Art. 6 Regulation (EU) 2026/1392

Approval of basic material for the purpose of conservation of forest genetic resources

In forcesince 20 May 2026
1.

By way of derogation from Article 4(1), the competent authorities may authorise professional operators to approve basic material for the production of FRM for the purpose of conservation of forest genetic resources.

Those professional operators shall be subject to the requirements laid down in Article 10(1) and (2).

2.

In order to be granted an authorisation under paragraph 1, the professional operator shall:

(a)

possess the necessary knowledge to assess compliance with the requirements set out in Article 4(2) and in Annexes II to V;

(b)

be qualified or employ qualified personnel to ensure compliance with the requirements set out in Article 4(2) and Annexes II to V;

(c)

have the capability to assess the level of genetic diversity of the basic material concerned, monitor the critical points for the approval of basic material and keep records of the results of that monitoring.

3.

Professional operators authorised pursuant to paragraph 1 shall ensure that the basic material is approved with reference to a unit of approval in accordance with the requirements set out in Annexes II to V concerning the conservation of forest genetic resources. They shall communicate the details of that unit of approval to the competent authority.

The competent authority shall decide on the inclusion of the approved basic material in the national register pursuant to Article 15, following verification of compliance with the requirements set out in Article 4(2) and in Annexes II to V, for the purpose of conservation of forest genetic resources.

4.

Where the professional operator no longer fulfils the requirements of paragraph 1, second subparagraph, or of paragraph 2 of this Article, Article 12 shall apply to the withdrawal or modification of the authorisation referred to in paragraph 1 of this Article.

5.

The Commission may adopt implementing acts to establish the specific conditions for assessing the eligibility of professional operators to be authorised to approve basic material and the conditions for the communication of the details of the unit of approval to the competent authority.

Those implementing acts shall take account of the development of applicable international standards. They shall be adopted in accordance with the examination procedure referred to in Article 32(2).