Annex I to Regulation (EC) No 1272/2008 is amended as follows:
A. Part 1 is amended as follows:
The following section 1.3.6 is inserted:
Substances or mixtures classified as corrosive to metals but not corrosive to skin and/or eyes which are in the finished state as packaged for consumer use do not require on the label the hazard pictogram GHS05.’
The following sections 1.5.2.4 and 1.5.2.5 are inserted:
1.5.2.4.1. The label elements required by Article 17 may be omitted from the inner packaging where:
the contents of the inner packaging do not exceed 10 ml;
the substance or mixture is placed on the market for supply to a distributor or downstream user for scientific research and development or quality control analysis; and
the inner packaging is contained within outer packaging that meets the requirements of Article 17.
1.5.2.4.2. Notwithstanding sections 1.5.1.2 and 1.5.2.4.1, the label on the inner packaging shall contain the product identifier and, where appropriate, the hazard pictograms “GHS01”, “GHS05”, “GHS06” and/or “GHS08”. Where more than two pictograms are assigned, “GHS06” and “GHS08” may take precedence over “GHS01” and “GHS05”.
1.5.2.5.
Section 1.5.2.4 shall not apply to substances or mixtures within the scope of Regulation (EC) No 1107/2009 or (EU) No 528/2012.’
B. Part 2 is amended as follows:
The second sentence in section 2.1.2.1 is replaced by the following:
‘The test methods are described in Part I of the UN RTDG, Manual of Tests and Criteria.’;
In point (f) of section 2.1.2.2, the word ‘detonating’ is deleted;
In section 2.1.2.3 and in the column entitled ‘Criteria’ of Table 2.1.1 the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
In section 2.1.3, the column entitled ‘Unstable Explosive’ of Table 2.1.2, the precautionary statement ‘P281’ is replaced by ‘P280’;
In the first paragraph and in the footnote to Figure 2.1.1 of section 2.1.4.1, the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
In the first paragraph of section 2.1.4.2, the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
In point (a) of section 2.1.4.3, the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
Sections 2.2 to 2.3.4.1 are replaced by the following:
2.2.1.1. Flammable gas means a gas or gas mixture having a flammable range with air at 20 °C and a standard pressure of 101,3 kPa.
2.2.1.2. A chemically unstable gas means a flammable gas that is able to react explosively even in the absence of air or oxygen.
2.2.2.1. A flammable gas shall be classified in this class in accordance with Table 2.2.1:
Aerosols shall not be classified as flammable gases; see section 2.3.
Category | Criteria
1 |
Gases, which at 20 °C and a standard pressure of 101,3 kPa:
are ignitable when in a mixture of 13 % or less by volume in air; or
have a flammable range with air of at least 12 percentage points regardless of the lower flammable limit.
2 | Gases, other than those of Category 1, which, at 20 °C and a standard pressure of 101,3 kPa, have a flammable range while mixed in air.
2.2.2.2. A flammable gas that is also chemically unstable shall additionally be classified in one of the two categories for chemically unstable gases using the methods described in Part III of the UN RTDG, Manual of Tests and Criteria according to the following table:
Category | Criteria
A | Flammable gases which are chemically unstable at 20 °C and a standard pressure of 101,3 kPa
B | Flammable gases which are chemically unstable at a temperature greater than 20 °C and/or a pressure greater than 101,3 kPa
Label elements shall be used for substances and mixtures meeting the criteria for classification in this hazard class in accordance with Table 2.2.3.
Classification | Flammable gas | Chemically unstable gas
Category 1 | Category 2 | Category A | Category B
GHS Pictogram | | No pictogram | No additional pictogram | No additional pictogram
Signal Word | Danger | Warning | No additional signal word | No additional signal word
Hazard Statement | H220: Extremely flammable gas | H221: Flammable gas | H230: May react explosively even in the absence of air | H231: May react explosively even in the absence of air at elevated pressure and/or temperature
Precautionary Statement Prevention | P210 | P210 | P202 | P202
Precautionary Statement Response |
P377
P381
P377
P381
Precautionary Statement Storage | P403 | P403 | |
Precautionary Statement Disposal | | | |
The classification procedure is set out in the following decision logic (see Figures 2.2.1 to 2.2.2).
2.2.4.1. Flammability shall be determined by tests or, for mixtures where there are sufficient data available, by calculation in accordance with the methods adopted by ISO (see ISO 10156 as amended, Gases and gas mixtures — Determination of fire potential and oxidising ability for the selection of cylinder valve outlet). Where insufficient data are available to use these methods, test method EN 1839 as amended (Determination of explosion limits of gases and vapours) may be used.
2.2.4.2. Chemical instability shall be determined in accordance with the method described in Part III of the UN RTDG, Manual of Tests and Criteria. If the calculations in accordance with ISO 10156 as amended show that a gas mixture is not flammable it is not necessary to carry out the tests for determining chemical instability for classification purposes.
Aerosols, this means aerosol dispensers, are any non-refillable receptacles made of metal, glass or plastics and containing a gas compressed, liquefied or dissolved under pressure, with or without a liquid, paste or powder, and fitted with a release device allowing the contents to be ejected as solid or liquid particles in suspension in a gas, as a foam, paste or powder or in a liquid state or in a gaseous state.
2.3.2.1. Aerosols shall be considered for classification as flammable in accordance with section 2.3.2.2 if they contain any component which is classified as flammable according to the following criteria set out in this Part:
Liquids with a flash point ≤ 93 °C, which includes Flammable Liquids according to section 2.6;
Flammable gases (see section 2.2);
Flammable solids (see section 2.7).
Flammable components do not cover pyrophoric, self-heating or water-reactive substances and mixtures because such components are never used as aerosol contents.
Aerosols do not fall additionally within the scope of sections 2.2 (flammable gases), 2.5 (gases under pressure), 2.6 (flammable liquids) and 2.7 (flammable solids). Depending on their contents, aerosols may however fall within the scope of other hazard classes, including their labelling elements.
2.3.2.2. An aerosol shall be classified in one of the three categories for this Class on the basis of its components, of its chemical heat of combustion and, if applicable, of the results of the foam test (for foam aerosols) and of the ignition distance test and enclosed space test (for spray aerosols) in accordance with Figures 2.3.1(a) to 2.3.1(c) of this Annex and subsections 31.4, 31.5 and 31.6 of Part III of the UN RTDG, Manual of Tests and Criteria. Aerosols which do not meet the criteria for inclusion in Category 1 or Category 2 shall be classified in Category 3.
Aerosols containing more than 1 % flammable components or with a heat of combustion of at least 20 kJ/g, which are not submitted to the flammability classification procedures in this section shall be classified as aerosols, Category 1.
Label elements shall be used for substances or mixtures meeting the criteria for classification in this hazard class in accordance with Table 2.3.1.
Classification | Category 1 | Category 2 | Category 3
GHS Pictograms | | | No pictogram
Signal Word | Danger | Warning | Warning
Hazard Statement |
H222: Extremely flammable aerosol
H229: Pressurised container: May burst if heated
H223: Flammable aerosol
H229: Pressurised container: May burst if heated
H229: Pressurised container: May burst if heated
Precautionary Statement Prevention |
P210
P211
P251
P210
P211
P251
P210
P251
Precautionary Statement Response | | |
Precautionary Statement Storage | P410 + P412 | P410 + P412 | P410 + P412
Precautionary Statement Disposal | | |
2.3.4.1. The chemical heat of combustion (ΔΗc), in kilojoules per gram (kJ/g), is the product of the theoretical heat of combustion (ΔΗcomb), and a combustion efficiency, usually less than 1,0 (a typical combustion efficiency is 0,95 or 95 %).
For a composite aerosol formulation, the chemical heat of combustion is the summation of the weighted heats of combustion for the individual components, as follows:
ΔHc product = Σinwi % × ΔHci
where:
ΔΗcchemical heat of combustion (kJ/g);
wi %mass fraction of component i in the product;
ΔΗc(i)specific heat of combustion (kJ/g)of component i in the product.
The chemical heats of combustion can be found in the literature, calculated or determined by tests (see ASTM D 240 as amended — Standard Test Methods for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter, EN/ISO 13943 as amended, 86.l to 86.3 — Fire safety — Vocabulary, and NFPA 30B as amended — Code for the Manufacture and Storage of Aerosol Products).’;
In section 2.4.2.1, the Note under Table 2.4.1 is replaced by the following:
“Gases which cause or contribute to the combustion of other material more than air does” means pure gases or gas mixtures with an oxidising power greater than 23,5 % as determined by a method specified in ISO 10156 as amended.’;
Section 2.4.4 is replaced by the following:
To classify an oxidising gas, tests or calculation methods as described in ISO 10156 as amended, “Gases and gas mixtures — Determination of fire potential and oxidising ability for the selection of cylinder valve outlet” shall be performed.’;
In section 2.5.1.1, the first paragraph is replaced by the following:
‘Gases under pressure are gases which are contained in a receptacle at a pressure of 200 kPa (gauge) or more at 20 °C, or which are liquefied or liquefied and refrigerated.’;
Section 2.5.2 is replaced by the following:
2.5.2.1. Gases under pressure shall be classified, according to their physical state when packaged, in one of four groups in accordance with Table 2.5.1:
Aerosols shall not be classified as gases under pressure. See section 2.3.’;
Group | Criteria
Compressed gas | A gas which when packaged under pressure is entirely gaseous at – 50 °C; including all gases with a critical temperature ≤ – 50 °C.
Liquefied gas |
A gas which, when packaged under pressure, is partially liquid at temperatures above – 50 °C. A distinction is made between:
high pressure liquefied gas: a gas with a critical temperature between – 50 °C and + 65 °C; and
low pressure liquefied gas: a gas with a critical temperature above + 65 °C.
Refrigerated liquefied gas | A gas which when packaged is made partially liquid because of its low temperature.
Dissolved gas | A gas which when packaged under pressure is dissolved in a liquid phase solvent.
In section 2.5.4, the second paragraph is replaced by the following:
‘Data can be found in the literature, calculated or determined by testing. Most pure gases are already classified in the UN RTDG, Model Regulations.’;
In sections 2.7.2.1 and 2.7.2.3, the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
The footnote relating to point (e) of section 2.8.2.1 is replaced by the following:
‘(1) See UN RTDG, Manual of Tests and Criteria, subsections 28.1, 28.2, 28.3 and Table 28.3.’;
In section 2.8.2.4, the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
In section 2.8.4.1, the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
In points (a) and (b) of 2.8.4.2, the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
In the introductory sentence of sections 2.9.2.1, 2.10.2.1, 2.11.2.1, 2.11.2.2, 2.12.2.1 and 2.13.2.1, the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
In section 2.13.4.4, the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
In the introductory sentence of section 2.14.2.1, the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
The footnote relating to point (g) of section 2.15.2.2 is replaced by the following:
‘(1) See UN RTDG, Manual of Tests and Criteria, subsections 28.1, 28.2, 28.3 and Table 28.3.’;
Section 2.15.2.3 is amended as follows:
the footnote relating to point (b) is replaced by the following: ‘(1) As determined by test series E as prescribed in UN RTDG, Manual of Tests and Criteria, Part II.’;
in the second paragraph, the words ‘UN Recommendation on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
In section 2.15.4.1, the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
In the introductory sentence of section 2.16.2.1, the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’;
In section 2.16.3, the following Note is inserted under Table 2.16.2:
Where a substance or mixture is classified as corrosive to metals but not corrosive to skin and/or eyes, the labelling provisions set out in section 1.3.6 shall be used.’;
In the introductory sentence of section 2.16.4.1, the words ‘UN Recommendations on the Transport of Dangerous Goods’ are replaced by ‘UN RTDG’.
C. Part 3 is amended as follows:
In section 3.1.2.1, Note (c) under Table 3.1.1 is replaced by the following:
‘(c) The ranges of the acute toxicity estimates (ATE) for inhalation toxicity used in the Table are based on 4-hour testing exposures. Conversion of existing inhalation toxicity data which have been generated using a 1-hour exposure can be carried out by dividing by a factor of 2 for gases and vapours and 4 for dusts and mists.’;
Sections 3.1.3.6.2.2 and 3.1.3.6.2.3 are replaced by the following:
‘3.1.3.6.2.2. In the event that a component without any useable information for classification is used in a mixture at a concentration ≥ 1 %, it is concluded that the mixture cannot be attributed a definitive acute toxicity estimate. In this situation the mixture shall be classified based on the known components only, with the additional statement on the label and in the SDS that “x per cent of the mixture consists of component(s) of unknown acute toxicity”, taking into account the provisions set out in section 3.1.4.2.
3.1.3.6.2.3. If the total concentration of the relevant ingredient(s) with unknown acute toxicity is ≤ 10 % then the formula presented in section 3.1.3.6.1 shall be used. If the total concentration of the relevant ingredient(s) with unknown toxicity is > 10 %, the formula presented in section 3.1.3.6.1 shall be corrected to adjust for the percentage of the unknown ingredient(s) as follows:
100 – Σ C unknown if > 10 %ATEmix = ΣnCiATEi’;
In section 3.1.4.1, Table 3.1.3 is replaced by the following:
Classification | Category 1 | Category 2 | Category 3 | Category 4
GHS Pictograms | | | |
Signal Word | Danger | Danger | Danger | Warning
Hazard Statement:
Oral
H300: Fatal if swallowed | H300: Fatal if swallowed | H301: Toxic if swallowed | H302: Harmful if swallowed
Dermal
H310:Fatal in contact with skin | H310:Fatal in contact with skin | H311: Toxic in contact with skin | H312: Harmful in contact with skin
Inhalation
(see Note 1)
H330:Fatal if inhaled | H330: Fatal if inhaled | H331: Toxic if inhaled | H332: Harmful if inhaled
Precautionary Statement Prevention (oral) |
P264
P270
P264
P270
P264
P270
P264
P270
Precautionary Statement Response (oral) |
P301 + P310
P321
P330
P301 + P310
P321
P330
P301 + P310
P321
P330
P301 + P312
P330
Precautionary Statement Storage (oral) | P405 | P405 | P405 |
Precautionary Statement Disposal (oral) | P501 | P501 | P501 | P501
Precautionary Statement Prevention (dermal) |
P262
P264
P270
P280
P262
P264
P270
P280
P280 | P280
Precautionary Statement Response (dermal) |
P302 + P352
P310
P321
P361 + P364
P302 + P352
P310
P321
P361 + P364
P302 + P352
P312
P321
P361 + P364
P302 + P352
P312
P321
P362 + P364
Precautionary Statement Storage (dermal) | P405 | P405 | P405 |
Precautionary Statement Disposal (dermal) | P501 | P501 | P501 | P501
Precautionary Statement Prevention (inhalation) |
P260
P271
P284
P260
P271
P284
P261
P271
P261
P271
Precautionary Statement Response (inhalation) |
P304 + P340
P310
P320
P304 + P340
P310
P320
P304 + P340
P311
P321
P304 + P340
P312
Precautionary Statement Storage (inhalation) |
P403 + P233
P405
P403 + P233
P405
P403 + P233
P405
Precautionary Statement Disposal (inhalation) | P501 | P501 | P501’ |
The following section 3.1.4.2 is inserted:
‘3.1.4.2. The acute toxicity hazard statements differentiate the hazard based on the route of exposure. Communication of acute toxicity classification should also reflect this differentiation. If a substance or mixture is classified for more than one route of exposure then all relevant classifications should be communicated on the safety data sheet as specified in Annex II to Regulation (EC) No 1907/2006 and the relevant hazard communication elements included on the label as prescribed in section 3.1.3.2. If the statement “x % of the mixture consists of ingredient(s) of unknown acute toxicity” is communicated, as prescribed in section 3.1.3.6.2.2, then, in the information provided in the safety data sheet, it can also be differentiated based on the route of exposure. For example, “x % of the mixture consists of ingredient(s) of unknown acute oral toxicity” and “x % of the mixture consists of ingredient(s) of unknown acute dermal toxicity”.’;
Section 3.2.3.3.5 is replaced by the following:
‘3.2.3.3.5. On occasion, reliable data may show that the skin corrosion/irritation hazard of an ingredient will not be evident when present at a level at or above the generic concentration limits mentioned in Tables 3.2.3 and 3.2.4 in section 3.2.3.3.6. In these cases the mixture shall be classified according to that data (see also Articles 10 and 11). On other occasions, when it is expected that the skin corrosion/irritation hazard of an ingredient is not evident when present at a level at or above the generic concentration limits mentioned in Tables 3.2.3 and 3.2.4, testing of the mixture shall be considered. In those cases the tiered weight of evidence strategy shall be applied, as set out in section 3.2.2.5.’;
In section 3.2.4, Table 3.2.5 is replaced by the following:
Classification | Category 1 A/1 B/1 C | Category 2
GHS Pictograms | |
Signal Word | Danger | Warning
Hazard Statement | H314: Causes severe skin burns and eye damage | H315: Causes skin irritation
Precautionary Statement Prevention |
P260
P264
P280
P264
P280
Precautionary Statement Response |
P301 + P330 + P331
P303 + P361 + P353
P363
P304 + P340
P310
P321
P305 + P351 + P338
P302 + P352
P321
P332 + P313
P362 + P364
Precautionary Statement Storage | P405 |
Precautionary Statement Disposal | P501’ |
Section 3.3.3.3.5 is replaced by the following:
‘3.3.3.3.5. On occasion, reliable data may show that the reversible/irreversible eye effects of an ingredient will not be evident when present at a level at or above the generic concentration limits mentioned in Tables 3.3.3 and 3.3.4 in section 3.3.3.3.6. In these cases the mixture shall be classified according to those data. On other occasions, when it is expected that the skin corrosion/irritation hazards or the reversible/irreversible eye effects of an ingredient will not be evident when present at a level at or above the generic concentration limits mentioned in Tables 3.3.3 and 3.3.4, testing of the mixture shall be considered. In those cases, the tiered weight of evidence strategy shall be applied.’;
In section 3.4.3.3.2, Note 1 under Table 3.4.6 is replaced by the following:
This concentration limit for elicitation is used for the application of the special labelling requirements of section 2.8 of Annex II to protect already sensitised individuals. A SDS is required for the mixture containing a component at or above this concentration. For sensitising substances with specific concentration limit lower than 0,1 %, the concentration limit for elicitation should be set at one tenth of the specific concentration limit.’;
In section 3.4.4, Table 3.4.7 is replaced by the following:
Classification | Respiratory sensitisation | Skin sensitisation
Category 1 and subcategories 1A and 1B | Category 1 and subcategories 1A and 1B
GHS Pictograms | |
Signal Word | Danger | Warning
Hazard Statement | H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled | H317: May cause an allergic skin reaction
Precautionary Statement Prevention |
P261
P284
P261
P272
P280
Precautionary Statement Response |
P304 + P340
P342 + P311
P302 + P352
P333 + P313
P321
P362 + P364
Precautionary Statement Storage | |
Precautionary Statement Disposal | P501 | P501’
In section 3.5.3.1.1, Table 3.5.2 is replaced by the following:
Ingredient classified as: | Concentration limits triggering classification of a mixture as:
Category 1 mutagen | Category 2 mutagen
Category 1A | Category 1B
Category 1A mutagen | ≥ 0,1 % | — | —
Category 1B mutagen | — | ≥ 0,1 % | —
Category 2 mutagen | — | — | ≥ 1,0 %’
In section 3.5.4.1, Table 3.5.3 is replaced by the following:
Classification |
Category 1
(Category 1A, 1B)
Category 2
GHS Pictograms | |
Signal Word | Danger | Warning
Hazard Statement | H340: May cause genetic defects (state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard) | H341: Suspected of causing genetic defects (state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard)
Precautionary Statement Prevention |
P201
P202
P280
P201
P202
P280
Precautionary Statement Response | P308 + P313 | P308 + P313
Precautionary Statement Storage | P405 | P405
Precautionary Statement Disposal | P501 | P501’
In section 3.6.3.1.1, Table 3.6.2 is replaced by the following:
Ingredient classified as: | Generic concentration limits triggering classification of a mixture as:
Category 1 carcinogen | Category 2 carcinogen
Category 1A | Category 1B
Category 1A carcinogen | ≥ 0,1 % | — | —
Category 1B carcinogen | — | ≥ 0,1 % | —