3 ‘ANNEX VII The single mass-based threshold, Regulation (EU) 2025/2083

In forcesince 8 Oct 2025
1.

The single mass-based threshold referred to in Article 2a shall be set at 50 tonnes of net mass.

2.

For the purpose of Article 2a(3), the following methodology shall apply:

chosen such that

Where:

99 %

is the target share of emissions;

is the mass-threshold in tonnes allowing to capture a given target share of emissions;

Annual emissions per importer

qi,j

is the quantity of imports in tonnes by importer i of the CN code j;

Ji

is the number of CN codes imported by importer i among the four sectors considered (aluminium, cement, fertilisers, iron and steel);

EIj

is the emission intensity for CN code j [The emission intensities Ej are based on default values (without mark-up) for emissions published for the transitional period. For cement and fertiliser products, direct emissions and indirect emissions are considered; for aluminium and iron and steel products, only direct emissions are considered. For future updates of the single mass-based threshold, the default values shall be set in accordance with the methods set out in Annex IV without the mark-up as referred to in point 4.1 of Annex IV.];

Total emissions:

the total emissions in CO2 of the four CBAM sectors considered, that is the sum of corresponding emissions for all importers:

,

where N is the number of importers;

:

the total quantity in tonnes of goods listed in Annex I imported by importer i;

is an indicator function equal to 1 when (that is, when an importer is importing quantities higher than the mass-threshold ), 0 otherwise.

To capture uncertainty over changes in trade patterns while maintaining the environmental objective of this Regulation, a margin of 0,25 percentage points is added to the above target share of emissions.

The single mass-based threshold shall be rounded to the nearest ten.’.