Recital 8, Regulation (EU) 2025/351

In forcesince 21 Feb 2025

Regulation (EU) No 10/2011 presently lays down that substances used in the manufacture of plastic layers in plastic materials and articles are to be of a purity suitable for the intended and foreseeable use of the materials or articles. Experience shows that in order to ensure a high level of protection of human health and help business operators to assess the compliance of materials and articles with the Regulation (EU) No 10/2011, the concept of purity of substances used to manufacture food contact materials and articles should be defined. Given the current scientific information and regulatory provisions for the authorisation of substances used in the manufacturing of food contact materials and articles, it is appropriate to define the high degree of purity for substances used in the manufacturing of food contact materials or articles in relation to their identity and, as relevant, to the specifications or restrictions laid down in Annex I to Regulation (EU) No 10/2011, to a risk assessment in accordance with Article 19 or to the relevant guidance of the Authority. In this regard, in its Note for Guidance for the preparation of an application for the safety assessment of a substance to be used in plastic food contact materials [EFSA CEF Panel (EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids), 2008. Note for Guidance for the preparation of an application for the safety assessment of a substance to be used in plastic Food Contact Materials. EFSA Journal 2008; 6(7):21r, 41 pp.; https://doi.org/10.2903/j.efsa.2008.21r.], the Authority has established the principle that the higher the exposure of consumers through migration of substances in food contact materials or articles into food, the more toxicological data would be needed. In particular, the Authority considers that, where a substance used in the manufacturing of a food contact materials or article has a migration level into food below of 0,00015 mg substance/kg food (0,15 μg/kg), the risk of genotoxicity is unlikely and no toxicity testing of the migrating substance is needed [EFSA CEF Panel (EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids), 2016. Scientific opinion on recent developments in the risk assessment of chemicals in food and their potential impact on the safety assessment of substances used in food contact materials. EFSA Journal 2016;14(1):4357, 28 pp. https://doi.org/10.2903/j.efsa.2016.4357.], and that, where it has a migration level of more than 0,15 μg/kg but less than 0,05 mg/kg only data on genotoxicity tests is needed [EFSA CEF Panel (EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids), 2008. Note for Guidance for the preparation of an application for the safety assessment of a substance to be used in plastic Food Contact Materials. EFSA Journal 2008; 6(7):21r, 41 pp.; https://doi.org/10.2903/j.efsa.2008.21r.]. However, at the early stages in the manufacturing process of plastic materials and articles, the next manufacturing steps and/or the final use of the materials and articles may not be sufficiently known to calculate the migration levels of a substance into food. Therefore, to evaluate whether a substance used in the manufacturing of a food contact material or article complies with these threshold levels, it is appropriate to take into account factors that affect their concentration in and migration from the final materials and articles into food. Furthermore, where the assessment of genotoxicity of an individual substance is required, it should be possible to substitute it with an assessment of genotoxicity of a group of substances, but only under specific requirements [EFSA Scientific Committee, 2018. Genotoxicity assessment of chemical mixtures. EFSA Journal 2019;17(1):5519, 11 pp. https://doi.org/10.2903/j.efsa.2019.5519.].