The Traffic Signs Regulations and General Directions 2002, 55

Warning lights

In forcesince 30 Jan 2012
(1)

A lamp for indicating to traffic the limits of a temporary obstruction of the road (a “warning light”) shall comply with the requirements in paragraphs (2), (3), (4), (5) and (6).

(2)

The height of the centre of each lens of the warning light from the surface of the road in the immediate vicinity of the lamp shall not exceed 1500 millimetres where the speed limit on the road is 40 mph or less, or 1200 millimetres where the speed limit on the road is more than 40 mph.

(3)

The warning light—

(a)

shall be powered separately from any other object or device; and

(b)

shall show a steady or intermittent amber light.

(4)

Subject to paragraphs (5) and (6), the whole of the warning light shall conform—

(a)

to British Standard BS EN 12352:2006 incorporating corrigenda July 2008 and July 2009; or

(b)

to a corresponding EEA Standard.

(5)

In relation to each aspect of performance specified in column (2) of an item in the Table, the warning light shall comply with—

(a)

the requirement or test specification of British Standard BS EN 12352:2006 incorporating corrigenda July 2008 and July 2009 specified in column (3) of the item; or

(b)

an equivalent requirement or test specification specified in a corresponding EEA Standard.

Table

(1)

Item

(2)

Aspect of performance

(3)

Requirement or test specification and class

NOTE 1: A light flashing at a rate of 900 flashes per minute or more shall be deemed to comply with class F1.

NOTE 2: A light manufactured before 1st January 2011 and having a flash rate of not less than 75 nor more than 150 flashes per minute shall be deemed to comply with the requirements of item 6 until and including 31st December 2015.

1.

| Area, angle and luminous intensity | Class L1 or L3 in Table 1

2.

| Light emitting surface |

For class L1 lights: paragraph 4.1.2.1

For class L3 lights: class P1

3.

| Colorimetric performance of light emitted | Class C yellow 1 in Table 2

4.

| Retro-reflective device | Class R2

5.

| Automatic photosensitive switching | Class A1

6.

| Continuity of emitted light | Class F1 (steady) or class F2 (but see NOTE 1 and NOTE 2)

7.

| On-time (flashing lights) | Class O2

8.

| Mechanical strength | Class M4

(6)

The external surface of the parts of the warning light which are not the lenses and are visible to road users shall be of a colour having the colorimetric values—

(a)

of reference 355 Lemon, or reference 356 Golden yellow, in Table 1 (standard colours) of British Standard BS 381C : 1996; or

(b)

of an equivalent reference specified in a corresponding EEA Standard.

Changed on 30 Jan 2012

(1) A lamp showing a steady or intermittent amber light which— (a) conforms to— (i) British Standard Specification BS3143: Part 1: 1985 amended by Amendment No. 1 dated February 1985; (ii) BS3143: Part 2: 1990 amended by Amendment No. 1 dated November 1993 and Amendment No. 2 dated December 1998for indicating to traffic the limits of a temporary obstruction of the road (a “warning light”) shall comply with the requirements in paragraphs (2), (3), (4), (5) and (6). (2) The height of the centre of each lens of the warning light from the surface of the road in the immediate vicinity of the lamp shall not exceed 1500 millimetres where the speed limit on the road is 40 mph or less, or 1200 millimetres where the speed limit on the road is more than 40 mph. (3) The warning light— (a) shall be powered separately from any other object or device; and (b) shall show a steady or intermittent amber light. (4) Subject to paragraphs (5) and (6), the whole of the warning light shall conform— (a) to British Standard BS EN 12352:2006 incorporating corrigenda July 2008 and July 2009; or (iii) b) to a corresponding EEA Standard; and (b) is illuminated separately and by a single source of light, shall indicate to traffic the limits of a temporary obstruction of the road and in this regulation is called a “road danger lamp”. (2) The height of the centre of each lens of a road danger lamp from the surface of the road in the immediate vicinity of the lamp . (5) In relation to each aspect of performance specified in column (2) of an item in the Table, the warning light shall comply with— (a) the requirement or test specification of British Standard BS EN 12352:2006 incorporating corrigenda July 2008 and July 2009 specified in column (3) of the item; or (b) an equivalent requirement or test specification specified in a corresponding EEA Standard. Table (1) Item (2) Aspect of performance (3) Requirement or test specification and class NOTE 1: A light flashing at a rate of 900 flashes per minute or more shall be deemed to comply with class F1. NOTE 2: A light manufactured before 1st January 2011 and having a flash rate of not less than 75 nor more than 150 flashes per minute shall not exceed 1500 millimetres where the speed limit on the road is 40 mph or less, or 1200 millimetres where the speed limit on the road is more than 40 mph. (3) The rate of flashing of a road danger lamp which shows an intermittent be deemed to comply with the requirements of item 6 until and including 31st December 2015. 1. | Area, angle and luminous intensity | Class L1 or L3 in Table 1 2. | Light emitting surface | For class L1 lights: paragraph 4.1.2.1 For class L3 lights: class P1 3. | Colorimetric performance of light emitted | Class C yellow 1 in Table 2 4. | Retro-reflective device | Class R2 5. | Automatic photosensitive switching | Class A1 6. | Continuity of emitted light shall be— (a) if the lamp is placed not less than 50 metres from a street lamp lit by electricity on a road subject to a speed limit of 40 mph or less, either— (i) not less than 900 flashes per minute; or (ii) not less than 55 nor more than 150 flashes per minute; (b) in any other case not less than 900 flashes per minute| Class F1 (steady) or class F2 (but see NOTE 1 and NOTE 2) 7. | On-time (flashing lights) | Class O2 8. | Mechanical strength | Class M4 (6) The external surface of the parts of the warning light which are not the lenses and are visible to road users shall be of a colour having the colorimetric values— (a) of reference 355 Lemon, or reference 356 Golden yellow, in Table 1 (standard colours) of British Standard BS 381C : 1996; or (b) of an equivalent reference specified in a corresponding EEA Standard.

  1. 30 Jan 2012 – todayin force
  2. 16 Dec 2002 – 30 Jan 2012earlier wording