, Communication from the Commission relating to the characteristics of products to be supp…

In force
–

oleic acid: maximum 35 % of total fatty acids present,

–

linoleic acid: 50-62 % of total fatty acids present.

5.

Soya oil

Refined soya oil meeting the following requirements:

–

appearance at ambient temperature: clear and shining,

–

water and volatile matter: maximum 0,2 % m/m,

–

insoluble impurities: maximum 0,05 % m/m,

–

free fatty acids: maximum 0,1 %, expressed as oleic acid,

–

colour, Lovibond 51/4,'' (red/yellow): maximum 1,5/15,

–

soap: maximum 0,005 % m/m,

–

no foreign odours or flavours,

–

peroxide number: maximum 10 milliequivalents of active oxygen per kg of oil (maximum 2 milliequivalents in case of supply ex-works or free at port of shipment),

–

specific weight at 20 °C: 0,919-0,925 g/cm3,

–

refractive index at 40 °C: 1,466-1,470,

–

iodine number (Wijs): 125-140 g/100 g.

E. MILK PRODUCTS

Preliminary comments

The milk powders must be manufactured after the award of the supply contract.

They must be processed from pasteurised milk from animals in good health, under excellent sanitary conditions which are supervised by qualified technical personnel. The area of production of the raw milk must in the 12 months preceding manufacture have been free of foot-and-mouth disease, bovine spongiform encephalopathy (BSE) and any other infectious disease which is compulsorily notifiable. On delivery, the supplier shall provide the beneficiary or his representative with a veterinary and/or health certificate from an official entity confirming that these requirements have been met.

The reference methods for analysis and quality evaluation of milk and milk products are those listed in the Annex to Regulation (EC) No 1854/96 (OJ L 246, 27.9.1996, p. 5).

1.

Skimmed-milk powder

Skimmed-milk powder obtained by the spray method and meeting the following minimum requirements:

–

protein: minimum 31,4 % of non-fat dry matter,

–

fat: maximum 1 %,

–

moisture: maximum 4 %,

–

titratable acidity in ml of decinormal sodium hydroxide solution: maximum 19,5,

–

lactates: maximum 150 mg/100 g,

–

additives: none,

–

phosphatase test: negative, i.e. maximum 4 μg of phenol/g of reconstituted milk,

–

insolubility index: maximum 0,5 ml (at 24 °C),

–

burnt particles: maximum 15 mg, i.e. at least disc B,

–

micro-organisms: maximum 40000/g,

–

coliform test: negative in 0,1 g, in accordance with Regulation (EC) No 1080/96 (OJ L 142, 15.6.1996, p. 13),

–

buttermilk test: negative,

–

whey test: negative,

–

taste and smell: clean,

  • celex=31966R0136
  • celex=31991R2568
  • celex=31996R1080
  • celex=31996R1854