Communication concerning the:
EU type-approval (1),
extension of EU type-approval (1),
refusal of EU type-approval (1),
withdrawal of EU type-approval (1).
EU type-approval number: … Reason for extension: …
0.1. Make (trade name of manufacturer): …
0.2. Type: …
0.2.1. Commercial name(s) (if available): …
0.3. Means of identification of type if marked on the vehicle (2)
0.3.1. Location of that marking: …
0.4. Category of vehicle (3)
0.5. Name and address of manufacturer: …
0.8. Name(s) and address(es) of assembly plant(s): …
0.9. If applicable, name and address of manufacturer’s representative (5): …
Brake corner emission family identifier(s) as defined in paragraph 7 of UN Regulation No 179
Additional information (where applicable):
Technical service responsible for issuing the vehicle type compliance demonstration report: …
Date of vehicle type compliance demonstration report: …
Number of vehicle type compliance demonstration report: …
Remarks (if any):
Place: …
Date: …
Signature: …
Delete what is not applicable (there are cases where nothing needs to be deleted when more than one entry is applicable).
If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).
As defined in Article 4 of Regulation (EU) 2018/858.
As defined in Article 3(24) of Regulation (EU) 2018/858.
‘Manufacturer’s representative’ as defined in Article 3(41) of Regulation (EU) 2018/858