On the basis of that request, CEN revised and amended the following harmonised standards: EN 10253-2:2021 on butt-welding pipe fittings. This resulted in the following amending standard: EN 10253-2:2021+A1:2025. CEN also revised and amended the following standard: EN 12392:2016+A1:2022 on wrought and cast products of aluminium. This resulted in the adoption of the amending standard EN 12392:2025. Further, CEN revised and amended the standards EN 12953-2:2012, EN 12953-6:2011 and EN 12953-9:2007 on shell boilers. This resulted in the adoption of the amending standards EN 12953-2:2025, EN 12953-6:2024 and EN 12953-9:2024. CEN also revised and amended the following standard: EN 13134:2000 on brazing. This resulted in the following amending standard: EN ISO 17779:2025. CEN also revised and amended the standard EN 13136:2013+A1:2018 on refrigerating systems and heat pumps, resulting in the adoption of the amending standard EN ISO 24664:2024. CEN also revised and amended the following standard: EN ISO 13585:2012 on brazing. This resulted in the adoption of the following amending standard: EN ISO 13585:2024. CEN also revised and amended the following standard: EN 14129:2014. This resulted in the amending standard EN 14129:2024 on LPG equipment and accessories. CEN also revised and amended the following standard: EN 14222:2021. This resulted in the amending standard EN 14222:2021+A1:2025 on stainless steam boilers. CEN revised and amended EN 14585-1:2006 for corrugated metal hose assemblies. This resulted in the adoption of the amending standard EN 14585:2024. CEN revised and amended the following standard: EN 14917:2021 on metal bellows expansion joints. This resulted in the adoption of the amending standard EN 14917:2021+A1:2026. CEN also amended EN ISO 15493:2003/A1:2017. This resulted in the amending standard EN 15493:2003/A11:2025. CEN also revised and amended the following standard: EN ISO 15613:2004. This resulted in the adoption of the amending standard EN ISO 15613:2025. CEN revised and amended EN ISO 15614-5:2004 on welding procedures. This resulted in the adoption of the following amending standard: EN ISO 15614-5:2024. CEN also revised and amended the following standard: EN ISO 15614-11:2002 on welding procedures. This resulted in the adoption of the amending standard EN ISO 15614-11:2025. CEN revised and amended the standard EN ISO 21009-2:2015 on cryogenic vessels. This resulted in the amending standard EN ISO 21009-2:2024. CEN amended the standard EN 21922:2021 on refrigerating systems and heat pumps, resulting in the amending standard EN ISO 21922:2021/A1:2024. CEN completed standard EN 14071:2024 on LPG equipment. CEN lastly completed the standard EN ISO 14732:2025 on welding personnel.
Recital 3, Decision_act (EU) 2026/2211
In forcesince 1 Oct 2026