Annex IX … DECLARATION OF CONFORMITY No …, Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 o…

In forcesince 31 Dec 2020

1.

PPE (product, type, batch or serial number):

2.

Name and address of the manufacturer and, where applicable, his authorised representative:

3.

This declaration of conformity is issued under the sole responsibility of the manufacturer:

4.

Object of the declaration (identification of PPE allowing traceability; where necessary for the identification of the PPE, a colour image of sufficient clarity may be included):

5.

The object of the declaration described in point 4 is in conformity with the relevant statutory requirements: …

6.

References to the relevant designated standards used, including the date of the standard, or references to the other technical specifications, including the date of the specification, in relation to which conformity is declared:

7.

Where applicable, the approved body … (name, number) … performed the … type-examination (Module B) and issued the … type-examination certificate … (reference to that certificate).

8.

Where applicable, the PPE is subject to the conformity assessment procedure … (either conformity to type based on internal production control plus supervised product checks at random intervals (Module C2) or conformity to type based on quality assurance of the production process (Module D)) … under surveillance of the approved body … (name, number).

9.

Additional information:

Signed for and on behalf of: …

(place and date of issue):

(name, function) (signature):

Changed on 31 Dec 2020

The object of the declaration described in point 4 is in conformity with the relevant Union harmonisation legislationstatutory requirements: …

References to the relevant harmoniseddesignated standards used, including the date of the standard, or references to the other technical specifications, including the date of the specification, in relation to which conformity is declared:

Where applicable, the notifiedapproved body … (name, number) … performed the EU… type-examination (Module B) and issued the EU… type-examination certificate … (reference to that certificate).

Where applicable, the PPE is subject to the conformity assessment procedure … (either conformity to type based on internal production control plus supervised product checks at random intervals (Module C2) or conformity to type based on quality assurance of the production process (Module D)) … under surveillance of the notifiedapproved body … (name, number).

  1. 31 Dec 2020 – todayin force
  2. 9 Mar 2016 – 31 Dec 2020earlier wording