The Air Quality Standards (Scotland) Regulations 2010, 2

Definitions

In forcesince 1 Jun 2022cited 2×

In these Regulations—

“ambient air” means outdoor air in the troposphere, excluding workplaces as defined by Council Directive 89/654/EEC where provisions concerning health and safety at work apply and to which members of the public do not have regular access;

“AOT 40” (expressed in (μg/m3).hours) means the sum of the difference between hourly concentrations greater than 80 μg/m3 (= 40 parts per billion) and 80 μg/m3 over a given period using only the one-hour values measured between 0800 hours and 2000 hours Central European Time each day;

“arsenic”, “cadmium”, “nickel” and “benzo(a)pyrene” mean the total content of those elements and compounds within the PM10 fraction present in ambient air;

“Directive 2004/107/EC” means Directive 2004/107/EC of the European Parliament and of the Council relating to arsenic, cadmium, mercury, nickel and polycyclic aromatic hydrocarbons in ambient air (but see regulation 2A);

“Directive 2008/50/EC” means Directive 2008/50/EC of the European Parliament and of the Council on ambient air quality and cleaner air for Europe (but see regulation 2A);

“fixed measurements” means measurements taken at fixed locations, either continuously or by sampling from time to time, to determine levels of pollutants in accordance with the relevant data quality objectives;

“indicative measurements” means measurements which meet data quality objectives that are less strict than those required for fixed measurements;

“margin of tolerance” means the percentage of the limit value by which that value may be exceeded in a given year;

“oxides of nitrogen” means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (μg/m3);

“ozone precursor substances” means substances which contribute to the formation of ground level ozone;

“PM10” means particulate matter which passes through a size-selective inlet as defined in the reference method for the sampling and measurement of PM10, EN 12341: 1998 , with a 50 per cent efficiency cut-off at 10 μm aerodynamic diameter;

“PM2.5” means particulate matter which passes through a size-selective inlet as defined in the reference method for the sampling and measurement of PM2.5, EN 14907: 2005c, with a 50 per cent efficiency cut-off at 2.5μm aerodynamic diameter;

“particulate matter” means PM2.5 and PM10;

“pollutant” means any of the following:—

sulphur dioxide;

nitrogen dioxide;

oxides of nitrogen;

particulate matter;

lead;

benzene;

carbon monoxide;

arsenic;

cadmium;

mercury;

nickel;

benzo(a)pyrene or other polycyclic aromatic hydrocarbons;

ozone;

“polycyclic aromatic hydrocarbons” means those organic compounds composed of at least two fused aromatic rings made entirely from carbon and hydrogen; and

“total gaseous mercury” means elemental mercury vapour (Hg0) and reactive gaseous mercury, being water-soluble mercury species with sufficiently high vapour pressure to exist in the gas phase.