Recital 29, Decision_act (EU) 1995/421

In forcesince 21 Dec 1994

The market for cold-rolled stainless steel flat products is not to be divided into two separate markets for austenitic steel and ferritic steel. These two kinds of stainless steel differ in their chemical composition, which gives them different properties. Austenitic steel is more expensive than ferritic steel, owing mainly to the addition of nickel. However, since both types of steel can be produced by the same plant, which in the space of one or two weeks can switch from one type to the other, it can be concluded that there is supply-side substitutability; hence both types are to be considered included in the same relevant product market.

PRODUCTION OF ELECTRICAL SHEET (30) Electrical sheet is characterized by specific electromagnetic properties (conductivity and electrical resistance). It is used mainly for the construction of large transformers, electric motors, power supply and switching units, and power plant generators. It can be regarded as a separate product market.

Electrical sheet being a type of cold-rolled sheet, the ECSC Treaty differentiates between strips less than 500 mm wide and strips over 500 mm wide. However, there is a high degree of supply-side substitution between both kinds. As already stated for stainless steel flat products, mills can roll widths of below 500 mm (EC product) and above (ECSC product), and material of less than 500 mm can be slit from wider coils.