Note 1 Terms in “double quotations” are defined terms. Refer to ‘Definitions of Terms used in this List’ annexed to this List.
Note 2 In some instances chemicals are listed by name and CAS number. The list applies to chemicals of the same structural formula (including hydrates) regardless of name or CAS number. CAS numbers are shown to assist in identifying a particular chemical or mixture, irrespective of nomenclature. CAS numbers cannot be used as unique identifiers because some forms of the listed chemical have different CAS numbers, and mixtures containing a listed chemical may also have different CAS numbers.
Note 3 ‘EU Dual-Use list’ refers to Annex I to Regulation (EU) 2021/821 of the European Parliament and of the Council of 20 May 2021 setting up a Union regime for the control of exports, brokering, technical assistance, transit and transfer of dual-use items (recast).
ML1 | |
Smooth-bore weapons with a calibre of less than 20 mm, other arms and automatic weapons with a calibre of 12,7 mm (calibre 0,50 inches) or less and accessories, as follows, and specially designed components therefor:
Note ML1 does not apply to:
Firearms specially designed for dummy ammunition and which are incapable of discharging a projectile;
Firearms specially designed to launch tethered projectiles having no high explosive charge or communications link, to a range of less than or equal to 500 m;
Weapons using non-centre fire cased ammunition and which are not of the fully automatic firing type;
‘Deactivated firearms’.
For the purposes of ML1. Note d., a ‘deactivated firearm’ is a firearm that has been made incapable of firing any projectile by processes defined by the national authority of the EU Member State or the Wassenaar Arrangement Participating State. These processes irreversibly modify the essential elements of the firearm. According to national laws and regulations, deactivation of the firearm may be attested by a certificate delivered by a competent authority and may be marked on the firearm by a stamp on an essential part.
Rifles and combination guns, handguns, machine, sub-machine and volley guns;
Note ML1.a. does not apply to the following:
Rifles and combination guns, manufactured earlier than 1938;
Reproductions of rifles and combination guns, the originals of which were manufactured earlier than 1890;
Handguns, volley guns and machine guns, manufactured earlier than 1890, and their reproductions;
Rifles or handguns, specially designed to discharge an inert projectile by compressed air or CO2;
Handguns specially designed for any of the following:
Slaughtering of domestic animals; or
Tranquilising of animals.
Smooth-bore weapons as follows:
Smooth-bore weapons specially designed for military use;
Other smooth-bore weapons as follows:
Fully automatic type weapons;
Semi-automatic or pump-action type weapons;
Note ML1.b.2. does not apply to weapons specially designed to discharge an inert projectile by compressed air or CO2.
Note ML1.b. does not apply to the following:
Smooth-bore weapons manufactured earlier than 1938;
Reproductions of smooth-bore weapons, the originals of which were manufactured earlier than 1890;
Smooth-bore weapons used for hunting or sporting purposes. These weapons must not be specially designed for military use or of the fully automatic firing type;
Smooth-bore weapons specially designed for any of the following:
Slaughtering of domestic animals;
Tranquillizing of animals;
Seismic testing;
Firing of industrial projectiles; or
Disrupting Improvised Explosive Devices (IEDs).
N.B. For disruptors, see ML4 and 1A006 on the EU Dual-Use List.
Weapons using caseless ammunition;
Accessories designed for arms specified by ML1.a., ML1.b. or ML1.c., as follows:
Detachable cartridge magazines;
Sound suppressors or moderators;
‘Gun-mountings’;
For the purposes of ML1.d.3., a “gun-mounting” is a fixture designed to mount a gun onto a ground vehicle, “aircraft”, vessel or structure.
Flash suppressors;
Optical weapon-sights with electronic image processing;
Optical weapon-sights specially designed for military use.
ML2 | |
Smooth-bore weapons with a calibre of 20 mm or more, other weapons or armament with a calibre greater than 12,7 mm (calibre 0,50 inches), projectors specially designed or modified for military use and accessories, as follows, and specially designed components therefor:
Guns, howitzers, cannon, mortars, anti-tank weapons, projectile launchers, military flame throwers, rifles, recoilless rifles and smooth-bore weapons;
Note 1 ML2.a. includes injectors, metering devices, storage tanks and other specially designed components for use with liquid propelling charges for any of the equipment specified by ML2.a.
Note 2 ML2.a. does not apply to weapons as follows:
Rifles, smooth-bore weapons and combination guns, manufactured earlier than 1938;
Reproductions of rifles, smooth-bore weapons and combination guns, the originals of which were manufactured earlier than 1890;
Guns, howitzers, cannons, mortars, manufactured earlier than 1890;
Smooth-bore weapons used for hunting or sporting purposes. These weapons must not be specially designed for military use or of the fully automatic firing type;
Smooth-bore weapons specially designed for any of the following:
Slaughtering of domestic animals;
Tranquillizing of animals;
Seismic testing;
Firing of industrial projectiles; or
Disrupting Improvised Explosive Devices (IEDs);
N.B. For disruptors, see ML4 and 1A006 on the EU Dual-Use List.
Hand-held projectile launchers specially designed to launch tethered projectiles having no high explosive charge or communications link, to a range of less than or equal to 500 m.
Projectors, specially designed or modified for military use, as follows:
Smoke canister projectors;
Gas canister projectors;
Pyrotechnics projectors;
Note ML2.b. does not apply to signal pistols.
Accessories specially designed for the weapons specified in ML2.a., as follows:
Weapon sights and weapon sight mounts, specially designed for military use;
Signature reduction devices;
Mountings;
Detachable cartridge magazines;
Not used since 2019.
ML3 | |
Ammunition and fuze setting devices, as follows, and specially designed components therefor:
Ammunition for weapons specified by ML1, ML2 or ML12;
Fuze setting devices specially designed for ammunition specified by ML3.a.
Note 1 Specially designed components specified by ML3 include:
Metal or plastic fabrications such as primer anvils, bullet cups, cartridge links, rotating bands and munitions metal parts;
Safing and arming devices, fuzes, sensors and initiation devices;
Power supplies with high one-time operational output;
Combustible cases for charges;
Submunitions including bomblets, minelets and terminally guided projectiles.
Note 2 ML3.a. does not apply to any of the following:
Ammunition crimped without a projectile (blank star);
Dummy ammunition with a pierced powder chamber;
Other blank and dummy ammunition, not incorporating components designed for live ammunition; or
Components specially designed for blank or dummy ammunition, specified in this Note 2.a., b. or c.
Note 3 ML3.a. does not apply to cartridges specially designed for any of the following purposes:
Signalling;
Bird scaring; or
Lighting of gas flares at oil wells.
ML4 | |
Bombs, torpedoes, rockets, missiles, other explosive devices and charges and related equipment and accessories, as follows, and specially designed components therefor:
N.B.1. For guidance and navigation equipment, see ML11.
N.B.2. For Aircraft Missile Protection Systems (AMPS), see ML4.c.
Bombs, torpedoes, grenades, smoke canisters, rockets, mines, missiles, depth charges, demolition-charges, demolition-devices, demolition-kits, “pyrotechnic” devices, cartridges, submunitions therefor and simulators (i.e. equipment simulating the characteristics of any of these items), specially designed for military use;
Note ML4.a. includes:
Smoke grenades, fire bombs, incendiary bombs and explosive devices;
Missile or rocket nozzles and re-entry vehicle nosetips.
N.B. For grenade or canister ammunition for weapons or projectors specified in ML1 or ML2 and submunitions specially designed for ammunition, see ML3.
Equipment having all of the following:
Specially designed for military use; and
Specially designed for ‘activities’ relating to any of the following:
Items specified by ML4.a.; or
Improvised Explosive Devices (IEDs);
For the purposes of ML4.b.2. ‘activities’ applies to handling, launching, laying, controlling, discharging, detonating, activating, powering with one-time operational output, decoying, jamming, sweeping, detecting, disrupting or disposing.
Note 1 ML4.b. includes:
Mobile gas liquefying equipment;
Buoyant electric conducting cable suitable for sweeping magnetic mines.
Note 2 ML4.b. does not apply to hand-held devices limited by design solely to the detection of metal objects and incapable of distinguishing between mines and other metal objects.
Aircraft Missile Protection Systems (AMPS).
Note ML4.c. does not apply to AMPS having all of the following:
Any of the following missile warning sensors:
Passive sensors having peak response between 100-400 nm; or
Active pulsed Doppler missile warning sensors;
Countermeasures dispensing systems;
Flares, which exhibit both a visible signature and an infrared signature, for decoying surface-to-air missiles; and
Installed on “civil aircraft” and having all of the following:
The AMPS is only operable in a specific “civil aircraft” in which the specific AMPS is installed and for which any of the following has been issued:
A civil Type Certificate issued by civil aviation authorities of one or more EU Member States or Wassenaar Arrangement Participating States; or
An equivalent document recognised by the International Civil Aviation Organisation (ICAO);
The AMPS employs protection to prevent unauthorised access to “software”; and
The AMPS incorporates an active mechanism that forces the system not to function when it is removed from the “civil aircraft” in which it was installed.
ML5 | |
Fire control, surveillance and warning equipment, and related systems, test and alignment and countermeasure equipment, as follows, specially designed for military use, and specially designed components and accessories therefor:
Weapon sights, bombing computers, gun laying equipment and weapon control systems;
Other fire control, surveillance and warning equipment, and related systems, as follows:
Target acquisition, designation, range-finding, surveillance or tracking systems;
Detection, recognition or identification equipment;
Data fusion or sensor integration equipment;
Countermeasure equipment for items specified by ML5.a. or ML5.b.;
Note For the purposes of ML5.c., countermeasure equipment includes detection equipment.
Field test or alignment equipment, specially designed for items specified by ML5.a., ML5.b. or ML5.c.
ML6 | |
Ground vehicles and components, as follows:
N.B. For guidance and navigation equipment, see ML11.
Ground vehicles and components therefor, specially designed or modified for military use;
Note 1 ML6.a. includes:
Tanks and other military armed vehicles and military vehicles fitted with mountings for arms or equipment for mine laying or the launching of munitions specified by ML4;
Armoured vehicles;
Amphibious and deep water fording vehicles;
Recovery vehicles and vehicles for towing or transporting ammunition or weapon systems and associated load handling equipment;
Trailers.
Note 2 Modification of a ground vehicle for military use specified by ML6.a. entails a structural, electrical or mechanical change involving one or more components that are specially designed for military use. Such components include:
Pneumatic tyre casings of a kind specially designed to be bullet-proof;
Armoured protection of vital parts (e.g. fuel tanks or vehicle cabs);
Special reinforcements or mountings for weapons;
Black-out lighting.
Other ground vehicles and components, as follows:
Vehicles having all of the following:
Manufactured or fitted with materials or components to provide ballistic protection equal to or better than level III (NIJ 0108.01, September 1985), or “equivalent standards”;
A transmission to provide drive to both front and rear wheels simultaneously, including those for vehicles having additional wheels for load bearing purposes whether driven or not;
Gross Vehicle Weight Rating (GVWR) greater than 4500 kg; and
Designed or modified for off-road use;
Components having all of the following:
Specially designed for vehicles specified in ML6.b.1.; and
Providing ballistic protection equal to or better than level III (NIJ 0108.01, September 1985), or “equivalent standards”.
N.B. See also ML13.a.
Note 1 ML6 does not apply to civil vehicles designed or modified for transporting money or valuables.
Note 2 ML6 does not apply to vehicles that meet all of the following;
Were manufactured before 1946;
Do not have items specified by the EU Common Military List and manufactured after 1945, except for reproductions of original components or accessories for the vehicle; and
Do not incorporate weapons specified in ML1, ML2 or ML4 unless they are inoperable and incapable of discharging a projectile.
ML7 | |
Chemical agents, “biological agents”, “riot control agents”, radioactive materials, related equipment, components and materials, as follows:
“Biological agents” or radioactive materials selected or modified to increase their effectiveness in producing casualties in humans or animals, degrading equipment or damaging crops or the environment;
Chemical warfare (CW) agents, including:
CW nerve agents:
O-Alkyl (equal to or less than C10, including cycloalkyl) alkyl (Methyl, Ethyl, n-Propyl or Isopropyl) - phosphonofluoridates, such as:
Sarin (GB):O-Isopropyl methylphosphonofluoridate (CAS 107-44-8); and
Soman (GD):O-Pinacolyl methylphosphonofluoridate (CAS 96-64-0);
O-Alkyl (equal to or less than C10, including cycloalkyl)
N,N-dialkyl (Methyl, Ethyl, n-Propyl or Isopropyl) phosphoramidocyanidates, such as: Tabun (GA):O-Ethyl
N,N-dimethylphosphoramidocyanidate (CAS 77-81-6);
O-Alkyl (H or equal to or less than C10, including cycloalkyl)
S-2-dialkyl (Methyl, Ethyl, n-Propyl or Isopropyl)-aminoethyl alkyl (Methyl, Ethyl, n-Propyl or Isopropyl) phosphonothiolates and corresponding alkylated and protonated salts, such as:
VX: O-Ethyl S-2-diisopropylaminoethyl methyl phosphonothiolate (CAS 50782-69-9);
CW vesicant agents:
Sulphur mustards, such as:
2-Chloroethylchloromethylsulphide (CAS 2625-76-5);
Bis(2-chloroethyl) sulphide (CAS 505-60-2);
Bis(2-chloroethylthio) methane (CAS 63869-13-6);
1,2-bis (2-chloroethylthio) ethane (CAS 3563-36-8);
1,3-bis (2-chloroethylthio) -n-propane (CAS 63905-10-2);
1,4-bis (2-chloroethylthio) -n-butane (CAS 142868-93-7) ;
1,5-bis (2-chloroethylthio) -n-pentane (CAS 142868-94-8);
Bis (2-chloroethylthiomethyl) ether (CAS 63918-90-1);
Bis (2-chloroethylthioethyl) ether (CAS 63918-89-8);
Lewisites, such as:
2-chlorovinyldichloroarsine (CAS 541-25-3);
Tris (2-chlorovinyl) arsine (CAS 40334-70-1);
Bis (2-chlorovinyl) chloroarsine (CAS 40334-69-8);
Nitrogen mustards, such as:
HN1: bis (2-chloroethyl) ethylamine (CAS 538-07-8);
HN2: bis (2-chloroethyl) methylamine (CAS 51-75-2);
HN3: tris (2-chloroethyl) amine (CAS 555-77-1);
CW incapacitating agents, such as:
3-Quinuclidinyl benzilate (BZ) (CAS 6581-06-2);
CW defoliants, such as:
Butyl 2-chloro-4-fluorophenoxyacetate (LNF);
2,4,5-trichlorophenoxyacetic acid (CAS 93-76-5) mixed with
2,4-dichlorophenoxyacetic acid (CAS 94-75-7) (Agent Orange (CAS 39277-47-9));
CW binary precursors and key precursors, as follows:
Alkyl (Methyl, Ethyl, n-Propyl or Isopropyl) Phosphonyl Difluorides, such as: DF: Methyl Phosphonyldifluoride (CAS 676-99-3);
O-Alkyl (H or equal to or less than C10, including cycloalkyl) O-2-dialkyl (Methyl, Ethyl, n-Propyl or Isopropyl)-aminoethyl alkyl (Methyl, Ethyl, n-Propyl or Isopropyl) phosphonites and corresponding alkylated and protonated salts, such as:
QL: O-Ethyl O-2-di-isopropylaminoethyl methylphosphonite (CAS 57856-11-8);
Chlorosarin: O-Isopropyl methylphosphonochloridate (CAS 1445-76-7);
Chlorosoman: O-Pinacolyl methylphosphonochloridate (CAS 7040-57-5);
“Riot control agents”, active constituent chemicals and combinations thereof, including:
α-Bromobenzeneacetonitrile, (Bromobenzyl cyanide) (CA) (CAS 5798-79-8);
[(2-chlorophenyl) methylene] propanedinitrile,
(o-Chlorobenzylidenemalononitrile) (CS) (CAS 2698-41-1);
2-Chloro-1-phenylethanone, Phenylacyl chloride
(ω-chloroacetophenone) (CN) (CAS 532-27-4);
Dibenz-(b,f)-1,4-oxazephine, (CR) (CAS 257-07-8);
10-Chloro-5,10-dihydrophenarsazine, (Phenarsazine chloride), (Adamsite), (DM) (CAS 578-94-9);
N-Nonanoylmorpholine, (MPA) (CAS 5299-64-9);
Note 1 ML7.d. does not apply to “riot control agents” individually packaged for personal self-defence purposes.
Note 2 ML7.d. does not apply to active constituent chemicals, and combinations thereof, identified and packaged for food production or medical purposes.
Equipment, specially designed or modified for military use, designed or modified for the dissemination of any of the following, and specially designed components therefor:
Materials or agents specified by ML7.a., ML7.b. or ML7.d.; or
CW agents made up of precursors specified by ML7.c.;
Protective and decontamination equipment, specially designed or modified for military use, components and chemical mixtures, as follows:
Equipment designed or modified for defence against materials specified by ML7.a., ML7.b. or ML7.d., and specially designed components therefor;
Equipment designed or modified for decontamination of objects contaminated with materials specified by ML7.a. or ML7.b., and specially designed components therefor;
Chemical mixtures specially developed or formulated for the decontamination of objects contaminated with materials specified by ML7.a. or ML7.b.;
Note ML7.f.1. includes:
Air conditioning units specially designed or modified for nuclear, biological or chemical filtration;
Protective clothing.
N.B. For civil gas masks, protective and decontamination equipment, see also 1A004 on the EU Dual-Use List.
Equipment, specially designed or modified for military use designed or modified for the detection or identification of materials specified by ML7.a., ML7.b. or ML7.d., and specially designed components therefor;
Note ML7.g. does not apply to personal radiation monitoring dosimeters.
N.B. See also 1A004 on the EU Dual-Use List.
‘Biopolymers’ specially designed or processed for the detection or identification of CW agents specified by ML7.b., and the cultures of specific cells used to produce them;
For the purposes of ML7.h.:
‘Biopolymers’ are biological macromolecules as follows:
Enzymes for specific chemical or biochemical reactions;
‘Anti-idiotypic’, ‘monoclonal’ or ‘polyclonal’ ‘antibodies’;
Specially designed or specially processed ‘receptors’;
‘Anti-idiotypic antibodies’ means antibodies which bind to the specific antigen binding sites of other antibodies;
‘Monoclonal antibodies’ means proteins which bind to one antigenic site and are produced by a single clone of cells;
‘Polyclonal antibodies’ means a mixture of proteins which bind to the specific antigen and are produced by more than one clone of cells;
‘Receptors’ means biological macromolecular structures capable of binding ligands, the binding of which affects physiological functions.
“Biocatalysts” for the decontamination or degradation of CW agents, and biological systems therefor, as follows:
“Biocatalysts” specially designed for the decontamination or degradation of CW agents specified by ML7.b., and resulting from directed laboratory selection or genetic manipulation of biological systems;
Biological systems containing the genetic information specific to the production of “biocatalysts” specified by ML7.i.1., as follows:
‘Expression vectors’;
For the purposes of ML7.i.2.a., ‘expression vectors’ are carriers (e.g. plasmid or virus) used to introduce genetic material into host cells.
Viruses;
Cultures of cells.
Note 1 ML7.b. and ML7.d. do not apply to the following:
Cyanogen chloride (CAS 506-77-4);
Hydrocyanic acid (CAS 74-90-8);
Chlorine (CAS 7782-50-5);
Carbonyl chloride (phosgene) (CAS 75-44-5);
Diphosgene (trichloromethyl-chloroformate) (CAS 503-38-8);
Not used since 2004;
Xylyl bromide, ortho: (CAS 89-92-9), meta: (CAS 620-13-3), para: (CAS 104-81-4);
Benzyl bromide (CAS 100-39-0);
Benzyl iodide (CAS 620-05-3);
Bromo acetone (CAS 598-31-2);
Cyanogen bromide (CAS 506-68-3);
Bromo methylethylketone (CAS 816-40-0);
Chloro acetone (CAS 78-95-5);
Ethyl iodoacetate (CAS 623-48-3);
Iodo acetone (CAS 3019-04-3);
Chloropicrin (CAS 76-06-2).
Note 2 The cultures of cells and biological systems specified by ML7.h. and ML7.i.2. are exclusive and these sub-items do not apply to cells or biological systems for civil purposes, such as agricultural, pharmaceutical, medical, veterinary, environmental, waste management, or in the food industry.
ML8 | |
“Energetic materials” and related substances, as follows:
N.B.1. See also 1C011 on the EU Dual-Use List.
N.B.2. For charges and devices, see ML4 and 1A008 on the EU Dual-Use List.
Note Any substance listed in the ML8 sub-items is subject to this list, even when utilised in an application other than that indicated (e.g. TAGN is predominantly used as an explosive but can also be used either as a fuel or an oxidiser).
For the purposes of ML8, excluding ML8.c.11. or ML8.c.12., ‘mixture’ refers to a composition of two or more substances with at least one substance being listed in the ML8 sub-items.
For the purposes of ML8, particle size is the mean particle diameter on a weight or volume basis. International or equivalent national standards will be used in sampling and determining particle size.
“Explosives” as follows, and ‘mixtures’ thereof:
ADNBF (aminodinitrobenzofuroxan or 7-amino-4,6-dinitrobenzofurazane-1-oxide) (CAS 97096-78-1);
BNCP (cis-bis (5-nitrotetrazolato) tetra amine-cobalt (III) perchlorate) (CAS 117412-28-9);
CL-14 (diamino dinitrobenzofuroxan or 5,7-diamino-4,6-dinitrobenzofurazane-1-oxide ) (CAS 117907-74-1);