An ‘EC’ certificate of verification for a subsystem that contains interoperability constituents which do not have an ‘EC’ declaration of conformity or suitability for use may be issued during a transitional period ending on 31 May 2017 provided the provisions laid down in Section 6.3 of the Annex are met.
The production or upgrade/renewal of the subsystem using non-certified interoperability constituents shall be completed within the transitional period set out in paragraph 1, including the placing in service.
During the transitional period set out in paragraph 1:
the reasons for non-certification of any interoperability constituents shall be properly identified by the notified body before granting the ‘EC’ certificate pursuant to Article 15 of Directive (EU) 2016/797;
the national safety authorities, pursuant to Article 16(2)(d) of Directive (EU) 2016/798 of the European Parliament and of the Council [Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety (OJ L 138, 26.5.2016, p. 102).], shall report on the use of non-certified interoperability constituents in the context of authorisation procedures in their annual report referred to in Article 19 of Directive (EU) 2016/798.
After one year from the entry into force of this Regulation, newly produced interoperability constituents shall be covered by the ‘EC’ declaration of conformity or suitability for use.