9 2. DETAILED DESCRIPTION OF THE AID › 2.1. The project, Decision_act (EU) 2010/358

In forcesince 27 Jan 2010

The purpose of the overall aid project (regional aid granted under approved aid schemes plus the notified SME bonus) was to build a new 30 MWp plant (Sovello1) to manufacture solar modules (ProdCom code 32.10.52.37) based on the String-Ribbon technology [The String-Ribbon technology is a continuous process whereby long wires unwind from spools, run through a silicon melt and pull a long ‘ribbon’ of silicon out of this melt. The ribbon is harvested periodically and cut into smaller pieces (solar wafers). The wafers are then cleaned and undergo further processing (POCl3-diffusion, etching, SiN-antireflexcoating, metallisation and conditioning) into solar cells. The last stage consists in the assembly of the cells into solar modules (panels).]. The new plant was Sovello’s first production site. The construction started in December 2004. The factory was intended to have a nominal production capacity of 30 Megawatt peak [One Megawatt peak (MWp) corresponds to 1000000 Watt peak (Wp). Watt peak is a measurement unit for the capacity (nominal output) of solar cells and solar modules. Watt peak is the standard usually used in the photovoltaic industry to measure the technical capacity of solar modules; it expresses the nominal output of the module under standard test conditions.] and to be functional by 31 December 2007. Sovello1 already started production in April 2006.