The method to determine the total water content of frozen and quick-frozen chickens involves determination of the water and protein contents of samples from homogenised poultry carcases. The total water content as determined is compared with the limit value given by the formulae indicated in Annex VII to Delegated Regulation (EU) 2026/343, to determine whether or not excess water has been taken up during processing. If the analyst suspects the presence of any substance which may interfere with the assessment, it is for him or her to take the necessary appropriate precautions.
‘Carcase’: the poultry carcase with bones, cartilage and any additional offal.
‘Offal’: liver, heart, gizzard and oviduct, yolks and eggs (with or without shell) obtained from spent hens at the slaughterhouse.
Water and protein contents are determined in accordance with recognised ISO (International Organisation for Standardisation) methods or other methods of analysis approved by the Council of the European Union.
The maximum total water content of the carcase is determined from the protein content of the carcase, which can be related to the physiological water content.
4.1. Scales for weighing the carcase and wrappings, accurate to at least 1 g.
4.2. Meat-axe or saw for cutting carcases into pieces of appropriate size for the mincer.
4.3. Heavy-duty mincing machine and blender capable of homogenising complete frozen or quick-frozen poultry pieces.
NB: No special mincer is recommended. It should have sufficient power to mince frozen or quick-frozen meat and bones to produce a homogeneous mixture corresponding to that obtained from a mincer fitted with a 4-mm hole disc.
4.4. Apparatus as specified in ISO 1442, for the determination of water content.
4.5. Apparatus as specified in ISO 937, for the determination of protein content.
5.1. Seven carcases are taken at random from the quantity of poultry to be checked and in each case kept frozen until analysis in accordance with points 5.2 to 5.6 begins.
The analysis shall be carried out either on each of the seven carcases separately or on a composite sample of the seven carcases.
5.2. The preparation is commenced within the one hour following the removal of the carcases from the freezer.
5.3. (a) The outside of the pack is wiped to remove superficial ice and water. Each carcase is weighed and removed from any wrapping material. After cutting up of the carcase into smaller pieces, any wrapping material around the edible offal is removed. The total weight of the carcase, including the edible offal and ice adhering to the carcase, is determined to the nearest gram after deduction of the weight of any wrapping material removed, to give ‘P1’.
In the case of a composite sample analysis, the total weight of the seven carcases, prepared in accordance with point 5.3(a), is determined to give ‘P7’.
5.4. (a) The whole carcase of which the weight is P1 is minced in a mincer as specified under point 4.3 (and, if necessary, mixed with the use of a blender as well) to obtain a homogeneous material from which a sample representative of each carcase shall then be taken.
In the case of a composite sample analysis, all seven carcases of which the weight is P7 are minced in a mincer as specified under point 4.3 (and, if necessary, mixed with the use of a blender as well) to obtain a homogeneous material from which two samples representative of the seven carcases shall then be taken. The two samples are analysed as described in points 5.5 and 5.6.
5.5. A sample of the homogenised material is taken and used immediately to determine the water content in accordance with ISO 1442 to give the water content ‘a %’.
5.6. A sample of the homogenised material is also taken and used immediately to determine the nitrogen content in accordance with ISO 937. This nitrogen content is converted to crude protein content ‘b %’ by multiplying it by the factor 6,25.
6.1. (a) The weight of water (W) in each carcase is given by aP1/100 and the weight of protein (RP) by bP1/100, both of which are expressed in grams. The sums of the weights of water (W7) and the weights of protein (RP7) in the seven carcases analysed are determined.
In the case of a composite sample analysis, the average content of water and protein from the two samples analysed is determined to give a % and b %, respectively. The weight of the water (W7) in the seven carcases is given by aP7/100, and the weight of protein (RP7) by bP7/100, both of which are expressed in grams.
6.2. The average weight of water (WA) and protein (RPA) is calculated by dividing W7 and RP7, respectively, by seven.
6.3. The theoretical physiological water content in grams as determined by this method may be calculated by the following formula:
chickens: 3,53 × RPA + 23.