ANNEX X INDICATIVE LIST OF INVENTORY ITEMS (LII), Regulation (EU) 2025/974

In forcesince 26 May 2025
1.

The information shall be provided for each item whenever it is needed for the normal operation of the installation.

2.

The information may be provided as part of a larger set of information agreed between the Commission and the operator.

3.

The following 55 characters may be used: the 26 capital letters A to Z, figures 0 to 9 and the characters ‘plus’, ‘minus’, ‘slash’, ‘asterisk’, ‘space’, ‘equal’, ‘greater than’, ‘less than’, ‘point’, ‘comma’, ‘open bracket’, ‘close bracket’, ‘colon’, ‘dollar’, ‘percent’, ‘quotation mark’, ‘semi-colon’, ‘question mark’ and ‘ampersand’.

4.

If information is kept electronically by the installation, the list of inventory items shall be provided in electronic form.

Label/Tag | Content | Comments | #

MBA | Character (4) | MBA code of reporting MBA | 1

Report type | Character (3) | LII to be used for this report type | 2

Report date | Date (DDMMYYYY) | Date on which the LII is valid | 3

Reporting person | Character (64) | Name of person responsible for the report | 4

Report number | Number | Unique reference number | 5

Report version | Number | Version of the LII provided | 6

Label/Tag | Content | Comments | #

Line number | Number | Sequential number, no gaps | 7

Item ID | Character (20) | Unique identifier for an item of nuclear material | 8

Batch | Character (20) | Unique identifier for a batch of nuclear material | 9

Container ID | Character (20) | Unique identifier for a container holding nuclear material | 10

KMP | Character (1) | Key measurement point (KMP) | 11

Area | Character (10) | Area indication (or key measurement point) | 12

Sub area | Character (10) | Sub area indication | 13

Element category | Character (1) | Category of nuclear material | 14

Material form | Character (2) | Material form code | 15

Material container | Character (1) | Material container code | 16

Material state | Character (1) | Material state code | 17

Volume | Number (24,3) | Volume of fluid in tank | 18

Gross weight | Number (24,3) | Gross weight of the container and the nuclear material | 19

Nuclear material weight | Number (24,3) | Total weight of the nuclear material | 20

Uranium weight | Number (24,3) | Total uranium weight | 21

U233 weight | Number (24,3) | Weight uranium 233 isotope | 22

U235 weight | Number (24,3) | Weight uranium 235 isotope | 23

Plutonium weight | Number (24,3) | Total plutonium weight | 24

Thorium weight | Number (24,3) | Total thorium weight | 25

Obligation | Character (5) | Safeguard obligation | 26

Accessibility for physical verification | Character (1) | Indication of the accessibility of the item for physical verification | 27

Comment | Character (256) | Operator comment | 28

1.

MBA: Code of the reporting material balance area. This code is notified to the installation concerned by the Commission.

2.

Report type: LII to be used for this report type.

3.

Report date: Date on which the list of inventory items is valid.

4.

Reporting person: Name of the person responsible for the report.

5.

Report number: Sequential number (no gaps) for the list of inventory items.

6.

Report version: Version number of the LII. Sequential number, where the initial LII provided shall be version 1, no gaps.

7.

Line number: Sequential number starting with 1, no gaps.

8.

Item ID: Unique identifier for the item.

9.

Batch: Unique identifier for a batch of nuclear material comprising one or several items. The same batch identifier may therefore be used for several items.

10.

Container ID: Unique identifier for the container. The same container ID may be used for several items.

11.

KMP: Key measurement point. The codes are notified to the installation concerned and listed in the particular safeguard provisions. If no specific codes have been notified, ‘&’ shall be used.

12.

Area: Area where the item is located. This could be a key measurement point.

13.

Sub area: Sub area where the item is located.

14.

Element category: The element category of the nuclear material, using the category codes as laid out in Annex III (25) to this Regulation.

15.

Material form: The material form of the batch, using the description of materials as laid out in Annex III (14) to this Regulation.

16.

Material container: The type of container holding the nuclear material, using the category codes as laid out in Annex III (15) to this Regulation.

17.

Material state: The material state of the batch, using material state codes as laid out in Annex III (16) to this Regulation.

18.

Volume: Volume of fluid in a tank, to be reported in liter, with up to a maximum of three decimal places.

19.

Gross weight: Gross weight of the container and the nuclear material, to be reported in g, with up to a maximum of three decimal places.

20.

Nuclear material weight: Total weight of the nuclear material, to be reported in g, with up to a maximum of three decimal places.

21.

Uranium weight: The weight of uranium, to be reported in g, with up to a maximum of three decimal places.

22.

U233 weight: The weight of uranium-233, to be reported in g, with up to a maximum of three decimal places.

23.

U235 weight: The weight of uranium-235, to be reported in g, with up to a maximum of three decimal places.

24.

Plutonium weight: The weight of plutonium, to be reported in g, with up to a maximum of three decimal places.

25.

Thorium weight: The weight of thorium, to be reported in g, with up to a maximum of three decimal places.

26.

Obligation: Indication of the particular safeguard obligation assumed by the Community under an Agreement concluded with a third country or an international organisation, to which the material is subject (Article 19). It may also correspond to a pool code, where authorised pursuant to Article 20. The Commission shall communicate the appropriate codes to the installations on request.

27.

Accessibility for physical verification: Indication of the accessibility of the item for physical verification by Commission inspectors.

The following codes shall be used:

Accessibility | Code

Easy | E

Difficult | D

Impossible | I

Where ‘difficult’ or ‘impossible’ is used, a justification in the comment field (28) is required.

28.

Comment: Optional comment.