ANNEX III, Decision_act (EU) 2005/270

In forcesince 26 Apr 2019cited 1×
1.

The following terms shall apply in relation to the formulas set out in this annex:

mtotal IBA Fe/Altotal mass of ferrous metals or aluminium in incineration bottom ash in a given year;

mIBA Fe/nFe concentratesmass of ferrous metal concentrate or non-ferrous metal concentrate separated from raw waste incineration bottom ash in a given year;

cIBA Fe/Alconcentration of ferrous metals or aluminium in the respective metal concentrate;

mIBA Fe/Almass of ferrous metals or aluminium in the ferrous metal concentrate or in the non-ferrous metal concentrate separated from incineration bottom ash in a given year;

mnon-metallicmass of non-metallic material contained in specific ferrous metals concentrate or aluminium concentrate;

rAlshare of aluminium in non-ferrous metals contained in non-ferrous concentrate separated form incineration bottom ash;

mPW Fe/Almass of ferrous metals or aluminium from packaging waste entering an incineration operation in a given year;

mW Fe/Almass of all ferrous metals or aluminium entering an incineration operation in a given year; and

mPW IBA Fe/Almass of recycled ferrous metals or aluminium originating from packaging waste in a given year.

2.

Following the separation of ferrous /non-ferrous concentrate from raw incineration bottom ash, the ferrous metals/aluminium content of the metal concentrate shall be calculated by applying the following formula:

mtotal IBA Fe/Al = mIBA Fe/nFe concentrates · cIBA Fe/Al

3.

Data on the mass of ferrous /non-ferrous metal concentrates shall be obtained from facilities that separate metal concentrates from raw incineration bottom ash.

4.

The concentration of ferrous metals and aluminium resulting from the processing of raw incineration bottom ash shall be calculated by using data collected by regular surveys from facilities that treat metal concentrates and from facilities that use metals seprated from incineration bottom ash to producing metal products by applying the following formulas:

(a)

for ferrous metals

cIBA Fe

mIBA Fe

mIBA Fe concentrates

mIBA Fe concentratesmnon-metallic

mIBA Fe concentrates

, and

(b)

for aluminium

cIBA Al

mIBA Al

mIBA nFe concentrates

mIBA nFe concentratesmnon-metallicrAl

mIBA nFe concentrates

5.

The mass of recycled ferrous metals/aluminium originating from packaging waste in all recycled ferrous metals/aluminium separated from incineration bottom ash shall be determined through sampling surveys of the waste that enters the incineration operation. These surveys shall be carried out at least every five years and when there are reasons to expect that the composition of the incinerated waste has significantly changed. The mass of ferrous metals/aluminium originating from packaging waste shall be calculated by applying the following formula:

mPW IBA FeAl

mPW FeAl

mW FeAl

mtotal IBA FeAl.