1.DEFINITIONS
For the purposes of this Directive:
1.1.Type of vehicle
means vehicles which do not differ essentially as regards the following parts:
1.1.1.the shape or materials of the bodywork (particularly the engine compartment and its soundproofing);
1.1.2.the length and width of the vehicle;
1.1.3.the type of engine (positive or compression ignition, two- or four-stroke, reciprocating or rotary piston, number and capacity of cylinders, number and type of carburettors or injection systems, arrangement of valves, rated maximum power and corresponding engine speed(s));
1.1.4.the transmission system, the gear ratio in which the test is performed and the relevant overall ratio(s);
1.1.5.the number, type and arrangement of the exhaust systems;
1.1.6.the number, type and arrangement of the intake systems.
1.1.7.Notwithstanding the provisions of items 1.1.2 and 1.1.4, vehicles other than those in categories M1 and N1 (1) having the same type of engine and/or different overall gear ratios, may be regarded as vehicles of the same type.
However, if the above differences provide for a different test method, these differences are to be considered as a change of type.
1.2.Exhaust and intake systems
1.2.1.Exhaust systems
means a complete set of parts necessary to reduce the noise produced by the vehicle's engine exhaust.
1.2.2.Intake systems
means a complete set of parts necessary to reduce the noise produced by the vehicle's engine intake.
1.2.3.For the purposes of this Directive, these systems do not include the manifolds.
1.3.Different types of exhaust or intake system
means systems characterized by fundamental differences, such as the following:
1.3.1.systems in which the components bea different trade marks or trade names;
1.3.2.systems in which the characteristics of the materials of a component differ, or in which the components are of different shape or size; a change in the plating procedure (galvanization, aluminium coating, etc.) is not deemed to produce a difference of type;
1.3.3.systems in which the operating principles of at least one component differ;
1.3.4.systems in which the components are combined differently.
1.4.Component of an exhaust or an intake system
means one of the separate components which together form the exhaust system (e.g. exhaust pipes, the silencer proper) or the intake system (e.g. air filter).
1.5.Overall gear ratio
means the number of turns made by the engine per each turn of the driving wheels.
2.APPLICATION FOR EEC TYPE-APPROVAL
2.1.The application for EEC type-approval in respect of the sound level of a type of motor vehicle must be submitted by the manufacturer of the vehicle or his authorized representative.
2.2.It must be accompanied by the undermentioned documents in triplicate and the following information:
2.2.1.a description of the type of vehicle with reference to the points mentioned in item 1.1. The numbers and/or symbols identifying the engine type and vehicle type must be indicated;
2.2.2.a list, with appropriate identification, of the component parts of the exhaust and intake systems;
2.2.3.a drawing of the entire exhaust system with an indication of its position on the vehicle;
2.2.4.a detailed drawing of each component so that it can be easily located and identified, and an indication of the materials used.
2.3.A vehicle representative of the type in respect of which type-approval is sought must be submitted to the technical service responsible for the tests by the vehicle manufacturer or his authorized representative.
2.3.1.In the case of item 1.1.7 the single vehicle, representative of the type in question , will be selected by the technical service conducting approval tests, in accordance with the vehicle manufacturer, as that with the lowest mass in running order with the shortest length and following the specification laid down in item 5.2.2.4.3.3.1.2.
2.4.At the request of the technical service, a specimen of the exhaust system and an engine of at least the same cylinder capacity and rated maximum power as that fitted to the vehicle in respect of which type-approval is sought must also be submitted.
2.5.Before granting type-approval the competent authority must verify the existence of satisfactory arrangements for ensuring effective control of the conformity of production.
3.MARKINGS
3.1.The exhaust and intake system components, excluding fixing hardware and pipes, must bear:
3.1.1.the trade mark or name of the manufacturer of the systems and their components;
3.1.2.the manufacturer's trade description.
3.2.These markings must be clearly legible and indelible, even when the system is fitted to the vehicle.
4.EEC TYPE-APPROVAL
4.1.If an application within the meaning of 2.1 is approved, the competent authority will draw up a certificate, corresponding to the type which appears in Annex III, to be attached to the EEC type-approval certificate for the vehicle.
5.SPECIFICATIONS
5.1.General specifications
5.1.1.The vehicle, its engine and exhaust and intake systems must be designed, constructed and mounted such that, under normal conditions of use and notwithstanding the vibrations to which they may be subject, the vehicle satisfies the requirements of this Directive.
5.1.2.The systems must be designed, constructed and mounted so that reasonable resistance to the corrosion phenomena to which they are exposed is obtained having regard to the conditions of use of the vehicle.
5.2.Specifications relating to sound levels
5.2.1.Method of measurement
5.2.1.1.The sound emitted by the type of vehicle submitted for EEC type-approval must be measured in accordance with each of the two methods described in item 5.2.2.4 in the case of moving vehicles and item 5.2.3.4 in the case of stationary vehicles, respectively (2).
Vehicles having a maximum permissible mass exceeding 2 800 kg must be subjected to an additional measurement of the compressed air noise with the vehicle stationary in accordance with item 5.4, if corresponding brake equipment is part of the vehicle.
5.2.1.2.The values measured as specified in item 5.2.1.1 must be recorded in the test report and in a certificate corresponding to the model shown in Annex III. Details of the ambient conditions, namely, test track (type of surface), air temperature, wind (direction and speed) and ambient noise must also be recorded in the test report.
5.2.2.Sound level of moving vehicles
5.2.2.1.Limiting values
The sound level measured in accordance with items 5.2.2.2 to 5.2.2.5, inclusive, of this Annex shall not exceed the following limits:
Vehicle categories
Values expressed
in dB (A)
(decibels (A))
5.2.2.1.1.
Vehicles intended for the carriage of passengers, and comprising not more than nine seats including the driver's seat
74 5.2.2.1.2.
Vehicles intended for the carriage of passengers and equipped with more than nine seats, including the driver's seat; and having a maximum permissible mass of more than 3,5 tonnes and:
5.2.2.1.2.1.
with an engine power of less than 150 kW
78 5.2.2.1.2.2.
with an engine power of not less than 150 kW
80 5.2.2.1.3.
Vehicles intended for the carriage of passengers and equipped with more than nine seats including the driver's seat; vehicles intended for the carriage of goods:
5.2.2.1.3.1.
with a maximum permissible mass not exceeding 2 tonnes
76 5.2.2.1.3.2.
with a maximum permissible mass exceeding 2 tonnes but not exceeding 3,5 tonnes
77 5.2.2.1.4.
Vehicles intended for the carriage of goods and having a maximum permissible mass exceeding 3,5 tonnes:
5.2.2.1.4.1.
with an engine power of less than 75 kW
77 5.2.2.1.4.2.
with an engine power of not less than 75 kW but less than 150 kW
78 5.2.2.1.4.3.
with an engine power of not less than 150 kW
80 However:
for vehicles of categories 5.2.2.1.1 and 5.2.2.1.3, the limit values are increased by 1 dB (A) if they are equipped with a direct injection diesel engine,
-for vehicles with a maximum permissible mass of over two tonnes designed for off-road use, the limit values are increased by 1 dB (A) if their engine power is less than 150 kW and 2 dB (A) if their engine power is 150 kW or more,
-for vehicles in category 5.2.2.1.1., equipped with a manually operated gear box having more than four forward gears and with an engine developing a maximum power exceeding 140 kW/t and whose permissible maximum power/maximum mass ratio exceeds 75 kW/t, the limit values are increased by 1 dB (A) if the speed at which the rear of the vehicle passes the line BB& prime; (Figure 1) in third gear is greater than 61 km/h.
5.2.2.2.Measuring instruments
5.2.2.2.1.Acoustic measurements
The apparatus used for measuring the noise level must be a precision sound-level meter of the type described in Publication 179 'Precision sound level meters', second edition, of the International Electrotechnical Commission (IEC). Measurements must be carried out using the 'fast' response of the sound-level meter and the 'A' weighting curve which are also described in that publication.
At the beginning and end of each set of measurements, the sound-level meter must be calibrated according to the manufacturer's instructions by means of an appropriate sound source (e.g. a pistonphone). The test must be considered invalid if the sound-level meter errors registered during this calibration exceed 1 dB.
5.2.2.2.2.Speed measurements
The engine speed and vehicle speed on the test section shall be determined with an accuracy of 3 % or better.
5.2.2.3.Conditions of measurement
5.2.2.3.1.Test site
The test site must consist of a central acceleration section surrounded by a substantially flat test area. The test acceleration section must be level; the track surface must be dry and such that rolling noise remains low.
The test track must be such that the conditions of a free sound field between the sound source and the microphone are attained to within 1 dB. These conditions shall be deemed to be met if there are no large sound-reflecting objects such as fences, rocks, bridges or buildings within 50 m of the centre of the acceleration section. The test-track surface must comply with the specifications in Annex VI.
There must be no obstacle which could affect the sound field within the vicinity of the microphone and no persons shall stand between the microphone and the sound source. The observer carrying out the measurements must so position himself as not to affect the readings of the measuring instrument.
5.2.2.3.2.Meteorological conditions
Measurements must not be made in poor atmospheric conditions. It must be ensured that the results are not affected by gusts of wind.
5.2.2.3.3.Ambient noise
For measurements, the A-weighted sound level of sound sources other than those of the vehicle to be tested and of wind effects must be at least 10 dB (A) below the sound level produced by the vehicle. A suitable windscreen may be fitted to the microphone provided that account is taken of its effect on the sensitivity and directional characteristics of the microphone.
5.2.2.3.4.Condition of vehicle
For these measurements, the vehicle must be in running order as defined in item 2.6 of Annex I to Directive 70/156/EEC and, except in the case of vehicles which cannot be uncoupled, without trailer or semi-trailer.
The vehicle's tyres must be of the type normally fitted to such vehicles by the manufacturer and must be inflated to the appropriate pressure(s) for the unladen vehicle.
Before the measurements are made, the engine must be brought to its normal operating condition as regards temperatures, settings, fuel, spark plugs, carburettor(s), etc. (as appropriate). If the vehicle is fitted with fan(s) having an automatic actuating mechanism, this system must not be interfered with during the measurements.
Only the normal highway drive must be engaged in vehicles with more than two drive wheels.
5.2.2.4.Method of measurement
5.2.2.4.1.Nature and number of measurements
The maximum sound level expressed in A-weighted decibels (dB (A)) shall be measured as the vehicle is driven between lines AA& prime; and BB& prime; (Figure 1). The measurement shall be invalid if an abnormal discrepancy between the peak value and the general sound level is recorded.
At least two measurements must be taken on each side of the vehicle.
5.2.2.4.2.Positioning of the microphone
The microphone must be located at a distance of 7,5 ± 0,2 m from the reference line CC& prime; (Figure 1) of the track and 1,2 ± 0,1 m above the ground. Its axis of maximum sensitivity must be horizontal and perpendicular to the path of the vehicle (line CC& prime;).
5.2.2.4.3.Conditions of operation
5.2.2.4.3.1.General conditions
For all measurements, the vehicle must be driven in a straight line over the acceleration section in such a way that the median longitudinal plane of the vehicle is as close as possible to the line CC& prime;.
The vehicle must approach the line AA& prime; at a steady initial road speed as specified in items 5.2.2.4.3.2 and 5.2.2.4.3.3. When the front end of the vehicle has reached the line AA& prime;, the accelerator control is fully operated as rapidly as practicable and held in the fully opened position until the rear of the vehicle reaches the line BB& prime;; the accelerator control must be released as quickly as possible.
The trailers of articulated vehicles which cannot be uncoupled must not be taken into account as regards the crossing of line BB& prime;.
5.2.2.4.3.2.Approach speed
The vehicle must approach the line AA& prime; at a steady speed corresponding to the lower of the following two speeds:
-50 km/h,
-the speed corresponding to an engine speed equal to three-quarters of the speed, S, at which the engine develops its rated maximum power, in the case of vehicles of category M1 and in the case of vehicles of the other categories having an engine power not greater than 225 kW,
-the speed corresponding to an engine speed equal to half the speed, S, at which the engine develops its rated maximum power, in the case of vehicles not belonging to category M1 having an engine power greater than 225 kW.
However, if in the case of vehicles equipped with an automatic transmission having more than two discrete ratios there is a change-down to first gear during the test, the manufacturer may select either of the following test procedures:
-the speed, V, of the vehicle is increased to a maximum of 60 km/h in order to avoid such a change-down,
or
-the speed, V, must remain at 50 km/h and the fuel supply to the engine limited to 95 % of the supply necessary for full load. This condition is considered to be satisfied:
in the case of a spark-ignition engine, when the angle of the throttle opening is 90 %,
and
-in the case of a compression-ignition engine, when the movement of the central rack of the injection pump is limited to 90 % of its travel.
If the vehicle is equipped with an automatic transmission which has no manual override, it must be tested at different approach speeds, namely 30, 40, and 50 km/h, or at three-quarters of maximum road speed if this value is lower. The test result is that obtained at the speed which produces the maximum sound level.
5.2.2.4.3.3.Choice of gear ratios (in vehicles fitted with gearboxes)
5.2.2.4.3.3.1.Manually-operated, non-automatic gearbox
5.2.2.4.3.3.1.1.Vehicles in categories M1 and N1 equipped with a manually operated gearbox having not more than four forward gear ratios must be tested in second gear.
Vehicles in these categories equipped with a manually operated gearbox having more than four forward gear ratios must be tested in second and third gears successively. Only overall gear ratios intended for normal road use are considered. The arithmetic mean of the sound levels recorded for each of these two conditions shall be calculated.
If during the test in second gear, the engine speed exceeds the engine speed, S, at which the engine develops its rated maximum power, the test must be repeated with an approach speed and/or approach engine speed reduced by steps of 5 % of S until the engine speed attained no longer exceeds S.
However, the vehicles in category M1 having more than four forward gears and equipped with an engine developing a maximum power greater than 140 kW, and whose permissible maximum-power/maximum-mass ratio exceeds 75 kW/t, may be tested in third gear only, provided that the speed at which the rear of the vehicle passes the line BB' in third gear is greater than 61 km/h.
5.2.2.4.3.3.1.2.Vehicles other than those in categories M1 and N1 in which the total number of forward gear ratios is x (including the ratios obtained by means of an auxiliary gearbox or a multiple-ratio drive axle) must be tested using, in turn, ratios equal to or higher than x/n (3) (4).
The test result will be that obtained from the ratio producing the maximum sound level.
Shifting up gears from x/n must be terminated in the gear X where the engine speed, S, at which the engine develops its rated maximum power is for the last time reached when passing the line BB& prime;.
In the case of vehicles having different overall gear ratios (including a different number of gears) the representativity of the type by the test vehicle is determined as follows:
-if the highest sound level is obtained between the ratios x/n and X the vehicle selected is deemed representative of its type,
-if the highest sound level is obtained at ratio x/n the vehicle selected is deemed representative of its type only for those vehicles which have a lower overall gear ratio at x/n,
-if the highest sound level is obtained at ratio X the vehicle selected is deemed representative of its type only for those vehicles which have a higher overall gear ratio at X.
5.2.2.4.3.3.2.Automatic transmission equipped with manual override
The test is conducted with the selector in a position recommended by the manufacturer for 'normal' driving. External downshifts (e.g. kickdown) shall be put out of operation.
5.2.2.5.Interpretation of results
5.2.2.5.1.To take account of inaccuracies in the measuring instruments, the result obtained from each measurement is determined by deducting 1 dB (A) from the meter reading.
5.2.2.5.2.The measurements are considered valid if the difference between two consecutive measurements on the same side of the vehicle does not exceed 2 dB (A).
5.2.2.5.3.The highest sound level measured shall constitute the test result. Should the result exceed the maximum permissible sound level for the category of vehicle tested by 1 dB (A), two further measurements shall be made at the corresponding microphone position. Three of the four measurements thus obtained at that microphone position must fall within the prescribed limits.
5.2.3.Sound level of the stationary vehicle
5.2.3.1.Sound level in the vicinity of vehicles
In order to facilitate subsequent checks on vehicles in use, the sound level must be measured close to the exhaust system outlet in accordance with the following requirements and the measurement results entered in the test report drawn up for the purpose of issuing the certificate referred to in Annex III.
5.2.3.2.Measuring instruments
5.2.3.2.1.Acoustic measurements
A precision sound-level meter as defined in item 5.2.2.2.1 must be used for the measurements.
5.2.3.2.2.Measurement of engine speed
The engine speed is determined by means of a tachometer having an accuracy of 3 % or better. The tachometer may not be the one fitted to the vehicle.
5.2.3.3.Conditions of measurement
5.2.3.3.1.Test site (Figure 2)
Any area not subject to significant acoustic disturbance may be used as a test site. Flat surfaces which are covered in concrete, asphalt or any other hard surfacing and possess a high degree of reflectivity are particularly suitable; surfaces consisting of earth which has been tamped down must not be used.
The test site must be in the form of a rectangle, the sides of which are at least 3 m from the sides of the vehicle. This rectangle must not contain any significant obstacles, e.g. an individual other than the observer and the driver. The vehicle must be positioned within the abovementioned rectangle so that the microphone is at least 1 m from any kerbstone.
5.2.3.3.2.Meteorological conditions
Measurements must not be made in poor atmospheric conditions. It must be ensured that the results are not affected by gusts of wind.
5.2.3.3.3.Ambient noise
Readings on the measuring instruments produced by ambient noise and wind must be at least 10 dB (A) below the sound level to be measured. A suitable windscreen may be fitted to the microphone provided that account is taken of its effect on the sensitivity of the microphone.
5.2.3.3.4.Condition of the vehicle
The vehicle engine must be brought to normal running temperature before measurements commence. If the vehicle is fitted with fan(s) having an automatic actuating mechanism, this system must not be interfered with during the sound-level measurements.
During measurements, the gear lever must be in the neutral position.
5.2.3.4.Method of measurement
5.2.3.4.1.Nature and number of measurements
The maximum sound level expressed in A-weighted decibels (dB (A)) must be measured during the operating period referred to in item 5.2.3.4.3.
At least three measurements must be taken at each measuring point.
5.2.3.4.2.Position of the microphone (Figure 2)
The microphone must be located level with the exhaust outlet or 0,2 m above the test-track surface, whichever is the higher. The microphone diaphragm must face the exhaust outlet at a distance of 0,5 m from the latter. The axis of maximum sensitivity of the microphone must be parallel to the track surface at an angle of 45° ± 10° to the vertical plane defined by the direction in which the exhaust gases are emitted.
The microphone must be positioned to the side of this vertical plane which gives the greatest possible distance between the microphone and the vehicle contour.
If the exhaust system has several outlets, the centres of which are not more than 0,3 m apart, and which are connected to the same silencer, the microphone must face the outlet closest to the vehicle contour or the outlet which is the highest above the track surface. In all other cases separate measurements must be taken at each of them, the highest figure recorded being taken as the test value.
In the case of vehicles fitted with a vertical exhaust outlet (e.g. commercial vehicles), the microphone must be positioned at the level of the exhaust outlet, facing upwards with its axis vertical. It must be positioned at a distance of 0,5 m from the side of the vehicle closest to the exhaust outlet.