3 ANNEX IIa Goods and technology referred to in Article 3(1), 3(3) and 3(5), Article 5(2), Article 8(4), Article 18(1), Article 31(1) and Article 45, Council Regulation (EU) No 267/2012 of 23 March 2012 concerning restrictive measures aga…

In forcesince 1 Apr 2026
1.

Unless otherwise stated, reference numbers used in the column below entitled “Description” refer to the descriptions of dual use items and technology set out in Annex I to Regulation (EU) 2021/821.

2.

A reference number in the column below entitled “Related item from Annex I to Regulation (EU) 2021/821” means that the characteristics of the item described in the “Description” column lie outside the parameters set out in the description of the dual use entry referred to.

3.

Definitions of terms between ‘single quotation marks’ are given in a technical note to the relevant item.

4.

Definitions of terms between “double quotation marks” can be found in Annex I to Regulation (EU) 2021/821.

1.

The object of the controls contained in this Annex should not be defeated by the export of any non-controlled goods (including plant) containing one or more controlled components when the controlled component or components is/are the principal element of the goods and can feasibly be removed or used for other purposes.

N.B.: In judging whether the controlled component or components is/are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the controlled component or components as the principal element of the goods being procured.

2.

The goods specified in this Annex include both new and used goods.

1.

The sale, supply, transfer or export of “technology” which is “required” for the “use” of goods the sale, supply, transfer or export of which is controlled in Part A (Goods) below, is controlled in accordance with the provisions of Section III.B.

2.

The sale, supply, transfer or export of “technology” which is “required” for the “development” or “production” of goods the sale, supply, transfer or export of which is controlled in Part A (Goods) below, is prohibited in accordance with the provisions of Annex II, Section II.B.

3.

The “technology” “required” for the “use” of goods under control remains under control even when it is applicable to non-controlled goods.

4.

Controls do not apply to that “technology” which is the minimum necessary for the installation, operation, maintenance (checking) and repair of those goods which are not controlled or the export of which has been authorised in accordance with Regulation (EC) No 423/2007, Regulation (EU) No 961/2010 or this Regulation.

5.

Controls on “technology” transfer do not apply to information “in the public domain”, to “basic scientific research” or to the minimum necessary information for patent applications.

A0. Nuclear Materials, Facilities, and Equipment

No | Description | Related item from Annex I to Regulation (EU) 2021/821

III.

A0.015 |

‘Glove Boxes’, specially designed for radioactive isotopes, radioactive sources or radionuclides.

‘Glove Boxes’ means equipment providing protection to the user, from hazardous vapour, particles or radiation, from materials inside the equipment being handled or processed by a person outside the equipment, by means of manipulators or gloves integrated into the equipment.

0B006

III.

A0.016 | Toxic gas monitoring systems designed for continuous operation and detection of hydrogen sSulphide, and specially designed detectors therefore. |

0A001

0B001.c

III.

A0.017 | Helium leak detectors. |

0A001

0B001.c

A1. Materials, chemicals, ‘micro-organisms’ and ‘toxins’

No | Description | Related item from Annex I to Regulation (EU) 2021/821

III.

A1.003 |

Ring-shaped seals and gaskets, having an inner diameter of 650 mm or less, made of any of the following materials:

a.

Copolymers of vinylidene fluoride having 75 % or more beta crystalline structure without stretching;

b.

Fluorinated polyimides containing 10 % by weight or more of combined fluorine;

c.

Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine;

d.

Polychlorotrifluoroethylene (PCTFE, e.g. Kel-F ®);

e.

Fluoro-elastomers (e.g., Viton ®, Tecnoflon ®);

f.

Polytetrafluoroethylene (PTFE).

III.

A1.004 |

Personal equipment for detecting radiation of nuclear origin, including personal dosimeters.

Note: This item does not cover nuclear detection systems defined in item 1A004.c.

1A004.c

III.

A1.020 |

Steel alloys in sheet or plate form, having any of the following characteristics:

(a)

Steel alloys ‘capable of’ ultimate tensile strength of 1200 MPa or more, at 293 K (20 oC); or

(b)

Nitrogen-stabilised duplex stainless steel.

Note: The phrase alloys ‘capable of’ encompasses alloys before or after heat treatment.

‘Nitrogen-stabilised duplex stainless steel’ has a two-phase microstructure consisting of grains of ferritic and austenitic steel with the addition of nitrogen to stabilise the microstructure.

1C116

1C216

III.

A1.021 | Carbon-Carbon composite material. | 1A002.b.1

III.

A1.022 | Nickel alloys in crude or semi-fabricated form, containing 60 % by weight or more nickel. | 1C002.c.1.a

III.

A1.023 |

Titanium alloys in sheet or plate form ‘capable of’ an ultimate tensile strength of 900 MPa or more at 293 K (20 oC).

Note: The phrase alloys ‘capable of’ encompasses alloys before or after heat treatment.

1C002.b.3

III.

A1.024 |

Propellants and constituent chemicals for propellants as follows:

a.

Toluene Diisocyanate (TDI);

b.

Methyl Diphenyl Diisocyanate (MDI);

c.

Isophorone Diiscocyanate (IPDI);

d.

Sodium perchlorate;

e.

Xylidine;

f.

Hydroxy Terminated Polyether (HTPE); or

g.

Hydroxy Terminated Caprolactone Ether (HTCE).

This item refers to pure substance and any mixture containing at least 50 % of one of the chemicals mentioned above.

1C111

III.

A1.025 |

‘Lubricating materials’ containing, as their principal ingredients, any of the following:

a.

Perfluoroalkylether, (CAS 60164-51-4);

b.

Perfluoropolyalkylether, PFPE, (CAS 6991-67-9).

‘Lubricating materials’ means oils and fluids.

1C006

III.

A1.026 | Beryllium-copper or copper-beryllium alloys in plate, sheet, strip or rolled bar form, having a composition comprising copper as the major element by weight and other elements including less than 2 % by weight beryllium. | 1C002.b

A2. Materials Processing

No | Description | Related item from Annex I to Regulation (EU) 2021/821

III.

A2.008 |

Liquid-liquid contacting equipment (mixer-settlers, pulsed columns, centrifugal contactors); and liquid distributors, vapour distributors or liquid collectors designed for such equipment, where all surfaces that come in direct contact with the chemical(s) being processed are made from stainless steel.

N.B. see also II.A2.014.

Note: for stainless steel with more than 25 % nickel and 20 % chromium by weight see entry II.A2.014.a

2B350.e

III.

A2.009 |

Industrial equipment and components, other than those specified in 2B350.d, as follows:

N.B. see also II.A2.015.

Heat exchangers or condensers with a heat transfer surface area greater than 0,05 m2, and less than 30 m2; and tubes, plates, coils or blocks (cores) designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the fluid(s) are made from stainless steel.

Note 1: For stainless steel with more than 25 % nickel and 20 % chromium by weight see entry II.A2.015a.

Note 2: This item does not cover vehicle radiators.

The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the heat exchanger.

2B350.d

III.

A2.010 |

Multiple-seal, and seal-less pumps, other than those specified in 2B350.i, suitable for corrosive fluids, with manufacturer’s specified maximum flow-rate greater than 0,6 m3/hour, or vacuum pumps with manufacturer’s specified maximum flow-rate greater than 5 m3/hour [measured under standard temperature (273 K or 0 oC) and pressure (101,3 kPa) conditions]; and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come in direct contact with the chemical(s) being processed are made from stainless steel.

N.B. see also II.A2.016.

Note: for stainless steel with more than 25 % nickel and 20 % chromium by weight see entry II.A2.016a.

The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the pump.

2B350.i

III.

A2.017 |

Electrical Discharge Machine (EDM) tools for removing or cutting metals, ceramics or “composites”, as follows, and specially designed ram, sinker or wire electrodes therefor:

a.

Ram or sinker electrode Electrical Discharge Machines;

b.

Wire electrode Electrical Discharge Machines.

Note: Electrical Discharge Machines are also known as Spark Erosion Machines or Wire Erosion Machines.

2B001.d

III.

A2.018 | Computer controlled or “numerically controlled” co-ordinate measuring machines (CMM), or dimensional inspection machines, having a three dimensional (volumetric) maximum permissible error of indication (MPPE) at any point in the operating range of the machine (i.e. within the length axes) equal to or less (better) than (3 + L/1000) μm (L is the measured length in mm), tested according to ISO 10360-2 (2001), and measurement probes designed therefor. |

2B006.a

2B206.a

III.

A2.019 | Computer controlled or “numerically controlled” Electron Beam Welding Machines, and specially designed components therefor. | 2B001.e.1.b

III.

A2.020 | Computer controlled or “numerically controlled” Laser Welding and Laser Cutting Machines, and specially designed components therefor. | 2B001.e.1.c

III.

A2.021 | Computer controlled or “numerically controlled” Plasma Cutting Machines, and specially designed components therefor. | 2B001.e.1

III.

A2.022 | Vibration Monitoring Equipment specially designed for rotors or rotating equipment and machinery, capable of measuring any frequency in the range 600-2000 Hz. | 2B116

III.

A2.023 | Liquid ring vacuum pumps, and specially designed components therefore. |

2B231

2B350.i

III.

A2.024 |

Rotary vane vacuum pumps, and specially designed components therefore.

Note 1: III.A2.024 does not control rotary vane vacuum pumps that are specially designed for specific other equipment.

Note 2: The control status of rotary vane vacuum pumps that are specially designed for specific other equipment is determined by the control status of the other equipment.

2B231

2B235.i

0B002.f

III.

A2.025 |

Air filters, as follows, having one or more physical size dimension exceeding 1000 mm:

a.

High Efficiency Particulate Air (HEPA) filters;

b.

Ultra-Low Penetration Air (ULPA) filters.

Note: III.A2.025 does not control air filters specially designed for medical equipment.

2B352.d

A3. Electronics

No | Description | Related item from Annex I to Regulation (EU) 2021/821

III.

A3.004 | Spectrometers and diffractometers, designed for the indicative test or quantitative analysis of the elemental composition of metals or alloys without chemical decomposition of the material. |

III.

A3.005 |

‘Frequency changers’, frequency generators and variable speed electrical drives, having all the following characteristics:

a.

Multiphase output power of 10 W or greater;

b.

Capable of operating at a frequency of 600 Hz or more; and

c.

Frequency control better (less) than 0,2 %.

‘Frequency Changers’ includes frequency converters and frequency inverters.

1.

Item III.A3.005 does not control frequency changers that include communication protocols or interfaces designed for specific industrial machinery (such as machine tools, spinning machines, printed circuit board machines) so that the frequency changers cannot be used for other purposes while meeting the performance characteristics above.

2.

Item III.A3.005 does not control frequency changers specially designed for vehicles and which operate with a control sequence that is mutually communicated between the frequency changer and the vehicle control unit.

3A225

0B001.b.13

A6. Sensors and Lasers

No | Description | Related item from Annex I to Regulation (EU) 2021/821

III.

A6.012 |

‘Vacuum pressure gauges’, being electrically powered and having measurement accuracy of 5 % or less (better).

‘Vacuum pressure gauges’ include Pirani Gauges, Penning Gauges and Capacitance Manometers.

0B001.b

III.

A6.013 |

Microscopes and related equipment and detectors, as follows:

a.

Scanning Electron Microscopes;

b.

Scanning Auger Microscopes;

c.

Transmission Electron Microscopes;

d.

Atomic Force Microscopes;

e.

Scanning Force Microscopes;

f.

Equipment and detectors, specially designed for use with the microscopes specified in III.A6.013 a) to e) above, employing any of the following materials analysis techniques:

1.

X-ray Photo Spectroscopy (XPS);

2.

Energy-dispersive X-ray Spectroscopy (EDX, EDS); or

3.

Electron Spectroscopy for Chemical Analysis (ESCA).

6B

A7. Navigation and Avionics

No | Description | Related item from Annex I to Regulation (EU) 2021/821

III.

A7.002 | Accelerometers containing piezoelectric ceramic transducer element, having a sensitivity of 1000 mV/g or better (higher) | 7A001

A9. Aerospace and Propulsion

No | Description | Related item from Annex I to Regulation (EU) 2021/821

III.

A9.002 |

‘Load Cells’ capable of measuring rocket motor thrust having a capacity exceeding 30 kN.

‘Load Cells’ means devices and transducers for the measurement of force in both tension and in compression.

Note: III.A9.002 does not include equipment, devices or transducers, specially designed for the measurement of the weight of vehicles, e.g. weigh bridges.

9B117

III.

A9.003 |

Electrical power generation gas turbines, components and related equipment as follows:

a.

Gas turbines specially designed for electrical power generation, having an output exceeding 200 MW;

b.

Vanes, stators, combustion chambers and fuel injection nozzles, specially designed for electrical power generation gas turbines specified in III.A9.003.a;

c.

Equipment specially designed for the “development” and “production” of electrical power generation gas turbines specified in III. A9.003.a.

9A001

9A002

9A003

9B001

9B003

9B004

No | Description | Related item from Annex I to Regulation (EU) 2021/821

III.

B.001 |

‘Technology’ required for the use of the items in Part III.A. (Goods) above.

The term ‘technology’ includes software.