Art. 1 Regulation (EU) 2025/1065

In forcesince 28 May 2025

Regulation (EU) No 748/2012 is amended as follows:

(1)

the title is replaced by the following:

‘Commission Regulation (EU) No 748/2012 of 3 August 2012 laying down implementing rules for the airworthiness and environmental protection certification or declaration of compliance of aircraft and related products, parts, appliances, control and monitoring units and control and monitoring unit components, as well as for the capability requirements of design and production organisations (recast)’;

(2)

in Article 1(1), the introductory phrase is replaced by the following:

‘This Regulation lays down, in accordance with Articles 19, 58 and 62 of Regulation (EU) 2018/1139 of the European Parliament and of the Council, common technical requirements and administrative procedures for the airworthiness and environmental protection certification or declaration of compliance of products, parts, appliances, control and monitoring units and control and monitoring unit components specifying:

[Regulation (EU) 2018/1139 of the European Parliament and of the Council of 4 July 2018 on common rules in the field of civil aviation and establishing a European Union Aviation Safety Agency, and amending Regulations (EC) No 2111/2005, (EC) No 1008/2008, (EU) No 996/2010, (EU) No 376/2014 and Directives 2014/30/EU and 2014/53/EU of the European Parliament and of the Council, and repealing Regulations (EC) No 552/2004 and (EC) No 216/2008 of the European Parliament and of the Council and Council Regulation (EEC) No 3922/91 (OJ L 212, 22.8.2018, p. 1, ELI: http://data.europa.eu/eli/reg/2018/1139/oj).’;]

(3)

Article 9 is amended as follows:

(a)

paragraph 1 is replaced by the following:

‘1. An organisation responsible for the manufacture of products, parts, appliances, control and monitoring units and control and monitoring unit components shall demonstrate its capability in accordance with Annex I (Part 21). This demonstration of capability shall not be required for the manufacture of parts, appliances or control and monitoring unit components that are eligible, in accordance with Annex I (Part 21), for installation in a type-certified product or a control and monitoring unit, without the need to be accompanied by an authorised release certificate (EASA Form 1).’

;

(b)

paragraph 7 is replaced by the following:

‘7. By way of derogation from paragraph 1 of this Article, an organisation whose principal place of business is in a Member State and which is responsible for the manufacture of products referred to in Article 2(2) and (3) and their parts may alternatively demonstrate its capability in accordance with Annex Ib (Part 21 Light). This demonstration of capability shall not be required for the manufacture of parts that are eligible, in accordance with Annex Ib (Part 21 Light), for installation in a type-certified product or in an aircraft that has been subject to a declaration of design compliance, without the need to be accompanied by an authorised release certificate (EASA Form 1).’

;

(c)

paragraph 8 is deleted;

(4)

Annex I (Part 21) is amended in accordance with Annex I to this Regulation.