Art. 7 Directive (EU) 2006/42

Presumption of conformity and harmonised standards

In forcecited 14×
1.

Member States shall regard machinery bearing the CE marking and accompanied by the EC declaration of conformity, the content of which is set out in Annex II, part 1, Section A, as complying with the provisions of this Directive.

2.

Machinery manufactured in conformity with a harmonised standard, the references to which have been published in the Official Journal of the European Union, shall be presumed to comply with the essential health and safety requirements covered by such a harmonised standard.

3.

The Commission shall publish in the Official Journal of the European Union the references of the harmonised standards.

4.

Member States shall take the appropriate measures to enable the social partners to have an influence at national level on the process of preparing and monitoring the harmonised standards.

The 10 that are cited most themselves, of 14.

  • Decision_act (EU) 2023/1586Law

    … 24.], και ιδίως το άρθρο 7 παράγραφος 3, Εκτιμώντας τα ακόλουθα:

  • Judgment of the General Court (Third Chamber) of 15 July 2015. CSF Srl v European Commission.Decision

    To that end, Directive 2006/42 prohibits Member States from, inter alia, impairing the free movement of machinery within the European Union, if the machinery meets conditions permitting the assumption to be made that it complies with the …

    15 Jul 2015 · 62013TJ0337

  • Judgment of the General Court (Second Chamber) of 26 January 2017. Global Garden Products Italy SpA (GGP Italy) v European Commission.Decision

    For their part, by referring to Directive 2006/42, the Latvian authorities made clear that Article 5 provided that the manufacturer of machinery or his authorised representative must ensure, before placing it on the market, that it …

    26 Jan 2017 · 62015TJ0474

  • Judgment of the General Court (Second Chamber) of 8 September 2021 (Extracts). Brunswick Bowling Products LLC v European Commission.Decision

    As a preliminary point, it should be noted that Article 7(1) and (2) of Directive 2006/42 provides, inter alia, that Member States are to consider machinery bearing the CE marking and accompanied by the EC declaration of conformity to …

    8 Sep 2021 · 62019TJ0152

  • Arrêt du Tribunal (troisième chambre) du 3 mai 2018. Grizzly Tools GmbH & Co.KG contre Commission européenne.Decision

    D’une part, la requérante fait valoir que, le nettoyeur haute pression en cause portant le marquage « CE » accompagné d’une déclaration CE de conformité, il satisfait aux dispositions de la directive 2006/42, au sens de son …

    3 May 2018 · 62016TJ0168

  • Judgment of the Court (Eighth Chamber) of 23 March 2023. Syndicat Uniclima v Ministre de l'Intérieur.Decision

    This request for a preliminary ruling concerns the interpretation of Article 6(1) and Article 7(1) of Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (OJ 2006 …

    23 Mar 2023 · 62021CJ0653

  • Decision_act (EU) 2026/546Law

    … 24, ELI: http://data.europa.eu/eli/dir/2006/42/oj.], και ιδίως το άρθρο 7 παράγραφος 3, Εκτιμώντας τα ακόλουθα:

  • Decision_act (EU) 2026/80Law

    В съответствие с член 7 от Директива 2006/42/ЕО се счита, че машина, произведена съгласно даден хармонизиран стандарт, данните за който …

  • Decision_act (EU) 2025/1740Law

    … 24, ELI: http://data.europa.eu/eli/dir/2006/42/oj.], και ιδίως το άρθρο 7 παράγραφος 3, Εκτιμώντας τα ακόλουθα:

  • Decision_act (EU) 2024/2408Law

    … 24, ELI: http://data.europa.eu/eli/dir/2006/42/oj.], και ιδίως το άρθρο 7 παράγραφος 3, Εκτιμώντας τα ακόλουθα: