On 13 March 2023, Germany submitted a formal objection in accordance with Article 11 of Regulation (EU) No 1025/2012 against harmonised standard EN 17476:2021 as amended by EN 17476:2021/A1:2022. Germany explained that the harmonised standard does not meet the essential requirements of points 1.1, 1.2, 1.3(a), 1.4, 2 and 3.2.2, of Annex I to Regulation (EU) 2016/426. According to Germany, the standard does not provide sufficient information on the necessary requirements for the operation of adjustment devices to interrupt the gas supply in order to extinguish flames, and therefore the appliances do not operate safely as per point 1.1 of that Annex. Additionally, Germany stated that, following the cleaning of the appliances, the different parts could also be put back incorrectly, resulting in additional risks which have not been foreseen in that harmonised standard. Moreover, as the harmonised standard does not contain a requirement for a flame-supervision device for appliances other than heaters, risks may arise in the event of unimpeded gas flow coupled with malfunctioning ventilation when the devices are used contrary to their intended purpose. Germany contends that no distinction is made between imprinted and adhesive markings, which potentially leads to a risk of damage or loss of the marking thus not respecting point 2 of that Annex. Finally, Germany argues that the burner and the gas cartridge chamber should be covered so that the highest possible temperature radiation when in operation does not create hazardous conditions, with respect to the essential requirement in point 1.3(a) of that Annex.
Recital 5, Decision_act (EU) 2026/1750
In forcesince 20 Jul 2026