The Commission hereby fixes for the following products:
hot-rolled wide strip (coils),
hot-rolled narrow strip,
narrow strip obtained by slitting hot-rolled wide strip,
hot-rolled sheet obtained by cutting hot-rolled wide strip,
reversing mill plate,
cold-rolled sheet,
heavy sections and beams,
minimum prices equivalent to the guidance prices published for each of these products in the Commission communication of 29 April 1983 ( 1 ), less a maximum temporary rebate of:
18 ECU per tonne in the case of hot-rolled wide strip (coils),
4 ECU per tonne in the case of hot-rolled narrow strip,
13 ECU per tonne in the case of narrow strip obtained by slitting hot-rolled wide strip,
13 ECU per tonne in the case of hot-rolled sheet obtained by cutting hot-rolled wide strip,
30 ECU per tonne in the case of reversing mill plate,
0 ECU per tonne in the case of cold-rolled sheet,
17 ECU per tonne in the case of sections and beams in category 1,
4 ECU per tonne in the case of sections and beams in category 2a,
24 ECU per tonne in the case of sections and beams in category 2b,
29 ECU per tonne in the case of sections and beams in category 2c,
35 ECU per tonne in the case of sections and beams in category 3.
The sections and beams in categories 1, 2a, 2b, 2c and 3 are as defined in the Annex to the Commission communication of 29 December 1982 ( 2 ) on guidance prices.
As regards sections and beams whose dimensions correspond to the specifications of British Standard No 4 or to a similar dimensional standard, the minimum prices shall be equivalent to the prices published in the British Steel Corporation price list No 5, applicable from 31 March 1985, reduced by £ 15 per tonne.
The minimum prices resulting from the provisions of paragraph 1 shall be converted into national currencies using the following exchange rates, which correspond to the average value of the ECU in the three-month period December 1984, January and February 1985:
Bfrs/Lfrs | 44,68
DM | 2,22729
Fl | 2,51721
£ | 0,614785
Dkr | 7,97047
FF | 6,81576
Lit | 1 487,60
£ Irl | 0,714939
Dr | 90,9366
The products referred to in paragraph 1 (a) to (g) are those defined from the point of view of shape and dimensions in Euronorm 79-82, in the case of basis steels and quality steels in accordance with Euronorm 20-74, and in the case of special fine-grain weldable structural non-alloy and alloy steels known as ‘Sonderbaustähle’, including substandard products and seconds subject to the conditions indicated in Article 5.
These minimum prices shall apply to undertakings in the steel industry of the European Coal and Steel Community and their selling agencies and intermediaries as referred to in Decisions Nos 30-53 ( 3 ) and 31-53 ( 4 ).
In order to maintain a uniform level of minimum prices within the common market, the Commission shall adjust the minimum prices in accordance with official variations in exchange rates.