Recital 5, Decision_act (EU) 2026/2015

In forcesince 4 Sep 2026

On the basis of the first request, CEN and Cenelec revised the following harmonised standards, the references of which are published in the Official Journal of the European Union by Commission Implementing Decision (EU) 2023/1586 [Commission Implementing Decision (EU) 2023/1586 of 26 July 2023 on harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council (OJ L 194, 2.8.2023, p. 45, ELI: http://data.europa.eu/eli/dec_impl/2023/1586/oj).]: EN 81-3:2000+A1:2008 and its correction thereto, EN 81-3:2000+A1:2008/AC:2009, EN 869:2006+A1:2009, EN 1175:2020, EN 1248:2001+A1:2009, EN ISO 3744:2010, EN ISO 8528-13:2016, EN ISO 10218-1:2011, EN ISO 10218-2:2011, EN ISO 11680-1:2021, EN ISO 11680-2:2021, EN 12312-1:2013, EN 12622:2009+A1:2013, EN 12693:2008, EN 13001-3-5:2016+A1:2021, EN 13288:2005+A1:2009, EN ISO 13855:2010, EN ISO 14119:2013, EN ISO 16089:2015, EN 16474:2015, EN ISO 18497:2018, EN ISO 19085-4:2018, EN ISO 19085-5:2017, EN ISO 19085-6:2017, EN ISO 19085-7:2019, EN ISO 19085-8:2018, EN ISO 19085-9:2020, EN ISO 19085-11:2020, EN ISO 19085-12:2021 and its amendment thereto, EN ISO 19085-12:2021/A11:2023, EN ISO 19085-13:2020, EN ISO 19085-15:2021, EN ISO 19932-1:2013, EN ISO 19932-2:2013, EN ISO 28139:2009, EN 50434:2014 subject to a restriction, EN 50580:2012 and its amendment thereto, EN 50580:2012/A1:2013, EN 50636-2-91:2014, EN 50636-2-100:2014, EN 60335-2-40:2003 and its corrections thereto, EN 60335-2-40:2003/AC:2006, EN 60335-2-40:2003/AC:2010 and EN 60335-2-40:2003/A13:2012/AC:2013 and its amendments thereto, EN 60335-2-40:2003/A11:2004, EN 60335-2-40:2003/A12:2005, EN 60335-2-40:2003/A1:2006, EN 60335-2-40:2003/A2:2009 and EN 60335-2-40:2003/A13:2012, EN 60335-2-58:2005 and its amendments thereto, EN 60335-2-58:2005/A2:2015 and EN 60335-2-58:2005/A12:2016, EN 60745-2-12:2009, EN 60745-2-18:2009, EN 60745-2-19:2009 and its amendment thereto, EN 60745-2-19:2009/A1:2010, EN 60745-2-20:2009, and EN 60745-2-22:2011 and its amendment thereto, EN 60745-2-22:2011/A11:2013. This resulted in the adoption of the following harmonised standards: EN 81-30:2025,EN ISO 23063:2025, EN 1175:2025, EN ISO 23779:2025, EN ISO 3744:2026, EN ISO 8528-13:2026, EN ISO 10218-1:2025, EN ISO 10218-2:2025, EN ISO 11680:2025, EN 12312-1:2024, EN ISO 6909:2026, EN 12693:2026, EN ISO 13855:2024, EN 13001-3-5:2025, EN 13288:2025, EN ISO 13855:2024, EN ISO 14119:2025 and its amendment thereto, EN ISO 14119/A11:2026, EN ISO 16089:2025, EN 16474:2025, EN ISO 18497-1:2024, EN ISO 18497-2:2024, EN ISO 18497-3:2024, EN ISO 18497-4:2024, EN ISO 19085-4:2024, EN ISO 19085-5:2024, EN ISO 19085-6:2024, EN ISO 19085-7:2024, EN ISO 19085-8:2024, EN ISO 19085-9:2024, EN ISO 19085-11:2024, EN ISO 19085-12:2024, EN ISO 19085-13:2025, EN ISO 19085-15:2025, EN ISO 19932-1:2025, EN ISO 19932-2:2025, EN ISO 28139:2021 and its amendment thereto, EN ISO 28139:2021/A1:2024, EN IEC 62841-4-8:2025, EN IEC 62841-2-7:2024 and its amendment and correction thereto, EN IEC 62841-2-7:2024/A11:2024 and EN IEC 62841-2-7:2024/AC:2025-07, EN IEC 62841-4-4:2026 and its amendments thereto, EN IEC 62841-4-4:2026/A1:2026 and EN IEC 62841-4-4:2026/A11:2026, EN IEC 62841-4-6:2024 and its amendment and correction thereto, EN IEC 62841-4-6:2024/A11:2024 and EN IEC 62841-4-6:2024/AC:2026-06, EN IEC 60335-2-40:2024 and its amendment thereto, EN IEC 60335-2-40:2024/A11:2024, EN IEC 60335-2-58:2025 and its amendment thereto, EN IEC 60335-2-58:2025/A11:2025, EN IEC 62841-2-12:2024 and its amendment and correction thereto, EN IEC 62841-2-12:2024/A11:2024 and EN IEC 62841-2-12:2024/AC:2025-11, EN IEC 62841-2-18:2026 and its amendment thereto, EN IEC 62841-2-18:2026/A11:2026, EN IEC 62841-2-19:2025 and its amendment thereto, EN IEC 62841-2-19:2025/A11:2025, EN IEC 62841-2-20:2025 and its amendment thereto, EN IEC 62841-2-20:2025/A11:2025, and EN IEC 62841-2-22:2025 and its amendment thereto, EN IEC 62841-2-22:2025/A11:2025