In order to determine the installation-level emissions which are attributable to goods, production processes should be defined for goods to which the same functional unit applies. The functional unit should be, as the general rule, the tonnes of goods under the same CN code listed in Annex I to Regulation (EU) 2023/956. However, since for cement and fertilisers, the emissions are dependent on the clinker content and nitrogen content in the goods respectively, the functional units should be the tonnes of clinker and tonnes of nitrogen contained in those goods. For some fertilisers, a supplementary unit measuring aspects other than the weight of goods, as laid down in the Annexes to Council Regulation (EEC) No 2658/87 [Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (OJ L 256, 7.9.1987, p. 1, ELI: http://data.europa.eu/eli/reg/1987/2658/oj).], is available to account for differences in composition between goods covered by the same CN code. For those cases, that supplementary unit should constitute the functional unit. The functional units for iron and steel should be determined following the general rule, since the CN codes are already allowing differentiation in the calculation of embedded emissions. For aluminium and hydrogen, the general rule is sufficient to define a functional unit that covers goods which are sufficiently similar in their quality and composition so as to justify the definition of a unique production process for the purpose of the calculation of embedded emissions.
Recital 6, Regulation (EU) 2025/2547
In forcesince 10 Dec 2025