1 ANNEX, Regulation (EU) 2026/699

In forcesince 23 Mar 2026

Annex X to Regulation (EU) 2018/858 is amended as follows:

(1)

point 1 is replaced by the following:

‘1. Introduction

This Annex lays down technical requirements for the access to vehicle OBD information and vehicle repair and maintenance information regardless of the vehicle powertrain type.’;

(2)

in point 2.1, the second sentence is replaced by the following:

‘Compliance with the obligation for manufacturer to provide information about the vehicle OBD system and vehicle repair and maintenance information on their websites through a standardised format shall be presumed by conforming to Part 1 “General information and use case definition”, Part 2 “Technical requirements”, Part 3 “Functional user interface requirements” and Part 4 “Conformance test” of standard EN ISO 18541 – 2021 and Part 5 “Heavy duty specific provision” “Road vehicles – Standardized access to automotive repair and maintenance information (RMI)” of standard EN ISO 18541 – 2018.’;

(3)

in point 2.5, the introductory wording is replaced by the following:

‘2.5. The vehicle repair and maintenance information shall include the following:’;

(4)

point 2.5.1 is replaced by the following:

‘2.5.1. an unequivocal identification of the vehicle and the resulting list of factory-fitted options, as well as of systems, components, separate technical units, parts or equipment for which the manufacturer is responsible;’;

(5)

point 2.5.4 is replaced by the following:

‘2.5.4. information about systems, components, separate technical units, parts, equipment and diagnosis (including minimum and maximum theoretical values for measurements), including information about functions and capabilities necessary for calibration and repair of Advanced Driver Assistance Systems (ADAS) or Driver Control Assistance Systems (DCAS) and related components);’;

(6)

point 2.5.7 is replaced by the following:

‘2.5.7. information required to determine whether a software update or variant coding is necessary for a specific repair and maintenance operation;’;

(7)

the following point 2.5.7a is inserted:

‘2.5.7a. information required for the identification of the correct software update or variant coding for each system, component, separate technical unit, part or equipment requiring a software update.

By way of exception from point 2.1, if the determination of the correct software version or variant coding requires a backend connection, the manufacturer shall not be required to publish the information required for the identification of the correct software update or variant coding for each system, component, separate technical unit, part or equipment requiring a software update on the website;’;

(8)

point 2.5.8 is amended as follows:

‘2.5.8. information provided concerning, and delivered by means of, proprietary tools and equipment including the information of any additional tooling, equipment and the user instructions, that are required to carry out a component or system calibration;’;

(9)

the following points 2.5.12 and 2.5.13 are added:

‘2.5.12. information provided by the manufacturer to his authorised partners, dealers and repairers or used by the manufacturer for repair and maintenance purposes, necessary for the diagnosis and, where applicable, the repair of traction battery systems as well as its exchangeable units including battery modules;

2.5.13. vehicle type specific information necessary for the safe handling of parts and components, in particular information necessary for the protection against electric, thermic and chemical hazards from traction batteries; as available to the vehicle manufacturer or its partners.’;

(10)

point 2.6.2 is replaced by the following:

‘2.6.2. the following information:

(a)

diagnostic description data referred to in point 3 of appendix 2. The manufacturer shall ensure that this data meets the following requirements:

(i)

it is made available as electronic directly processable datasets;

(ii)

it is of the same level of detail as used by the vehicle manufacturer proprietary diagnostic tools;

(iii)

it is comprehensively documented;

(b)

descriptions of necessary off- and onboard interactions needed for the completion of any repair and maintenance job.

The vehicle manufacturer shall make the information referred in point (a) available only for vehicle types for which the type-approval certificate was first granted after 1 September 2020;’;

(11)

the following point 2.6.3 is inserted:

‘2.6.3. information on how to acquire proprietary tools and equipment.’;

(12)

the following points 2.6a and 2.6b are inserted:

‘2.6a. The manufacturer shall make available to manufacturers of repair equipment and generic diagnostic tools all information, technical specification and user instructions for the repair, maintenance and diagnosis of ADAS/DCAS systems by diagnostic tools.

2.6b. The information referred to in points 2.6 and 2.6a shall be made available in accordance with the terms and conditions stipulated by the manufacturer in compliance with this Regulation, including payment terms and conditions or use limitations and fees required in accordance with Article 63(1).’;

(13)

point 2.9 is replaced by the following:

‘2.9. For the purpose of accessing vehicle OBD information, diagnostics, repair and maintenance, monitoring and inspection, vehicle manufacturer shall enable bi-directional access to the in-vehicle data stream, through all of the following means:

(a)

the serial data port on the standardised data link connector referred to in Appendix 1 paragraph 6.5.3 of Annex C5 to UN Regulation No 154 respectively in accordance with paragraph 4.7.3 of Annex 9B and the reference standard documents set out in Appendix 6 to that Annex to UN Regulation No 49;

(b)

any other in-vehicle means of access that is provided by the manufacturer to his authorised partners, dealers and repairers or is used by the manufacturer for repair and maintenance purposes, including Ethernet connectors, non-standardized pins on the standardized OBD port, application programming interfaces used for aftermarket service integration, and wireless local area networks;

(c)

any facility that is provided by the manufacturer to his authorized partners, dealers and repairers or is used by the manufacturer to enable remote access to vehicle OBD Information for repair and maintenance, including monitoring and inspection (where monitoring and inspection are performed for repair and maintenance) or remote repair and diagnostics services.

Where the vehicle is in motion, the manufacturer may choose to make the data stream available only for read-only functions, on condition that the manufacturer applies the same restriction to its own authorized partners, dealers and repairers.

The manufacturer may implement conditions for accessing the vehicle data stream, to the extent this is necessary and proportionate for compliance with Article 4(5)(d) and Annex II line D4 of Regulation (EU) 2019/2144 and Articles 4(7) 4(8) and Article 6(3) of Regulation (EU) 2024/1257. For access using the means described in 2.9 (a) and (b), such conditions shall not go beyond the conditions that the manufacturer is allowed to apply pursuant to Appendix 4 to this Annex.

[Regulation No 154 of the Economic Commission for Europe of the United Nations (UN/ECE) – Uniform provisions concerning the approval of light duty passenger and commercial vehicles with regards to criteria emissions, emissions of carbon dioxide and fuel consumption and/or the measurement of electric energy consumption and electric range (WLTP) [2021/2039] (OJ L 423, 26.11.2021, p. 1, ELI: http://data.europa.eu/eli/reg/2021/2039/oj).] [Regulation No 49 of the Economic Commission for Europe of the United Nations (UN/ECE) – Uniform provisions concerning the measures to be taken against the emission of gaseous and particulate pollutants from compression-ignition engines and positive ignition engines for use in vehicles [2023/64] (OJ L 14, 16.1.2023, p. 1, ELI: http://data.europa.eu/eli/reg/2023/64/oj).’;]

(14)

point 6.1 is replaced by the following:

‘6.1. Compliance with the obligation for manufacturer to provide vehicle repair and maintenance information on their websites through a standardised format shall be presumed by conforming with the Parts of standard ISO 18541-1:2021 to ISO 18541-4:2021 and ISO 18541-5:2018, as referred to in point 2.1.

Those requiring the right to duplicate or republish such information shall negotiate directly with the manufacturer concerned. Information for training material shall also be available, and it may be presented through other media than websites.

6.1.1. For the purpose of publishing repair and maintenance information, the manufacturer shall make the information available as files in the format which serves for direct electronic processing of the sets of data contained in those files. The information shall be of the same level of detail as is used by the manufacturer for repair and maintenance purposes. It shall be documented for the purposes of interpretation and updated at the frequency agreed with the independent operator Updates shall be available with the same frequency and timing as they are available to the authorised dealers and repairers. Information shall be offered in packages based on technical information by use case, as available to the manufacturer. The information referred to in the first sentence of this point shall be provided on the basis of terms and conditions stipulated by the manufacturer in compliance with this Regulation, such as payment terms and any compatible conditions or use limitations and the fees required in compliance with Article 63(1) of this Regulation. Information packages defined based on criteria reflecting the information requirements for Use Case 5.1.1., Use Case 5.1.2, Use Case 5.2, Use Case 5.3, Use Case 5.4, Use Case 5.5, Use Case 5.7, Use Case 5.8, Use Case 5.9, Use Case 8 and Use Case 11 of standard ISO 18541-1 2021 shall be presumed compliant.

The manufacturer shall only provide, as from 23 June 2027, information packages defined based on criteria reflecting the information requirements needed for Use Case 5.3 and Use Case 5.4 in ISO 18541-1:2021 that are only available per vehicle identification number (VIN) where an independent repairer requests so via an Application Programming Interface (API). In such cases, the independent repairer shall transmit a VIN-specific request to the manufacturer through a third party acting on the basis of an agreement with the manufacturer.

Where the information packages are defined based on criteria reflecting the information requirements for Use Case 8 in ISO 18541-1:2021, the manufacturer shall provide to such a third party, as from 23 June 2027, an API that allows the independent repairer to view and update the electronic maintenance history subject to the additional conditions as specified in the ISO and, where appropriate, manufacturer’s conditions and processes used to obtain customer agreement. The manufacturer shall do so subject to the same or equivalent processes and required information as those specified in the manufacturer’s repair and maintenance information website. In such cases the independent repairer, with the customer’s agreement, may transmit a repair or maintenance record update request to the manufacturer through a third party acting on the basis of an agreement with the manufacturer. A certificate compliant with Recommendation ITU-T X.509 of the International Telecommunication Union may be used to verify the identity the independent repairer.

Access to such APIs, including for updating electronic maintenance history entries shall be subject to Article 63(1).

The information shall be structured in a way so that it is later possible to search and filter the information contained in the package by model type classification criteria and other classification criteria used by the vehicle manufacturer own network.

6.1.2. Information on all parts of the vehicle, with which the vehicle, as identified by the VIN and any additional criteria such as wheelbase, engine output, trim level or options, is equipped by the vehicle manufacturer and that can be replaced by spare parts offered by the vehicle manufacturer to its authorised repairers or dealers or third parties by means of reference to original equipment (OE) parts number, shall be made available, in the form of machine readable and electronically processable datasets, in a database that is easily accessible to independent operators.

That database shall comprise the VIN, OE parts numbers, OE naming of the parts, validity attributes (valid-from and valid-to dates), fitting attributes and, where applicable, structuring characteristics.

The information in the database shall be updated regularly. If this information is available to authorised dealers, the updates shall include all modifications to individual vehicles after their production.

[As defined in Article 2 of Commission Implementing Regulation (EU) 2023/138 of 21 December 2022 laying down a list of specific high-value datasets and the arrangements for their publication and re-use (OJ L 19, 20.1.2023, p. 43, ELI: http://data.europa.eu/eli/reg_impl/2023/138/oj).’;]

(15)

point 6.2.2 is replaced by the following:

‘6.2.2. the standard https//ssl-tls (RFC5246) or any successor to this standard shall be used;’;

(16)

point 6.2.3 is replaced by the following:

‘6.2.3. security certificates in accordance with international standard ISO/IEC 9594-8:2020 shall be used for mutual authentication of independent operators and manufacturers;’;

(17)

point 6.4 is replaced by the following:

‘6.4. Reprogramming of control units, variant coding and activation of replacement parts shall be conducted using non-proprietary hardware, without any dependency on manufacturer hardware in accordance with any of the following:

(a)

international standard ISO 22900-2;

(b)

SAE J2534-1;

(c)

SAE J2534-2;

(d)

TMC RP1210B;

(e)

SOVD-Standard ISO/DIS 17978-1.

Where conducted using Ethernet, reprogramming of control units, variant coding and activation of replacement parts shall be conducted in accordance with either ISO22900-2 or J2534-2.

For the validation of the compatibility of the manufacturer-specific application and the vehicle communication interfaces (VCI), complying with international standard ISO 22900-2 or with SAE J2534-1 or SAE J2534-2 or TMC RP1210B, the manufacturer shall offer either a validation of independently developed VCIs or the information and loan of any special hardware, required for a VCI manufacturer to conduct such validation.

The manufacturer may charge reasonable and proportionate fees for such validation or information and hardware. Those fees shall not discourage use of such validation or information and hardware.’;

(18)

the following point 6.4a is inserted:

‘6.4a. As from 23 December 2026, the vehicle manufacturer shall make available to independent diagnostic tool manufacturer any of the following software or information for vehicle type for which the type-approval certificate was first granted after 1 September 2020:

(a)

software or webservice interfaces to independent diagnostic tool manufacturers for their integration, that enables variant coding, pairing to a vehicle an original replacement part (including software and hardware compatible (as defined by the vehicle manufacturer) remanufactured or re-used part) or a vehicle manufacturer authorized replacement part, as well as the reprogramming of control units with a vehicle’s original equipment software according to vehicle manufacturer’s instructions, or;

(b)

necessary information, processes and resources necessary to implement variant coding and reprogramming in independent diagnostic tool of the independent diagnostic tool manufacturer.

However, by way of derogation from the time limit specified in the first sentence of this point, the vehicle manufacturer shall make available the software or information referred in points (a) and (b) above as from the following dates:

(i)

23 June 2027, with regard to vehicles for which the type-approval was first granted after 1 September 2020 but before 6 July 2022;

(ii)

23 June 2028 for any operation involving or dependent on performing software updates.’;

(19)

the following point 6.4b. is inserted:

‘6.4b. Until the vehicle manufacturer makes available the software or information for vehicle type referred to in point 6.4a and for the period of two years following that date, the use of vehicle manufacturer’s diagnostic hardware and diagnostic software by remote service providers, as referred to in point 1.2 of Appendix 4, for the purposes of re-programming and variant coding or parts activation shall be subject to the same fees and payment conditions as those applicable to independent repairers, irrespective of whether the diagnostic tools are used remotely.

Furthermore, vehicle manufacturer shall share with any interested diagnostic tool manufacturers, as soon as they are available:

(a)

the information necessary for implementing the API between the relevant vehicle manufacturer’s and diagnostic tool manufacturers’ systems:

(i)

no later than 23 June 2027 for any operation involving or dependent on performing software updates; and

(ii)

for other operations, no later than 23 September 2026; or

(iii)

with regard to vehicles for which the type-approval was first granted before 6 July 2022, no later than 23 December 2026;

(b)

the information necessary for testing the update functionality and interaction for hardware, no later than 23 December 2027 for any operation involving or dependent on performing software updates.’;

(20)

the following point 6.4c is inserted:

‘6.4c. Decoupling of components, separate technical units, parts and equipment, except for those that have been originally designed not to be de-coupled, shall be done in accordance with the process set out in this point. It shall not be subject to any conditions other than those referred to in this point.

The manufacturer shall put in place a process for the de-coupling of components, separate technical units, parts and equipment. For the purpose of installation of a re-used component, separate technical unit, part or equipment, the vehicle manufacturer defined processes may include a requirement to provide the unique identifier (including, where relevant, a unit’s serial number) of this component, separate technical units, part or equipment concerned, and the VIN of the vehicle, as well as an a requirement to obtain an agreement from the owner or the lessee of the vehicle, where they are identifiable. Where an agreement is required, it may be provided asynchronously from the part deinstallation.

For the purpose of remanufacturing in an industrial process, whereby a worn or failed component, separate technical units, part or equipment is restored to its original specification, the VIN of the original vehicle will not be required for de-coupling from the original vehicle. In this case the unique identifier of the component and the agreement the owner or the lessee of the vehicle, where they are identifiable, may be required.

All independent operators, including remanufacturers and refurbishers, authenticated in accordance with the requirements specified in Appendix 4, shall have equal access to these processes.

For the purpose of authentication of such an operator, where the vehicle manufacturer decoupling process is to be completed on their off-board platforms, authentication credentials issued in accordance with point 9.2 of Appendix 4, or those used for access to the vehicle manufacturer RMI website shall be accepted.’;

(21)

points 7.2 and 7.3 are deleted;

(22)

point 7.4 is replaced by the following:

‘7.4. On the basis of a completed certificate on access to vehicle OBD information and vehicle repair and maintenance information, the approval authority may presume that the manufacturer has put in place satisfactory arrangements and procedures with regard to access to vehicle OBD information and vehicle repair and maintenance information, provided that no complaint has been made.’;

(23)

the following point 7.5 is added:

‘7.5. The vehicle OBD information and vehicle repair and maintenance information shall be provided to independent operators at the latest on the date on which the vehicle is placed on the market.’;

(24)

in Appendix 2, point 3 is replaced by the following:

‘3. Information required for the manufacturing of diagnostic tools

In order to facilitate the provision of generic diagnostic tools for multi-make repairers, vehicle manufacturer shall make available the information referred to in points 3.1, 3.2 and 3.3. That information shall include all diagnostic tool functions and all the links to repair information and troubleshooting instructions. The access to the information may be subject to the payment of a reasonable fee.’;

(25)

Appendix 3 is amended as follows:

(a)

in point 2, the following points 2.1.14 and 2.1.15 are added:

‘2.1.14. “Remote Service Supplier (RSS)”

“remote service supplier (RSS)” shall mean a service provider performing remotely, as a service provided to the IO in the context of its SERMI related activities, the programming, fitting or activating of parts and equipment on a vehicle.

2.1.15. “RSS employee”

“RSS employee” shall mean the employee of an approved RSS who, upon authorisation by the CAB, will have access to security-related RMI.’;

(b)

in point 3, third and fourth point are replaced by the following:

‘IOs wishing to receive security-related RMI shall obtain an approval inspection certificate from an accredited CAB.

IO employees who are to handle security-related RMI shall obtain an authorisation inspection certificate from an accredited CAB.’;

(c)

in point 4.1.1., the following point (f) is added:

‘(f) SERMI shall manage a list of sanctioned interpretations, to be used exclusively for the purpose of interpreting the scheme.’;

(d)

the following point 4.4.2 is added:

‘4.4.2. RSS shall be subject to the responsibilities and requirements laid down in point 4.4.1.’;

(e)

the following point 4.5.2 is added:

‘4.5.2. RSS employee shall be subject to the responsibilities and requirements laid down in point 4.5.1.’;

(26)

the following Appendix 4 is added:

‘’.