Regardless of whether or not wastes are included on this list, they may not be subject to the general information requirements laid down in Article 18 if they are contaminated by other materials to an extent which
increases the risks associated with the wastes sufficiently to render them appropriate for submission to the procedure of prior written notification and consent, when taking into account the hazardous characteristics listed in Annex III to Directive 91/689/EEC; or
prevents the recovery of the wastes in an environmentally sound manner.
The following wastes will be subject to the general information requirements laid down in Article 18:
Wastes listed in Annex IX to the Basel Convention [Annex IX to the Basel Convention is listed in this Regulation in Annex V, Part 1, List B.].
For the purposes of this Regulation:
Any reference in Annex IX of the Basel Convention to list A shall be understood as a reference to Annex IV to this Regulation;
in Basel entry B1020, the term ‘bulk finished form’ includes all metallic non-dispersible [‘Non-dispersible’ does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.] forms of the scrap listed therein;
Basel entry B1030 shall read: ‘Residues containing refractory metals’;
the part of Basel entry B1100 that refers to ‘Slags from copper processing’ etc., does not apply and (OECD) entry GB040 in Part II applies instead;
Basel entry B1110 does not apply and (OECD) entries GC010 and GC020 in Part II apply instead;
Basel entry B2050 does not apply and (OECD) entry GG040 in Part II applies instead;
For waste shipped within the Union, Basel entry B3011 does not apply and the following entry applies instead:
EU3011 Plastic waste (note the related entry AC300 in part II of Annex IV, and the related entry EU48 in part I of Annex IV):
Plastic waste listed below, provided it is almost free from contamination and other types of waste [In relation to ‘almost free from contamination and other types of wastes’, international and national specifications may offer a point of reference.]:
Plastic waste almost exclusively [In relation to ‘almost exclusively’, international and national specifications may offer a point of reference.] consisting of one non-halogenated polymer, including but not limited to the following polymers:
Polyethylene (PE)
Polypropylene (PP)
Polystyrene (PS)
Acrylonitrile butadiene styrene (ABS)
Polyethylene terephthalate (PET)
Polycarbonates (PC)
Polyethers
Plastic waste almost exclusively [In relation to ‘almost exclusively’, international and national specifications may offer a point of reference.] consisting of one cured resin or condensation product, including but not limited to the following resins:
Urea formaldehyde resins
Phenol formaldehyde resins
Melamine formaldehyde resins
Epoxy resins
Alkyd resins
Plastic waste almost exclusively [In relation to ‘almost exclusively’, international and national specifications may offer a point of reference.] consisting of one of the following fluorinated polymers [Post consumer wastes are excluded]:
Perfluoroethylene/propylene (FEP)
Perfluoroalkoxy alkanes:
Tetrafluoroethylene/perfluoroalkyl vinyl ether (PFA)
Tetrafluoroethylene/perfluoromethyl vinyl ether (MFA)
Polyvinylfluoride (PVF)
Polyvinylidenefluoride (PVDF)
Polytetrafluoroethylene (PTFE)
Polyvinyl chloride (PVC).
The following wastes will also be subject to the general information requirements laid down in Article 18:
GB040 |
7112
262030
262090
Slags from precious metals and copper processing for further refining
[Entry GC010 shall apply only for waste shipped within the Union.] [Entry GC020 shall apply only for waste shipped within the Union.]
GC010 | | Electrical assemblies consisting only of metals or alloys
GC020 | | Electronic scrap (e.g. printed circuit boards, electronic components, wire, etc.) and reclaimed electronic components suitable for base and precious metal recovery
GC030 | ex 890800 | Vessels and other floating structures for breaking up, properly emptied of any cargo and other materials arising from the operation of the vessel which may have been classified as a dangerous substance or waste
GC050 | | Spent fluid catalytic cracking (FCC) catalysts (e.g. aluminium oxide, zeolites)
GE020 |
ex 7001
ex 701939
Glass fibre waste
GF010 | | Ceramic wastes which have been fired after shaping, including ceramic vessels (before and/or after use)
GG030 | ex 2621 | Bottom ash and slag tap from coal fired power plants
GG040 | ex 2621 | Coal fired power plants fly ash
GH013 |
391530
ex 390410—40
Polymers of vinyl chloride
GN010 | ex 050200 | Waste of pigs', hogs' or boars' bristles and hair or of badger hair and other brush making hair
GN020 | ex 050300 | Horsehair waste, whether or not put up as a layer with or without supporting material
GN030 | ex 050590 | Waste of skins and other parts of birds, with their feathers or down, of feathers and parts of feathers (whether or not with trimmed edges) and down, not further worked than cleaned, disinfected or treated for preservation
Regardless of whether or not mixtures are included on this list, they may not be subject to the general information requirements laid down in Article 18 if they are contaminated by other materials to an extent which:
increases the risks associated with the wastes sufficiently to render them appropriate for submission to the procedure of prior written notification and consent, when taking into account the hazardous characteristics listed in Annex III to Directive 91/689/EEC; or
prevents the recovery of the wastes in an environmentally sound manner.
The following mixtures of wastes are included in this Annex:
mixtures of wastes classified under Basel entries B1010 and B1050;
mixtures of wastes classified under Basel entries B1010 and B1070;
mixtures of wastes classified under Basel entries B3040 and B3080;
mixtures of wastes classified under (OECD) entry GB040 and under Basel entry B1100 restricted to hard zinc spelter, zinc-containing drosses, aluminium skimmings (or skims) excluding salt slag and wastes of refractory linings, including crucibles, originating from copper smelting;
mixtures of wastes classified under (OECD) entry GB040, under Basel entry B1070 and under Basel entry B1100 restricted to wastes of refractory linings, including crucibles, originating from copper smelting.
The entries referred to in points (d) and (e) shall not apply for exports to countries to which the OECD Decision does not apply.
The following mixtures of wastes classified under separate indents or sub-indents of one single entry are included in this Annex:
mixtures of wastes classified under Basel entry B1010;
mixtures of wastes classified under Basel entry B2010;
mixtures of wastes classified under Basel entry B2030;
mixtures of wastes classified under Basel entry B3010 and listed under Scrap plastic of non-halogenated polymers and copolymers;
mixtures of wastes classified under Basel entry B3010 and listed under Cured waste resins or condensation products;
mixtures of wastes classified under Basel entry B3010 and listed under Perfluoro alkoxyl alkane;
mixtures of wastes classified under Basel entry B3020 restricted to unbleached paper or paperboard or of corrugated paper or paperboard, other paper or paperboard, made mainly of bleached chemical pulp, not coloured in the mass, paper or paperboard made mainly of mechanical pulp (for example, newspapers, journals and similar printed matter);
mixtures of wastes classified under Basel entry B3030;
mixtures of wastes classified under Basel entry B3040;
mixtures of wastes classified under Basel entry B3050.
The following mixtures of wastes classified under separate indents or sub-indents of one single entry are included in this Annex only for the purposes of shipments within the Union:
mixtures of wastes classified under entry EU3011 and listed under the indent referring to non-halogenated polymers;
mixtures of wastes classified under entry EU3011 and listed under the indent referring to cured resins or condensation products;
mixtures of wastes classified under entry EU3011 and listed under ‘perfluoroalkoxy alkanes’.
Regardless of whether or not wastes are included on this list, they may not be subject to the general information requirements laid down in Article 18 if they are contaminated by other materials to an extent which:
increases the risks associated with the wastes sufficiently to render them appropriate for submission to the procedure of prior written notification and consent, when taking into account the hazardous characteristics listed in Annex III to Directive 2008/98/EC of the European Parliament and of the Council [OJ L 312, 22.11.2008, p. 3.]; or
prevents the recovery of the wastes in an environmentally sound manner.
The following wastes are included in this Annex:
BEU01Pressure sensitive adhesive label laminate waste containing raw materials used in label material production not covered by Basel entry B3020
BEU02Non-separable plastic fraction from the pre-treatment of used liquid packages
BEU03Non-separable plastic-aluminium fraction from the pre-treatment of used liquid packages
BEU04Composite packaging consisting of mainly paper and some plastic, not containing residues and not covered by Basel entry B3020
BEU05Clean biodegradable waste from agriculture, horticulture, forestry, gardens, parks and cemeteries
The shipments of waste listed in this Annex are without prejudice to the provisions of Council Directive 2000/29/EC [OJ L 169, 10.7.2000, p. 1.], including measures adopted pursuant to Article 16(3) thereof.