1 ANNEX Summary of product characteristics for a biocidal product, Regulation (EU) 2025/807

In forcesince 6 Jul 2026

C(M)IT/MIT & Glutaraldehyde Formulations

Product type(s)

PT06: Preservatives for products during storage

PT11: Preservatives for liquid-cooling and processing systems

PT12: Slimicides

Authorisation number: EU-0032888-0000

R4BP asset number: EU-0032888-0000

Trade name(s) |

Spectrum™ RX7848 MICROBIOCIDE

Biosperse™ CN7848 MICROBIOCIDE

Name and address of the authorisation holder | Name | Solenis Switzerland GmbH

Address | Mühlentalstrasse 38 8200 Schaffhausen CH

Authorisation number | | EU-0032888-0000

R4BP asset number | | EU-0032888-0000

Date of the authorisation | | 19.5.2025

Expiry date of the authorisation | | 30.4.2030

Name of manufacturer | Solenis Technologies Germany GmbH

Address of manufacturer | Fütingsweg 20 D-47805 Krefeld Germany

Location of manufacturing sites |

Solenis Technologies Germany GmbH Fütingsweg 20 D-47805 Krefeld Germany

Diversey UK Production Ltd Cotes Park Industrial Estate, Somercotes DE55 4PA Alfreton United Kingdom of Great Britain and Northern Ireland (the)

Diversey Italy Production Srl Strada Statale 235 26010 Bagnolo Cremasco (CR) Italy

Diversey España Production S.L.U Avenida Conde Duque 5, 7 y 9, Poligono Industrial La Postura 28343 Valdemoro (Madrid) Spain

Diversey Netherlands Production BV Rembrandtlaan 414 7545 ZW Enschede Netherlands (the)

Diversey Germany Production oHG Morschheimer Strasse 12 67292 Kirchheimbolanden Germany

Name of manufacturer | AD International B.V.

Address of manufacturer | Markweg Zuid 27 4794 SN Heijningen P.O. Box 102 4793 Fijnaart Netherlands (the)

Location of manufacturing sites | AD International B.V. Markweg Zuid 27 4794 SN Heijningen P.O. Box 102 4793 Fijnaart Netherlands (the)

Name of manufacturer | Solenis UK Ltd.

Address of manufacturer | Wimsey Way DE55 4LR Somercotes, Alfreton, Derbyshire United Kingdom of Great Britain and Northern Ireland (the)

Location of manufacturing sites | Solenis UK Ltd. Wimsey Way DE55 4LR Somercotes, Alfreton, Derbyshire United Kingdom of Great Britain and Northern Ireland (the)

Active substance | Glutaraldehyde

Name of manufacturer | MC (US) 3 LLC

Address of manufacturer | Route 25, Institute 25112 West Virginia United States (the)

Location of manufacturing sites | MC (US) 3 LLC Route 25, Institute 25112 West Virginia United States (the)

Active substance | Glutaraldehyde

Name of manufacturer | BASF SE

Address of manufacturer | Carl-Bosch Str. 38 67056 Ludwigshafen Germany

Location of manufacturing sites | BASF SE Carl-Bosch Str. 38 67056 Ludwigshafen Germany

Active substance | CMIT/MIT (3:1)

Name of manufacturer | Jiangsu FOPIA Chemicals Co., Ltd

Address of manufacturer | 224555, Touzeng Village, Binhuai Town, Binhai County - Yancheng City, Jiangsu China

Location of manufacturing sites | Jiangsu FOPIA Chemicals Co., Ltd 224555, Touzeng Village, Binhuai Town, Binhai County - Yancheng City, Jiangsu China

Active substance | CMIT/MIT (3:1)

Name of manufacturer | Thor GmbH

Address of manufacturer | Landwehrstraβe 1 67346 Speyer Germany

Location of manufacturing sites | Thor GmbH Landwehrstraβe 1 67346 Speyer Germany

Active substance | CMIT/MIT (3:1)

Name of manufacturer | Dalian Xingyuan Chemistry Co., Ltd

Address of manufacturer | Room 1205/1206, Pearl River International Building, No.99, Xinkai Road, Xigang District 116011 Dalian China

Location of manufacturing sites | Dalian Xingyuan Chemistry Co., Ltd Songmudao Chemical Industry Zone, Puwan New District 116308 Dalian, Liaoning China

Active substance | CMIT/MIT (3:1)

Name of manufacturer | Weifang Heaven-sent New Materials Technology Co., Ltd

Address of manufacturer | Binhai Road, Changyi Coastal Economic Development Zone 261312 Weifang, Shandong China

Location of manufacturing sites | Weifang Heaven-sent New Materials Technology Co., Ltd Binhai Road, Changyi Coastal Economic Development Zone 261312 Weifang, Shandong China

Active substance | CMIT/MIT (3:1)

Name of manufacturer | Dalian Bio-Chem Company Limited

Address of manufacturer | Songmudao Plant: Songmudao Chemical Industry Zone, Puwan New District 116308 Liaoning China

Location of manufacturing sites | Dalian Bio-Chem Company Limited Songmudao Plant: Songmudao Chemical Industry Zone, Puwan New District 116308 Liaoning China

Common name | IUPAC name | Function | CAS number | EC number | Content (%)

Glutaraldehyde | | Active substance | 111-30-8 | 203-856-5 | 7,8 % (w/w)

CMIT/MIT (3:1) | | Active substance | 55965-84-9 | | 2,89 % (w/w)

AL Any other liquid

Hazard statements |

H302: Harmful if swallowed.

H314: Causes severe skin burns and eye damage.

H317: May cause an allergic skin reaction.

H332: Harmful if inhaled.

H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.

H410: Very toxic to aquatic life with long lasting effects.

EUH071: Corrosive to the respiratory tract.

Precautionary statements |

P260: Do not breathe vapours.

P260: Do not breathe spray.

P501: Dispose of container a hazardous waste disposal service in accordance with the statutory regulations.

P264: Wash hands thoroughly after handling.

P270: Do not eat, drink or smoke when using this product.

P284: [In case of inadequate ventilation] wear respiratory protection.

P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P342+P311: If experiencing respiratory symptoms: Call a POISON CENTER/doctor.

P391: Collect spillage.

P501: Dispose of contents a hazardous waste disposal service in accordance with the statutory regulations.

P271: Use only outdoors or in a well-ventilated area.

P272: Contaminated work clothing should not be allowed out of the workplace.

P280: Wear protective gloves.

P280: Wear protective clothing.

P280: Wear eye protection.

P273: Avoid release to the environment.

P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.

P403: Store in a well-ventilated place.

P405: Store locked up.

P333+P313: If skin irritation or rash occurs: Get medical attention.

P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].

P362+P364: Take off contaminated clothing and wash it before reuse.

P310: Immediately call a POISON CENTER.

P310: Immediately call a doctor.

Product type | PT06: Preservatives for products during storage

Where relevant, an exact description of the authorised use |

Target organism(s) (including development stage) |

Scientific name: - -

Common name: - bacteria

Development stage: - -

Scientific name: - -

Common name: yeast

Development stage: - -

Field(s) of use |

indoor use

outdoor use

Intended for the control the growth of yeast and bacteria in diluted wet-end additives (mineral slurries, paper wet-end additives and paper coatings additives) and white-water (short circulation) during storage (short-term preservation up to 21 to 35 days) e.g. during paper machine shutdown, transportation between facilities. Not intended to preserve during the ongoing paper process.

Application method(s) |

Method: closed system

Detailed description:

The biocidal product shall be dosed to the additive or coating at a point to ensure adequate mixing using preferably automated metering pump or by manual addition.

Application rate(s) and frequency |

Application Rate: bacteria : 25-300 mg/l of product, yeast: 50-300 mg/l of product

Number and timing of application:

The biocidal product shall be added as a single dose into the storage tank, once per day.

Category(ies) of users | industrial

Pack sizes and packaging material |

High-density polyethylene (HDPE)

1 l, 5 l, 10 l, 20 l, 25 l pail, 220 l drum, 1000 l container, bulk

Consult the authorisation holder (as specified in the contact details on the label) to determine the optimal dosage for the various products to be preserved.

The duration and storage conditions of the preserved matrices may impact the efficacy of the product. Microbiological tests shall be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.

Use a respiratory protective equipment (RPE) in accordance with the European Standards EN 140 or EN 136 and EN 14387 or equivalent providing a minimum protection factor of 10 while loading and unloading slurry tanks if slurries/fluids or wet-end additives are not pumped in automatic procedures.

At least a powered air purifying respirator with helmet/hood/mask (TH1/TM1), or a half/full mask with combination filter gas/P2 is required (filter type (code letter, colour) shall be specified by the authorisation holder within the product information). This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full references.

Minimize the manual phase during the loading and unloading slurry tanks.

Rinse with water before the cleaning of the dispensing pump used to add the product into product to be preserved.

For the preservation of white waters in paper production:

The product shall be used only for the treatment of white waters (short-circulation).

Application is only allowed in paper factories that comply with Directive 2010/75/EU of the European Parliament and of the Council where waste water is purified in an on-site industrial sewage treatment plant including a biological treatment step in accordance with the Best Available Techniques (BAT) as prescribed in the BAT-reference document (BREF) for the production of pulp, paper and board.

The effluent shall be diluted at least 200 times.

Paper factories that are exempted from Directive 2010/75/EU shall discharge their waste water to the municipal sewer.

See Section 5.3.

See Section 5.4.

See Section 5.5.

Product type | PT11: Preservatives for liquid-cooling and processing systems

Where relevant, an exact description of the authorised use |

Target organism(s) (including development stage) |

Scientific name: - -

Common name: - cyanobacteria

Development stage: - -

Scientific name: - -

Common name: green algae

Development stage: - -

Scientific name: - -

Common name: - anaerobic bacteria

Development stage: - -

Field(s) of use |

indoor use

outdoor use

Preservation of water used in closed recirculating cooling systems to control the growth of green algae, cyanobacteria and anaerobic bacteria. The biocidal product inhibits the growth of microorganisms.

Application method(s) |

Method: closed system

Detailed description:

The biocidal product shall be dosed at a point to ensure adequate mixing using preferably automated metering pump or by manual addition.

Application rate(s) and frequency |

Application Rate: green algae and cyanobacteria: 5-200 mg/l of product, anaerobic bacteria: 25-200 mg/l of product

Number and timing of application:

The biocidal product may only be added up to 7 times per week via automated or manual dosing.

Category(ies) of users | industrial

Pack sizes and packaging material |

HDPE

1 l, 5 l, 10 l, 20 l, 25 l pail, 220 l drum, 1000 l container, bulk

Microbiological tests to prove adequacy of preservation shall be undertaken by the user in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the authorisation holder (as specified in the contact details on the label) to determine the optimal dosage for the various products to be preserved.

Rinse with water before the cleaning of the dispensing pump used to add the biocidal product into liquid to be preserved.

See Section 5.3.

See Section 5.4.

See Section 5.5.

Product type | PT11: Preservatives for liquid-cooling and processing systems

Where relevant, an exact description of the authorised use |

Target organism(s) (including development stage) |

Scientific name: - -

Common name: - green algae

Development stage: - -

Scientific name: - -

Common name: cyanobacteria

Development stage: - -

Scientific name: - -

Common name: - anaerobic bacteria

Development stage: - -

Field(s) of use |

indoor use

outdoor use

Preservation of water used in open recirculating cooling systems to control the growth of green algae, cyanobacteria and anaerobic bacteria. The biocidal product inhibits the growth of microorganisms.

Application method(s) |

Method: closed system

Detailed description:

The biocidal product shall be dosed at a point to ensure adequate mixing using preferably automated metering pump or by manual addition.

Application rate(s) and frequency |

Application Rate: green algae and cyanobacteria: 5-200 mg/l of product, anaerobic bacteria: 25-200 mg/l of product

Number and timing of application:

The biocidal product may only be added up to 7 times per week via automated or manual dosing.

Category(ies) of users | industrial

Pack sizes and packaging material |

HDPE

1 l, 5 l, 10 l, 20 l, 25 l pail, 220 l drum, 1000 l container, bulk

Microbiological tests to prove adequacy of preservation shall be undertaken by the user in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the authorisation holder (as specified in the contact details on the label) to determine the optimal dosage for the various products to be preserved.

Rinse with water before the cleaning of the dispensing pump used to add the biocidal product into liquid to be preserved.

The product may only be applied when the cooling towers are equipped with drift eliminators that reduce drift with at least 99%.

The use is restricted to small cooling systems with a maximum blowdown of 2 m3/h.

Waste water shall be discharged to the municipal sewer or purified in an on-site industrial sewage treatment plant including a biological treatment step.

See Section 5.3.

See Section 5.4.

See Section 5.5.

Product type | PT11: Preservatives for liquid-cooling and processing systems

Where relevant, an exact description of the authorised use |

Target organism(s) (including development stage) |

Scientific name: - -

Common name: - green algae

Development stage: - -

Scientific name: - -

Common name: - cyanobacteria

Development stage: - -

Scientific name: - -

Common name: - anaerobic bacteria

Development stage: - -

Field(s) of use |

indoor use

outdoor use

Preservation of water used in pasteurisers, conveyor belts and air washers. The biocidal product is applied to control the growth of green algae, cyanobacteria and anaerobic bacteria in pasteurisers, conveyor belts and air washers. The biocidal product inhibits the growth of microorganisms.

Application method(s) |

Method: closed system

Detailed description:

The biocidal product shall be dosed at a point to ensure adequate mixing using preferably automated metering pump or by manual addition.

Application rate(s) and frequency |

Application Rate: green algae and cyanobacteria: 5-200 mg/l of product, anaerobic bacteria: 25-200 mg/l of product

Number and timing of application:

The biocidal product may only be added once per batch or up to 7 times per week via automated or manual dosing depending on the system being treated.

Category(ies) of users | industrial

Pack sizes and packaging material |

HDPE

1 l, 5 l, 10 l, 20 l, 25 l pail, 220 l drum, 1000 l container, bulk

Microbiological tests to prove adequacy of preservation shall be undertaken by the user in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the authorisation holder (as specified in the contact details on the label) to determine the optimal dosage for the various products to be preserved.

Rinse with water before the cleaning of the dispensing pump used to add the biocidal product into liquid to be preserved.

See Section 5.3.

See Section 5.4.

See Section 5.5.

Product type | PT11: Preservatives for liquid-cooling and processing systems

Where relevant, an exact description of the authorised use |

Target organism(s) (including development stage) |

Scientific name: - -

Common name: - green algae

Development stage: - -

Scientific name: - -

Common name: - cyanobacteria

Development stage: - -

Scientific name: - -

Common name: - anaerobic bacteria

Development stage: - -

Field(s) of use |

indoor use

outdoor use

Preservation of recirculating water used in textile and fibre processing, photo-processing and fountain solution systems to control the growth of green algae, cyanobacteria and anaerobic bacteria. The biocidal product inhibits the growth of microorganisms.

Application method(s) |

Method: closed system

Detailed description:

The biocidal product shall be dispensed at a point to ensure adequate mixing using preferably automated metering pump or by manual addition.

Application rate(s) and frequency |

Application Rate: green algae and cyanobacteria: 5-200 mg/l of product, anaerobic bacteria: 25-200 mg/l of product

Number and timing of application:

The biocidal product may only be added once per batch or up to 7 times per week via automated or manual dosing depending on the system being treated.

Category(ies) of users | industrial

Pack sizes and packaging material |

HDPE

1 l, 5 l, 10 l, 20 l, 25 l pail, 220 l drum, 1000 l container, bulk

Microbiological tests to prove adequacy of preservation shall be undertaken by the user in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the authorisation holder (as specified in the contact details on the label) to determine the optimal dosage for the various products to be preserved.

Rinse with water before the cleaning of the dispensing pump used to add the biocidal product into liquid to be preserved.

See Section 5.3.

See Section 5.4.

See Section 5.5.

Product type | PT11: Preservatives for liquid-cooling and processing systems

Where relevant, an exact description of the authorised use |

Target organism(s) (including development stage) |

Scientific name: - -

Common name: - green algae

Development stage: - -

Scientific name: - -

Common name: - cyanobacteria

Development stage: - -

Scientific name: - -

Common name: - anaerobic bacteria

Development stage: - -

Field(s) of use |

indoor use

outdoor use

Preservation of re-circulating water used in Paint spray booths and electrodeposition coating systems to control the growth of green algae, cyanobacteria and anaerobic bacteria. The biocidal product inhibits the growth of microorganisms.

Application method(s) |

Method: closed system

Detailed description:

The biocidal product shall be dispensed at a point to ensure adequate mixing using preferably automated metering pump or by manual addition.

Application rate(s) and frequency |

Application Rate: green algae and cyanobacteria: 5-200 mg/l of product, anaerobic bacteria: 25-200 mg/l of product

Number and timing of application:

The biocidal product may only be added once per batch or up to 7 times per week via automated or manual dosing depending on the system being treated.

Category(ies) of users | industrial

Pack sizes and packaging material |

HDPE

1 l, 5 l, 10 l, 20 l, 25 l pail, 220 l drum, 1000 l container, bulk

Microbiological tests to prove adequacy of preservation shall be undertaken by the user in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the authorisation holder (as specified in the contact details on the label) to determine the optimal dosage for the various products to be preserved.

See Section 5.2.

See Section 5.3.

See Section 5.4.

See Section 5.5.

Product type | PT11: Preservatives for liquid-cooling and processing systems

Where relevant, an exact description of the authorised use |

Target organism(s) (including development stage) |

Scientific name: - -

Common name: - green algae

Development stage: - -

Scientific name: - -

Common name: - cyanobacteria

Development stage: - -

Scientific name: - -

Common name: - anaerobic bacteria

Development stage: - -

Field(s) of use |

indoor use

outdoor use

Preservation of recirculating water in heating systems to control the growth of green algae, cyanobacteria and anaerobic bacteria in recirculating water in heating systems. The biocidal product inhibits the growth of microorganisms.

Application method(s) |

Method: closed system

Detailed description:

The biocidal product shall be dispensed at a point to ensure adequate mixing using preferably automated metering pump or by manual addition.

Application rate(s) and frequency |

Application Rate: green algae and cyanobacteria: 5-200 mg/l of product, anaerobic bacteria: 25-200 mg/l of product

Number and timing of application:

The biocidal product may only be added once per batch or up to 7 times per week via automated or manual dosing depending on the system being treated.

Category(ies) of users | industrial

Pack sizes and packaging material |

HDPE

1 l, 5 l, 10 l, 20 l, 25 l pail, 220 l drum, 1000 l container, bulk

Microbiological tests to prove adequacy of preservation shall be undertaken by the user in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the authorisation holder (as specified in the contact details on the label) to determine the optimal dosage for the various products to be preserved.

Rinse with water before the cleaning of the dispensing pump used to add the biocidal product into liquid to be preserved.

See Section 5.3.

See Section 5.4.

See Section 5.5.

Product type | PT12: Slimicides

Target organism(s) (including development stage) |

Scientific name: - -

Common name: - bacteria

Development stage: - -

Field(s) of use |

indoor use

outdoor use

The biocidal product is applied as a slimicide treatment in the wet-end stage of the pulp and paper manufacturing process to prevent the growth of slime. The biocidal product inhibits the growth of microorganisms.

Application method(s) |

Method: closed system

Detailed description:

The biocidal product shall be dispensed at a point to ensure adequate mixing using preferably automated metering pump or by manual addition.

Application rate(s) and frequency |

Application Rate: 5-40 mg/l of product

Number and timing of application:

The biocidal product may only be added 4-12 times per day via automated or manual dosing.

Category(ies) of users | industrial

Pack sizes and packaging material |

HDPE

1 l, 5 l, 10 l, 20 l, 25 l pail, 220 l drum, 1000 l container, bulk

Microbiological tests to prove adequacy of preservation shall be undertaken by the user in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the authorisation holder (as specified in the contact details on the label) to determine the optimal dosage for the various products to be preserved.

Rinse with water before the cleaning of the dispensing pump used to add the biocidal product into liquid to be preserved.

This article is long: the rest is at the official publication.