…
The TSE (Wales) Regulations 2002 (revoked), 67
Rendering of specified risk material
Changed on 27 May 2002
(1) The operator of a licensed rendering plant must ensure that specified risk material is processed without undue delay and in any event within seven days of delivery using one of the methods described in Part II of Schedule 6 to these Regulations.
(2) No person may move from the unclean section of a licensed rendering plant, as so specified by the occupier in accordance with paragraph 3 of Part I of Schedule 6 to these Regulations, into the clean section as so specified without first changing his working clothes and footwear and disinfecting the latter.
(3) The operator of an approved rendering plant must ensure (except as provided by paragraph (4) below) that any equipment used for processing specified risk material is used only for that purpose.
(4) Subject to paragraph (5) below, the National Assembly may, on application by the operator of a licensed rendering plant, consent to the use for other purposes of equipment previously used for processing specified risk material.
(5) No consent given under paragraph (4) above shall be effective until the National Assembly has indicated in writing that it is satisfied that the equipment concerned has been cleaned in accordance with any conditions specified in that consent.
(6) No person may take equipment or utensils from the unclean section of a licensed rendering plant into the clean section of a licensed rendering plant unless the equipment or utensils are first washed and disinfected.
(7) The occupier of a licensed rendering plant must ensure that systematic measures are taken to control birds, rodents, insects and other vermin on the premises.
(8) The occupier of a licensed rendering plant must ensure that the premises and equipment on the premises are kept in a good state of repair and that measuring equipment is regularly calibrated.…
- 27 May 2002 – todayin force
- 24 May 2002 – 27 May 2002earlier wording