ANNEX IV, Decision_act (EU) 2005/270

In forcesince 26 Apr 2019cited 1×

The objectives of the quality check report are as follows:

1.

Evaluate the methodology to report on the annual consumption of lightweight plastic carrier bags;

2.

Evaluate the quality of data on reusable packaging;

3.

Check the comprehensiveness of Member State application of the definition of packaging waste, in particular as regards data on packaging waste generation;

4.

Evaluate the quality of data collection processes, including the scope and validation of administrative data sources and the statistical validity of survey-based approaches;

5.

Understand the reasons for significant changes in reported data between reference years and ensure confidence in the accuracy of that data;

6.

Ensure the application of the rules and common methodologies to measure metals separated after the incineration of packaging waste; and

7.

Verify compliance with specific requirements established in the rules for calculating the recycling targets for packaging waste.

1.

Member State:

2.

Organisation submitting the data and the description:

3.

Contact person / contact details:

4.

Reference year:

5.

Delivery date / version:

6.

Link to data publication by the Member State (if any):

Add rows as appropriate.

Name of institution | Description of key responsibilities

…

…

…

…

…

…

Add rows for each survey used.

Scope of the survey | Year | Statistical units | Percentage of population surveyed |

Data

(t)

Confidence level | Error margin | Adjustments from the survey year to the current year | Other details

Significant methodological changes in the calculation method for the current reference year, if any (please include in particular retrospective revisions, their nature and whether a break-flag is required for a certain year).

…

…

Add rows as appropriate.

Name of institution | Description of key responsibilities

…

…

Add rows after each material as appropriate.

Packaging material | Category of packaging covered (sales, grouped or transport packaging) | Type of packaging (for example bottles, crates, containers) | Description of the reuse system (open-loop or close-loop system) | Detailed description of the methods to collect and aggregate the data, including sources of information, coverage, and any estimates used if possible separately for each combination of packaging material, category, type of packaging and reuse system

Plastic | | | |

Wood | | | |

Ferrous metals | | | |

Aluminium | | | |

Glass | | | |

Paper and cardboard | | | |

Other | | | |

Packaging material | Detailed description of methods for verification of data on reusable packaging if possible separately for each combination of packaging material, category, type of packaging and reuse system

Plastic |

Wood |

Ferrous metals |

Aluminium |

Glass |

Paper and cardboard |

Other |

…

…

…

…

Add rows for each survey used.

Packaging material | Year | Statistical units | Percentage of population surveyed | Data (tonnes) | Confidence level | Error margin | Details of adjustments from the survey year to the current year | Other details

Significant methodological changes in the calculation method for the current reference year, if any (please include in particular retrospective revisions, their nature and whether a break-flag is required for a certain year)

…

…

Add rows as appropriate.

Name of institution | Description of key responsibilities

Packaging waste material/Data collection methods | Total | Plastic | Wood | Ferrous metals | Aluminium | Glass | Paper and cardboard | Other

Use of data on packaging placed on the market | | | | | | | |

Administrative reporting | | | | | | | |

Surveys | | | | | | | |

Electronic registry | | | | | | | |

Waste analysis | | | | | | | |

Data from waste operators | | | | | | | |

Data from municipalities | | | | | | | |

Data from extended producer responsibility schemes | | | | | | | |

Production and Foreign Trade Statistics | | | | | | | |

Other (specify) | | | | | | | |

Description of the verification methods concerning data on packaging waste generated in case data on packaging placed on the market is used

…

…

…

…

Packaging waste material/Validation | Total | Plastic | Wood | Ferrous metals | Aluminium | Glass | Paper and cardboard | Other

General estimates (e.g. based on surveys) | | | | | | | |

Free-riders | | | | | | | |

Private shipments | | | | | | | |

On-line sales | | | | | | | |

Others | | | | | | | |

…

…

…

…

Packaging waste material |

Cross-check

(yes/no)

Time-series check

(yes/no)

Audit

(yes/no)

Verification Process

Plastic | | | |

Wood | | | |

Ferrous metals | | | |

Aluminium | | | |

Glass | | | |

Paper and cardboard | | | |

Other | | | |

Additional details as regards the verification of data on packaging waste generated

…

…

Information on the classification used for treatment operations (if a standard classification is used such as the disposal operation or recovery operation codes established in Annexes I and II of Directive 2008/98/EC refer to its name or specify and describe all the relevant categories used).

…

…

Packaging waste material/Data collection methods | Total | Plastic | Wood | Ferrous metals | Aluminium | Glass | Paper and cardboard | Other

Administrative reporting | | | | | | | |

Surveys | | | | | | | |

Electronic registry | | | | | | | |

Waste analysis | | | | | | | |

Data from waste operators | | | | | | | |

Data from municipalities | | | | | | | |

Data from extended producer responsibility schemes | | | | | | | |

Other (specify) | | | | | | | |

Additional information about the methods, including the combination of methods used

…

…

Packaging waste material | Description of measurement points used (at calculation point or at the output of sorting operation with subtraction of non-target materials as appropriate, end-of-waste criteria, etc.), including variation at regional and local level

Plastic |

Wood |

Ferrous metals |

Aluminium |

Glass |

Paper and cardboard |

Other |

Detailed description of the methodology to calculate the amount of non-target materials removed between the measurement and the calculation points, where applicable

…

…

…

…

Description of the sorted packaging waste to which ALRs are applied, types of sorting plants to which different ALRs apply, the methodological approach to calculating ALRs at such point(s), including the statistical accuracy of any surveys used, or the nature of any technical specifications.

Add rows as appropriate.

Sorted waste material and sorting plant type | ALR applied (in %) | Description

Description, where applicable, of the methodology to exclude non-packaging waste from the reported amount of recycled packaging waste and of the methodology to correct the amount of packaging waste at the measurement point in order to reflect the natural humidity rate of packaging (including by using relevant European standards). Aggregated data across facilities of a similar type is acceptable.

Add rows as appropriate.

Packaging waste material | Facility type | Share of packaging waste (%) | Description of the methodologies applied to obtain the percentage

Description of the methodology to exclude waste originating from other countries, where applicable. Aggregated data across facilities of a similar type is acceptable.

Add rows as appropriate.

Packaging waste material | Facility type | Share of waste from the Member State (%) | Description of the methodologies applied to obtain the percentage

Description of treatment of waste reported under the category of other recovery and the share of waste (%) subject to such treatment

…

…

…

…

Packaging waste material |

Cross-check

(yes/no)

Time-series check

(yes/no)

Audit

(yes/no)

Verification Process

Plastic | | | |

Wood | | | |

Ferrous metals | | | |

Aluminium | | | |

Mixed waste | | | |

Other | | | |

Detailed description of the method to collect data in order to calculate the amount of metals separated from incineration bottom ash in accordance with the Commission Implementing Act adopted in accordance with Article 37(7) of Directive 2008/98/EC

Data | Description of the measurement method to obtain the data

Total amount of metal concentrate extracted from incinerator bottom ash |

Average level of metallic content in the total amount of metal concentrate, including the reliability of any surveys undertaken |

Proportion of waste entering incineration plants that is packaging waste, including the reliability of any surveys undertaken |

…

…

…

…

Add rows for each survey used.

Component of packaging waste | Year | Statistical units | Percentage of population surveyed | Data (tonnes) | Confidence level | Error margin | Details of adjustments from the survey year to the current year | Other details

Significant methodological changes in the calculation method for the current reference year, if any (please include in particular retrospective revisions, their nature and whether a break-flag is required for a certain year)

…

…

Add rows as appropriate.

Material | Variation (%) | Main reason for variation

…

…

Packaging waste material |

Subject to final treatment in the Member State

(yes/no)

Shipped to another EU Member State

(yes/no)

Exported outside the EU

(yes/no)

Description of specific measures for quality control and traceability of packaging waste, in particularly as regards monitoring and validation of data

Plastic | | | |

Wood | | | |

Ferrous metals | | | |

Aluminium | | | |

Glass | | | |

Paper and cardboard | | | |

Other | | | |

…

…

Justification to withhold the publication of specific parts of this report:

…

…

…

…