective: the benefits are used primarily to maintain employment or similar social objective. The holding is owned by the company.

A.CL.120.C. Legal status: an indication should be given whether the holding is a legal person or not. The following code numbers are to be used:

0.

False.

1.

True.

A.CL.130.C. Level of liability of the holder(s): an indication is to be given on the level of liability (economic responsibility) of the (main) holder. The following code numbers are to be used:

1.

Full.

2.

Partial.

A.CL.140.C. Organic farming: an indication is to be given whether the holding applies organic production methods, within the meaning of Regulation (EC) No 834/2007 [Council Regulation (EC) No 834/2007 of 28 June 2007 on organic production and labelling of organic products and repealing Regulation (EEC) No 2092/91 (OJ L 189, 20.7.2007, p. 1).], in particular Articles 4 and 5 thereof. The following code numbers are to be used:

1.

the holding does not apply organic production methods;

2.

the holding applies only organic production methods for all its products;

3.

the holding applies both organic and other production methods;

4.

the holding is converting to organic production methods.

A.CL.141.C. Sectors in organic farming: when the holding applies both organic and other production methods, an indication of the sectors of production where the holding applies only organic production method should be given (multiple selections are allowed). The code numbers listed below are to be used. When the holding applies both organic and other production methods for all its sectors of production, the code ‘not applicable’ should be used.

0.

not applicable

31.

cereals

32.

oilseeds and protein crops

33.

fruits and vegetables (including citrus fruits, but excluding olives)

34.

olives

35.

vineyards

36.

beef

37.

cow's milk

38.

pigmeat

39.

sheep and goats (milk and meat)

40.

poultry meat

41.

eggs

42.

other sector

A.CL.150.C. ‘Protected Designation of Origin’ / ‘Protected Geographical Indication’ / ‘Traditional Speciality Guaranteed’ / ‘mountain product’: an indication is to be given whether the holding produces agricultural products and/or foodstuffs protected by a Protected Designation of Origin (PDO), a Protected Geographical Indication (PGI), a Traditional Speciality Guaranteed (TSG) or a mountain product indications or whether it produces agricultural products which are known to be used to produce foodstuffs protected by PDO/PGI/TSG/‘mountain product’, within the meaning of Regulation (EU) No 1151/2012 of the European Parliament and of the Council [Regulation (EU) No 1151/2012 of the European Parliament and of the Council of 21 November 2012 on quality schemes for agricultural products and foodstuffs ( OJ L 343, 14.12.2012, p. 1).]. The following code numbers are to be used:

1.

the holding does not produce any product or foodstuff protected by PDO, PGI, TSG or ‘mountain product’ indications, nor any product known to be used to produce foodstuffs protected by PDO, PGI, TSG or ‘mountain product’ indications;

2.

the holding produces only products or foodstuffs protected by PDO, PGI, TSG or ‘mountain product’ indications, or products known to be used to produce foodstuffs protected by PDO, PGI, TSG or ‘mountain product’ indications;

3.

the holding produces some products or foodstuffs protected by PDO, PGI, TSG or ‘mountain product’ indications, or some products known to be used to produce foodstuffs protected by PDO, PGI, TSG or ‘mountain product’ indications.

A.CL.151.C. Sectors with Protected Designation of Origin / Protected Geographical Indication / Traditional Speciality Guaranteed / mountain product: if the majority of the production of some specific sectors is made of products or foodstuffs protected by PDO, PGI, TSG or ‘mountain product’ indications or of products known to be used to produce foodstuffs protected by PDO, PGI, TSG or ‘mountain product’ indications, an indication of the sectors of production should be given (multiple selections are allowed). The code numbers listed below are to be used. When the holding produces some products or foodstuffs protected by PDO, PGI, TSG or ‘mountain product’ indications or some products known to be used to produce foodstuffs protected by PDO, PGI, TSG or ‘mountain product’ indications, but it does not concern the majority of production in that particular sector, the code ‘not applicable’ should be used.

0.

not applicable

31.

cereals

32.

oilseeds and protein crops

33.

fruits and vegetables (including citrus fruits, but excluding olives)

34.

olives

35.

vineyards

36.

beef

37.

cow's milk

38.

pigmeat

39.

sheep and goats (milk and meat)

40.

poultry meat

41.

eggs

42.

other sector.

The items A.CL.150.C. Protected Designation of Origin / Protected Geographical Indication / Traditional Speciality Guaranteed / mountain product and A.CL.151.C are optional for the Member States. If they are applied by the Member State, they should be filled in for all sample farms of the Member State. If A.CL.150.C is applied, A.CL.151.C should be applied as well.

A.CL.160.C. Areas facing natural and other specific constraints: An indication is to be given of whether the majority of the utilised agricultural area of the holding is situated in an area covered by Article 32 of Regulation (EU) No 1305/2013 of the European Parliament and of the Council [Regulation (EU) No 1305/2013 of the European Parliament and of the Council of 17 December 2013 on support for rural development by the European Agricultural Fund for Rural Development (EAFRD) and repealing Council Regulation (EC) No 1698/2005 ( OJ L 347, 20.12.2013, p. 487).]. In those Member States where the delimitation of areas facing significant natural constraints in accordance with Article 32(3) of Regulation (EU) No 1305/2013 is not yet completed, reference is made to the areas which were eligible under Article 36(a)(ii) of Regulation (EC) No 1698/2005 during the 2007-2013 programming period. The following code numbers are to be used:

1.

the majority of the utilised agricultural area of the holding is not situated in an area facing natural and other specific constraints, within the meaning of Article 32 of Regulation (EU) No 1305/2013, nor in an area which was eligible under Article 36(a)(ii) of Regulation (EC) No 1698/2005 during the 2007-2013 programming period in those Member States where the delimitation in accordance with Article 32(3) of Regulation (EU) No 1305/2013 is not yet completed;

21.

the majority of the utilised agricultural area of the holding is situated in an area facing significant natural constraints, within the meaning of Article 32(3) of Regulation (EU) No 1305/2013;

22.

the majority of the utilised agricultural area of the holding is situated in an area affected by specific constraints, within the meaning of Article 32(4) of Regulation (EU) No 1305/2013;

23.

the majority of the utilised agricultural area of the holding is situated in an area which was eligible under Article 36(a)(ii) of Regulation (EC) No 1698/2005 during the 2007-2013 programming period in the Member States where the delimitation in accordance with Article 32(3) of Regulation (EU) No 1305/2013 is not yet completed;

3.

the majority of the utilised agricultural area of the holding is situated in a mountain area within the meaning of Article 32(2) of Regulation (EU) No 1305/2013;

5.

the majority of the utilised agricultural area of the holding is situated in a phasing-out area within the meaning of Article 31(5) of Regulation (EU) No 1305/2013.

A.CL.170.C. Altitude: The altitude should be indicated by the corresponding code number:

1.

the major part of the holding is located at < 300 m;

2.

the major part of the holding is located at 300 to 600 m;

3.

the major part of the holding is located at > 600 m;

4.

data not available.

A.CL.180.C. Structural Funds area: an indication is to be given of whether the majority of the utilised agricultural area of the holding is situated in an area covered by Article 90 paragraph 2 (a), (b) and (c) of Regulation (EU) No 1303/2013 of the European Parliament and of the Council [Regulation (EU) No 1303/2013 of the European Parliament and of the Council of 17 December 2013 laying down common provisions on the European Regional Development Fund, the European Social Fund, the Cohesion Fund, the European Agricultural Fund for Rural Development and the European Maritime and Fisheries Fund and laying down general provisions on the European Regional Development Fund, the European Social Fund, the Cohesion Fund and the European Maritime and Fisheries Fund and repealing Council Regulation (EC) No 1083/2006 ( OJ L 347, 20.12.2013, p. 320).]. The following code numbers are to be used:

1.

the majority of the utilised agricultural area of the holding is situated in a less developed region, within the meaning of Regulation (EU) No 1303/2013, in particular Article 90 paragraph 2 (a) thereof;

2.

the majority of the utilised agricultural area of the holding is situated in a more developed region, within the meaning of Regulation (EU) No 1303/2013, in particular Article 90 paragraph 2 (c) thereof;

3.

the majority of the utilised agricultural area of the holding is situated in transition region, within the meaning of Article 90 paragraph 2 (b) of Regulation (EU) No 1303/2013.

A.CL.190.C. Natura 2000 area: an indication is to be given of whether the majority of the utilised agricultural area of the holding is situated in areas related to the implementation of Council Directive 79/409/EEC [Council Directive 79/409/EEC of 2 April 1979 on the conservation of wild birds (OJ L 103, 25.4.1979, p. 1).] and Council Directive 92/43/EEC [Council Directive 92/43/EEC of 21 May 1992 on the conservation of natural habitats and of wild fauna and flora (OJ L 206, 22.7.1992, p. 7).] (Natura 2000). The following code numbers are to be used:

1.

the majority of the utilised agricultural area of the holding is not situated in an area eligible to Natura 2000 payments;

2.

the majority of the utilised agricultural area of the holding is situated in an area eligible to Natura 2000 payments.

A.CL.200.C. Water directive (Directive 2000/60/EC) area: an indication is to be given of whether the majority of the utilised agricultural area of the holding is situated in areas related to the implementation of Directive 2000/60/EC of the European Parliament and of the Council [Directive 2000/60/EC of the European Parliament and of the Council of 23 October 2000 establishing a framework for Community action in the field of water policy (OJ L 327, 22.12.2000, p. 1).]. The following code numbers are to be used:

1.

the majority of the utilised agricultural area of the holding is not situated in an area eligible to payments linked to Directive 2000/60/EC;

2.

the majority of the utilised agricultural area of the holding is situated in an area eligible to payments linked to Directive 2000/60/EC.

A.OT.210.C. Irrigation system: an indication is to be given on the main irrigation system applied in the farm:

0.

not applicable (when no irrigation on the farm)

1.

surface

2.

sprinkler

3.

drip

4.

other

This article is long: the rest is at the official publication.