1. The general principles set out in Article 30 of Regulation (EC) No 765/2008 shall apply to the CE UK marking.
2. The CE marking shall must be affixed to those construction products for which the manufacturer has drawn up a declaration of performance in accordance with Articles 4 and 6.
The UK marking must be affixed only by the manufacturer or the manufacturer's authorised representative.
2. If a declaration of performance has not been drawn up by the manufacturer in accordance with Articles 4 and 6, the CEUK marking shallmust not be affixed.
3. By affixing or having affixed the CEUK marking, manufacturers indicate that they take responsibility for the conformity of the construction product with the declared performance as well as the compliance with all applicable requirements laid down in this Regulation and in other relevant Union harmonisation legislation enactments providing for its affixing.
4. The rules for affixing the CEUK marking provided for in other relevant Union harmonisation legislation shall enactments (including in Article 30 of RAMS) apply without prejudice to this paragraph.
3. For any construction product covered by a harmonised standard, or for which a European Technical Assessment has been issued, the CE marking shall be the only marking which attests conformity Article.
5. A public authority within the meaning of section 6 of the construction product with the declared performance in relation to the essential characteristics, covered by that harmonised standard or by the European Technical Assessment.
In this respect, Member States shall not introduce any references or shall withdraw any references in national measures to a marking attesting conformity with the declared performance in relation to the essential characteristics covered by a harmonised standard other than the CEHuman Rights Act 1998 may not impose rules or conditions impeding the use of a construction product bearing the UK marking.
4. A Member State shall not prohibit or impede, within its territory or under its responsibility, the making available on the market or the use of construction products bearing the , or the CE marking, when the declared performances correspond to the requirements for such use in that Member State.
5. A Member State shall ensure that the use of construction products bearing the (or CE marking shall not be impeded by rules or conditions imposed by public bodies or private bodies acting as a public undertaking, or acting as a public body on the basis of a monopoly position or under a public mandateaccompanied by the UK(NI) indication) where Article 16A(2)(a) applies, when the declared performances correspond to the requirements for such use in that Member State.
6. The methods used by the Member States in their requirements for construction works, as well as other national rules in relation to the essential characteristics of construction products, shall be in accordance with harmonised standards.Great Britain.