Annexes I, II and III to Regulation (EU) 2019/1782 shall continue to apply to spare part EPS until 14 December 2033 instead of the requirements set out in Annex I, II, III, IV and V to this Regulation, provided that:
in the range of products offered by the manufacturer, importer or authorised representative, there is no EPS that can be used with the powered product, which is compliant with this Regulation, except for the interoperability requirements, and
the manufacturer, importer or authorised representative clearly indicates on the packaging and the free access website specified in point 2(b) of Annex II to Regulation (EU) 2019/1782 ‘External power supply to be used exclusively as spare part for’, the replaced EPS model, and the powered product(s) they are intended to be used with.
Point 1 of Annex II to Regulation (EU) 2019/1782 shall continue to apply to EPS with a USB-PD port with a nameplate output power higher than 100 W until 14 December 2030 instead of the requirements set out in point 1 of Annex II to this Regulation.
EPS placed on the market between 14 December 2025 and 14 December 2028 which meet the requirements set out in this Regulation shall be considered to comply with the requirements of Regulation (EU) 2019/1782.