Art. 5 Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulati…

Application for EU type-approval of an engine system or engine family as a separate technical unit with regard to emissions

In forcesince 1 Jan 2021cited 7×
1.

The manufacturer shall submit to the approval authority an application for EC type-approval of an engine system or engine family as a separate technical unit.

2.

The application referred to in paragraph 1 shall be drawn up in accordance with the model of the information document set out in Appendix 4 to Annex I. For that purpose Part 1 of that Appendix shall apply.

3.

Together with the application, the manufacturer shall provide a documentation package that fully explains any element of design which affects emissions, the emission control strategy of the engine system, the means by which the engine system controls the output variables which have a bearing upon emissions, whether that control is direct or indirect, anti-tampering measures and fully explains the warning and inducement system required by Sections 4 and 5 of Annex XIII. The documentation package shall be identified and dated by the approval authority and kept by that authority for at least 10 years after the approval is granted.

The documentation package shall consist of the following parts:

the information set out in Section 8 to Annex I,

an AES documentation package, as described in Appendix 11 of Annex I to this Regulation in order for the approval authorities to be able to assess the proper use of AES.

At the request of the manufacturer, the approval authority shall conduct a preliminary assessment of the AES for new vehicle types. In that case, the manufacturer shall provide the draft AES documentation package to the approval authority between 2 and 12 months before the start of the type-approval process.

The approval authority shall make a preliminary assessment on the basis of the draft AES documentation package provided by the manufacturer. The approval authority shall make the preliminary assessment in accordance with the methodology described in Appendix 2 of Annex VI. The approval authority may deviate from that methodology in exceptional and duly justified cases.

The preliminary assessment of the AES for new vehicle types shall remain valid for the purposes of type approval for a period of 18 months. That period may be extended by a further 12 months if the manufacturer provides the approval authority with proof that no new technologies have become available on the market that would change the preliminary assessment of the AES.

A list of AES which were deemed non-acceptable by approval authorities shall be compiled yearly by the Forum for Exchange of Information on Enforcement and made available to the public by the Commission.

4.

In addition to the information referred to in paragraph 3, the manufacturer shall submit the following information:

(a)

in the case of positive-ignition engines, a declaration by the manufacturer of the minimum percentage of misfires out of a total number of firing events that either would result in emissions exceeding the limits set out in Annex X if that percentage of misfire had been present from the start of the emission test as set out in Annex III or could lead to an exhaust catalyst, or catalysts, overheating prior to causing irreversible damage;

(b)

a description of the provisions taken to prevent tampering with and modification of the emission control computer(s) including the facility for updating using a manufacturer-approved programme or calibration;

(c)

documentation of the OBD system, in accordance with the requirements set out in Section 5 to Annex X;

(d)

OBD related information for the purpose of access to OBD and repair and maintenance information, in accordance with the requirements of this Regulation;

(e)

a Statement of Off-Cycle Emission compliance with the requirements of Article 14 and Section 9 to Annex VI;

(f)

a Statement of OBD in-use Performance compliance with the requirements of Appendix 6 to Annex X;

(g)

the Certificate on Access to Vehicle OBD and Vehicle Repair and Maintenance Information;

(h)

the initial plan for in-service testing according to point 2.4 of Annex II;

(i)

where appropriate, copies of other type-approvals with the relevant data to enable extension of approvals and establishment of deterioration factors;

(j)

where appropriate, the documentation packages necessary for the correct installation of the engine type-approved as a separate technical unit.

5.

The manufacturer shall submit to the technical service responsible for the type-approval tests an engine or, as appropriate, a parent engine representative of the type to be approved.

6.

Changes to the make of a system, component or separate technical unit that occur after a type-approval shall not automatically invalidate a type-approval, unless its original characteristics or technical parameters are changed in such a way that the functionality of the engine or pollution control system is affected.