Decision_act (EU) 2005/614
2005/614/EC: Council Decision of 18 July 2005 on the accession of the European Community to United Nations Economic Commission for Europe Regulation No 94 on provisions concerning the approval of vehicles with regard to the protection of the occupants in the event of a frontal collision and Regulation No 95 on provisions concerning the approval of vehicles with regard to the protection of the occupants in the event of a lateral collision (Text with EEA relevance)
In forceTypedecision actDate18 Jul 2005Since13 Jan 2005Articles3Versions held46
- Preamble
- Recital 1
- Recital 2
- Recital 3
- 1
- 2
- 3
- 1 ANNEX
- ANNEX 2 Arrangements of the approval mark
- ANNEX 3 Test procedure 1. INSTALLATION AND PREPARATION OF THE VEHICLE
- ANNEX 4 Determination of performance criteria
- ANNEX 5 Arrangement and installation of dummies and adjustment of restraint systems
- ANNEX 6
- 8 Appendix 1 Description of the three-dimensional ‘H’ point machine ( 8 )
- 9 Appendix 2 Three-dimensional reference system
- 10 Appendix 3 Reference data concerning seat positions
- ANNEX 7 Test procedure with trolley
- 12 Appendix Equivalence curve – tolerance band for curve ΔV = f(t)
- ANNEX 8 Technique of measurement in measurement tests: instrumentation
- ANNEX 9 Definition of deformable barrier
- ANNEX 10 Certification of procedure for the dummy lower leg and foot
- 16 Regulation No 95 Uniform provisions concerning the approval of vehicles with regard to the protection of th
- ANNEX 1 (Maximum format: A4 (210 x 297 mm))
- ANNEX 2 Arrangements of the approval mark
- ANNEX 3
- 20 Appendix 1 Description of the three-dimensional ‘H’ point machine ( 18 )
- 21 Appendix 2 Three-dimensional reference system
- 22 Appendix 3 Reference data concerning seating positions
- ANNEX 4 Collision test procedure
- 24 Appendix 1 Determination of performance data
- 25 Appendix 2 The procedure for calculating the viscous criterion for Eurosid 1
- ANNEX 5 Mobile deformable barrier characteristics
- 27 Appendix 1 Force deflection curves for static tests
- 28 Appendix 2 Force deflection curves for dynamic tests
- ANNEX 6 Technical description of the side impact dummy
- ANNEX 7 Installation of the side impact dummy
- ANNEX 8 Partial test 1. PURPOSE
Source: EU legislation in force, consolidated versions and treaties (Cellar, Publications Office). Official publication. Reuse: Reuse authorised (Commission Decision 2011/833/EU).