Establishing the list of relevant raw materials to be reported under Article 6(1)(d) of Regulation 2024/1244, as well as their units, as per field 10.1 “Relevant Raw materials” [Optional for the 2027 reporting year. From the reporting year 2028, the relevant raw materials of each installation shall be reported in accordance with the rules set out in this Annex.] (Annex II of this implementing act)
For the purposes of this Annex, the following definitions shall apply:
‘Secondary raw material’ means a material which originates from outside the installation and which can be used as input to an activity replacing the virgin raw material, where the material is:
the result of a recycling or other recovery operation within the meaning of Article 3 of Directive 2008/98/EC or
a by-product, meaning a material resulting from a production process the primary aim of which is not the production of that material, and that meets the conditions laid down in Article 5 of Directive 2008/98/EC.
Blast furnace slags’ means the non-metallic co-product generated during the production of hot metal in a blast furnace, consisting predominantly of gangue from the iron ore combined with added fluxes (e.g. limestone or dolomite) and fuel ash, which forms a distinct molten phase separate from the iron and is subsequently tapped and cooled or granulated, as described for blast furnace processes in the Best available Technique Reference document (BREF) for the iron and steel sector.
‘Cullet’ means externally sourced glass generated from the recovery of waste glass used as input to the glass-melting process, regardless of its origin or previous use, including, inter alia, container glass, flat glass and automotive (vehicle) glass, that is processed for remelting during the reporting year.
‘Paper for recycling’ means secondary paper and board, including paper- or board-based products, originating from outside the installation that are supplied for use as a secondary fibre raw material in the production of paper, board or other pulp- and paper-based products, and which have been separately collected or otherwise diverted from the waste streams after use. It includes printed or unprinted paper and board, converting residues, and fibres recovered from commercial or post-consumer sources, provided they originate from outside the installation.
‘Recovered wood’ means secondary wood materials or wood-based products, originating from outside the installation, supplied for use as secondary wood raw material in the manufacture of wood-based panels or other wood products and which arise from wood discarded after use or wood residues generated in industrial processes. It includes post-consumer wood, pre-consumer wood residues, offcuts and wood packaging, provided they meet the technical specifications required for the production process.
‘Used oil’ refers to waste oils, as defined in Article 3(3) of Directive 2008/98/EC, that are used as feedstock substituting primary crude fractions and re-refined.
‘Recycled polymers’ means polymers used as raw-material inputs in the production of polymers that replace virgin polymer feedstock, originate from outside the installation, and are obtained from plastic waste through a recycling operation within the meaning of Directive 2008/98/EC, including mechanical recycling and chemical recycling. Chemically recycled content shall only be reported where supported by supplier certification or mass balance documentation. Recycled polymers shall not include:
polymers arising from internal re-use of materials within the same installation,
by-products that have not been obtained from waste through recycling; or
materials used for energy recovery.
Reporting of raw materials shall be carried out on the basis of the main activity, as set out in Section 3 of Annex I to this implementing act. “Units and metrics” are defined below. Once the relevant reportable fields have been identified in accordance with the relevant main activity, reporting shall cover the entire installation.
Operators shall not apply any reporting threshold to the reporting of raw materials under this Annex.
For the following main activities, the total annual use of the raw materials listed in Table 1 shall be reported for the entire installation, in accordance with the codes set out in Annex III to this Decision. All raw materials shall be expressed in tonnes. Materials identified for the main activity of an installation but that are not used shall be reported with a value of zero (0).
[As defined in the Iron and Steel BREF.]
Raw material | Activity covered
Blast furnace slags | A-3.4
Recycled polymers | A-4.1(h)
Paper for recycling used as feedstock for paper and board production | A-6.1(b)
Recovered wood used as feedstock for wood-based panels | A-6.1(c)
Cullet | A-3.3
Secondary wood-based feedstock (incl. secondary pulpwood, sawdust, forest residues) used as input for pulp production | A-6.1(a)
Total secondary metal used as input to the process | A-2.2, A-2.3(a), A-2.3(aa), A-2.3(b), A-2.3(ba), A-2.3(c), A-2.4, A-2.5(a), A-2.5(b), H-1
Used oil | A-1.2, A-1.4(a) and A-1.4(b)
Waste as raw material such as fly ash, blast furnace slag and ceramic waste | A-3.5(a) and A-3.5(b)