Art. 18 Regulation (EU) 2026/1392

Master certificate

In forcesince 20 May 2026
1.

The master certificate of identity (‘master certificate’) shall attest that the FRM fulfils one of the following conditions:

(a)

it derives from a single unit of approved basic material in accordance with Article 4(2), seventh subparagraph;

(b)

it derives from a subsequent vegetative propagation in accordance with Article 19(2);

(c)

it derives from a mixture of seed lots or parts of plants lots in accordance with Article 19(3);

(d)

it is imported and its official certificate is replaced in accordance with Article 27(3), point (a).

2.

The competent authorities shall issue the master certificate for the FRM, bearing a unique code, upon application of a professional operator, as soon as possible after the harvesting of the FRM or the extraction of the seeds, depending on the circumstances and on the nature of the FRM, or after importing the FRM, and indicating the unique register reference of basic material.

3.

The Commission shall adopt implementing acts setting out the content of and the models for the master certificate, and in particular for:

(a)

the model master certificate for FRM that is derived from seed sources and stands;

(b)

the model master certificate for FRM that is derived from seed orchards or parents of a family; and

(c)

the model master certificate for FRM that is derived from clones and clonal mixtures.

Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 32(2).

4.

Where, in accordance with Article 19(2), a professional operator conducts subsequent vegetative propagation of FRM, that professional operator shall notify the competent authority thereof and a new master certificate shall be issued pursuant to paragraph 2 of this Article.

5.

Where mixing takes place in accordance with Article 19(3), Member States shall ensure that the register references of the components of the mixtures are identifiable, and a new master certificate shall be issued pursuant to paragraph 2 of this Article. The professional operator shall notify the competent authority of its intention to mix within a reasonable period prior to carrying it out. The competent authority may decide to supervise the mixing process.

6.

Where a lot referred to in Article 19(1) is subdivided into smaller lots that are not processed uniformly and subjected to subsequent vegetative propagation, a new master certificate shall be issued pursuant to paragraph 2 of this Article and a reference shall be made to the previous master certificate code.

7.

Upon request from the professional operator, the competent authorities shall issue a master certificate pursuant to paragraph 2 to replace a master certificate issued pursuant to Directive 1999/105/EC. In that case, the master certificate shall bear the statement: ‘The basic material complies with the requirements of Directive 1999/105/EC.’.

8.

A master certificate may be issued in an electronic form (‘electronic master certificate’).

The Commission may adopt implementing acts setting out technical arrangements for the issuance of electronic master certificates and for the use of electronic signatures, for ensuring the compliance of electronic master certificates with this Article and an appropriate, credible and effective mode for their issuance. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 32(2).

9.

The Commission is empowered to adopt delegated acts in accordance with Article 31 supplementing this Article by setting out rules on:

(a)

digital recording of the main actions concerning the verification of the requirements for the approval of the basic material which lead to the issuance of the master certificate;

(b)

the establishment of a centralised platform that connects all the Member States and the Commission to facilitate the processing of, access to, and use of master certificates.

10.

Each Member State shall establish and keep up to date a national list of issued master certificates and, upon request, make that list available to the Commission and the other Member States.

11.

The Commission may adopt implementing acts laying down rules concerning:

(a)

the procedures and technical arrangements to ensure the issuance of accurate and reliable master certificates, and prevent risk of fraud;

(b)

the procedures to be followed in the case of withdrawals of master certificates and for the issuance of replacement master certificates;

(c)

rules for the production of certified copies of master certificates.

Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 32(2).