Art. 10 Commission Regulation (EU) No 1302/2014 of 18 November 2014 concerning a technical speci…

In forcesince 16 Jun 2019cited 1×
1.

In order to keep pace with technological progress, innovative solutions may be required, which do not comply with the specifications set out in the Annex and/or for which the assessment methods set out in the Annex cannot be applied. In that case, new specifications and/or new assessment methods associated with those innovative solutions shall be developed.

2.

Innovative solutions may be related to the rolling stock subsystem, its parts and its interoperability constituents.

3.

If an innovative solution is proposed, the manufacturer or his authorised representative established within the Union shall declare how it deviates from or complements to the relevant provisions of this TSI and submit the deviations to the Commission for analysis. The Commission may request the opinion of the European Railway Agency (the Agency) on the proposed innovative solution.

4.

The Commission delivers an opinion on the innovative solution proposed. If this opinion is positive, the appropriate functional and interface specifications and the assessment method, which need to be included in the TSI in order to allow the use of this innovative solution, shall be developed and subsequently integrated in the TSI during the revision process pursuant to Article 5 of Directive (EU) 2016/797. If the opinion is negative, the innovative solution proposed cannot be applied.

5.

Pending the review of the TSI, the positive opinion delivered by the Commission shall be considered as acceptable means of compliance with the essential requirements of Directive (EU) 2016/797 and may therefore be used for the assessment of the subsystem.