Art. 10a Commission Regulation (EU) No 321/2013 of 13 March 2013 concerning the technical specifi…

In forcesince 16 Jun 2019cited 2×
1.

In order to keep pace with technological progress, innovative solutions may be required that do not comply with the specifications set out in the Annex and/or for which the assessment methods set out in the Annex cannot be applied. In that case, new specifications and/or new assessment methods associated with those innovative solutions shall be developed.

2.

Innovative solutions may be related to the ‘rolling stock — freight wagons’ subsystem, its parts and its interoperability constituents.

3.

If an innovative solution is proposed, the manufacturer or his authorised representative established within the Union shall declare how it deviates from or complements the relevant provisions of this TSI and shall submit the deviations to the Commission for analysis.

4.

The Commission shall deliver an opinion on the innovative solution proposed. If this opinion is positive, the appropriate functional and interface specifications and the assessment method, which must be included in the TSI in order to allow the use of this innovative solution, shall be developed and subsequently integrated in the TSI during the revision process carried out pursuant to Article 5 of Directive (EU) 2016/797. If the opinion is negative, the innovative solution proposed shall not be applied.

5.

Pending the review of the TSI, the positive opinion delivered by the Commission shall be considered an acceptable means of compliance with the essential requirements of Directive (EU) 2016/797 and may therefore be used for the assessment of the subsystem.