No | Reference of the standard
|
EN 3-8:2021
Portable fire extinguishers – Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7
|
EN 19:2023
Industrial valves – Marking of metallic valves
|
EN 267:2009+A1:2011
Automatic forced draught burners for liquid fuels
|
EN 334:2005+A1:2009
Gas pressure regulators for inlet pressures up to 100 bar
|
EN 378-2:2016
Refrigerating systems and heat pumps – Safety and environmental requirements – Part 2: Design, construction, testing, marking and documentation
|
EN 593:2017
Industrial valves – Metallic butterfly valves for general purposes
|
EN 676:2003+A2:2008
Automatic forced draught burners for gaseous fuels
EN 676:2003+A2:2008/AC:2008
|
EN 764-4:2014
Pressure equipment – Part 4: Establishment of technical delivery conditions for metallic materials
|
EN 764-5:2014
Pressure equipment – Part 5: Inspection documentation of metallic materials and compliance with the material specification
|
EN 764-7:2002
Pressure equipment – Part 7: Safety systems for unfired pressure equipment
EN 764-7:2002/AC:2006
|
EN 1057:2006+A1:2010
Copper and copper alloys – Seamless, round copper tubes for water and gas in sanitary and heating applications
|
EN 1092-1:2018
Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 1: Steel flanges
|
EN 1092-3:2003
Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 3: Copper alloy flanges
EN 1092-3:2003/AC:2007
|
EN 1092-4:2002
Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 4: Aluminium alloy flanges
|
EN 1171:2015
Industrial valves – Cast iron gate valves
|
EN 1349:2009
Industrial process control valves
|
EN 1515-4:2021
Flanges and their joints – Bolting – Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
|
EN 1562:2019
Founding – Malleable cast irons
|
EN 1563:2018
Founding – Spheroidal graphite cast irons
|
EN 1564:2011
Founding – Ausferritic spheroidal graphite cast irons
|
EN 1591-1:2013
Flanges and their joints – Design rules for gasketed circular flange connections – Part 1: Calculation
|
EN 1591-1:2024
Flanges and their joints – Design rules for gasketed circular flange connections – Part 1: Calculation
|
EN 1626:2008
Cryogenic vessels – Valves for cryogenic service
|
EN 1653:1997
Copper and copper alloys – Plate, sheet and circles for boilers, pressure vessels and hot water storage units
EN 1653:1997/A1:2000
|
EN 1759-3:2003
Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, Class designated – Part 3: Copper alloy flanges
EN 1759-3:2003/AC:2004
|
EN 1759-4:2003
Flanges and their joint – Circular flanges for pipes, valves, fittings and accessories, class designated – Part 4: Aluminium alloy flanges
|
EN 1797:2001
Cryogenic vessels – Gas/material compatibility
|
EN 1866-2:2014
Mobile fire extinguishers – Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
|
EN 1866-3:2013
Mobile fire extinguishers – Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1
|
EN 1983:2013
Industrial valves – Steel ball valves
|
EN 1984:2010
Industrial valves – Steel gate valves
|
EN ISO 4126-1:2013
Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013)
EN ISO 4126-1:2013/A2:2019
|
EN ISO 4126-2:2019
Safety devices for protection against excessive pressure – Part 2: Bursting disc safety devices (ISO 4126-2:2018)
|
EN ISO 4126-3:2020
Safety devices for protection against excessive pressure – Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2020)
|
EN ISO 4126-4:2013
Safety devices for protection against excessive pressure – Part 4: Pilot-operated safety valves (ISO 4126-4:2013)
|
EN ISO 4126-5:2013
Safety devices for protection against excessive pressure – Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013)
|
EN ISO 4126-7:2013
Safety devices for protection against excessive pressure – Part 7: Common data (ISO 4126-7:2013)
|
EN ISO 9606-1:2017
Qualification testing of welders – Fusion welding – Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
|
EN ISO 9606-2:2004
Qualification test of welders – Fusion welding – Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
|
EN ISO 9606-3:1999
Approval testing of welders – Fusion welding – Part 3: Copper and copper alloys (ISO 9606-3:1999)
|
EN ISO 9606-4:1999
Approval testing of welders – Fusion welding – Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
|
EN ISO 9606-5:2000
Approval testing of welders – Fusion welding – Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)
|
EN ISO 9712:2022
Non-destructive testing – Qualification and certification of NDT personnel (ISO 9712:2021)
|
EN 10028-1:2017
Flat products made of steels for pressure purposes – Part 1: General requirements
|
EN 10028-2:2017
Flat products made of steels for pressure purposes – Part 2: Non-alloy and alloy steels with specified elevated temperature properties
|
EN 10028-3:2017
Flat products made of steels for pressure purposes – Part 3: Weldable fine grain steels, normalized
|
EN 10028-4:2017
Flat products made of steels for pressure purposes – Part 4: Nickel alloy steels with specified low temperature properties
|
EN 10028-5:2017
Flat products made of steels for pressure purposes – Part 5: Weldable fine grain steels, thermomechanically rolled
|
EN 10028-6:2017
Flat products made of steels for pressure purposes – Part 6: Weldable fine grain steels, quenched and tempered
|
EN 10028-7:2016
Flat products made of steels for pressure purposes – Part 7: Stainless steels
|
EN 10204:2004
Metallic products – Types of inspection documents
|
EN 10213:2007+A1:2016
Steel castings for pressure purposes
|
EN 10216-1:2013
Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 1: Non-alloy steel tubes with specified room temperature properties
|
EN 10216-2:2013
Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
|
EN 10216-2:2024
Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
|
EN 10216-3:2013
Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 3: Alloy fine grain steel tubes
|
EN 10216-4:2013
Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
|
EN 10216-5:2021
Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 5: Stainless steel tubes
|
EN 10217-1:2019
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
|
EN 10217-2:2019
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
|
EN 10217-3:2019
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
|
EN 10217-4:2019
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
|
EN 10217-5:2019
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
|
EN 10217-6:2019
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
|
EN 10217-7:2021
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 7: Stainless steel tubes
|
EN 10222-1:2017
Steel forgings for pressure purposes – Part 1: General requirements for open die forgings
|
EN 10222-2:2017+A1:2021
Steel forgings for pressure purposes – Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
|
EN 10222-3:2017
Steel forgings for pressure purposes – Part 3: Nickel steels with specified low temperature properties
|
EN 10222-4:2017+A1:2021
Steel forgings for pressure purposes – Part 4: Weldable fine grain steels with high proof strength
|
EN 10222-5:2017
Steel forgings for pressure purposes – Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
|
EN 10253-2:2021
Butt-welding pipe fittings – Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
|
EN 10253-2:2021+A1:2025
Butt-welding pipe fittings – Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
|
EN 10253-4:2008
Butt-welding pipe fittings – Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
EN 10253-4:2008/AC:2009
|
EN 10253-4:2025
Butt-welding pipe fittings – Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
|
EN 10269:2013
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
|
EN 10272:2016
Stainless steel bars for pressure purposes
|
EN 10273:2016
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
|
EN 10305-4:2016
Steel tubes for precision applications – Technical delivery conditions – Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
|
EN 10305-6:2016
Steel tubes for precision applications – Technical delivery conditions – Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
|
EN ISO 10931:2005
Plastics piping systems for industrial applications – Poly(vinylidene fluoride) (PVDF) – Specifications for components and the system (ISO 10931:2005)
EN ISO 10931:2005/A1:2015
|
EN 12178:2016
Refrigerating systems and heat pumps – Liquid level indicating devices – Requirements, testing and marking
|
EN 12263:1998
Refrigerating systems and heat pumps – Safety switching devices for limiting the pressure – Requirements and tests
|
EN 12261:2024
Gas meters – Turbine gas meters
|
EN 12266-1:2012
Industrial valves – Testing of metallic valves – Part 1: Pressure tests, test procedures and acceptance criteria – Mandatory requirements
|
EN 12288:2010
Industrial valves – Copper alloy gate valves
|
EN 12392:2016
Aluminium and aluminium alloys – Wrought products and cast products – Special requirements for products intended for the production of pressure equipment
|
EN 12392:2025
Aluminium and aluminium alloys – Wrought products and cast products – Special requirements for products intended for the production of pressure equipment
|
EN 12420:2014
Copper and copper alloys – Forgings
|
EN 12420:2024
Copper and copper alloys – Forgings
|
EN 12434:2000
Cryogenic vessels – Cryogenic flexible hoses
EN 12434:2000/AC:2001
|
EN 12451:2012
Copper and copper alloys – Seamless, round tubes for heat exchangers
|
EN 12452:2012
Copper and copper alloys – Rolled, finned, seamless tubes for heat exchangers
|
EN 12516-1:2014+A1:2018
Industrial valves – Shell design strength – Part 1: Tabulation method for steel valve shells
|
EN 12516-2:2014+A1:2021
Industrial valves – Shell design strength – Part 2: Calculation method for steel valve shells
|
EN 12516-3:2002
Valves – Shell design strength – Part 3: Experimental method
EN 12516-3:2002/AC:2003
|
EN 12516-4:2014+A1:2018
Industrial valves – Shell design strength – Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
|
EN 12542:2020
LPG equipment and accessories – Static welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 – Design and manufacture
|
EN 12735-1:2020
Copper and copper alloys – Seamless, round tubes for air conditioning and refrigeration – Part 1: Tubes for piping systems
|
EN 12735-2:2016
Copper and copper alloys – Seamless, round tubes for air conditioning and refrigeration – Part 2: Tubes for equipment
|
EN 12735-2:2024
Copper and copper alloys – Seamless, round tubes for air conditioning and refrigeration – Part 2: Tubes for equipment
|
EN 12778:2002
Cookware – Pressure cookers for domestic use
EN 12778:2002/A1:2005
EN 12778:2002/AC:2003
|
EN 12952-1:2015
Water-tube boilers and auxiliary installations – Part 1: General
|
EN 12952-2:2021
Water-tube boilers and auxiliary installations – Part 2: Materials for pressure parts of boilers and accessories
|
EN 12952-3:2022
Water-tube boilers and auxiliary installations – Part 3: Design and calculation for pressure parts of the boiler
|
EN 12952-5:2021
Water-tube boilers and auxiliary installations – Part 5: Workmanship and construction of pressure parts of the boiler
|
EN 12952-6:2021
Water-tube boilers and auxiliary installations – Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler
|
EN 12952-7:2012
Water-tube boilers and auxiliary installations – Part 7: Requirements for equipment for the boiler
|
EN 12952-8:2022
Water-tube boilers and auxiliary installations – Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler
|
EN 12952-9:2022
Water-tube boilers and auxiliary installations – Part 9: Requirements for firing systems for pulverized solid fuels for the boiler
|
EN 12952-10:2021
Water-tube boilers and auxiliary installations – Part 10: Requirements for safety devices against excessive pressure
|
EN 12952-11:2007
Water-tube boilers and auxiliary installations – Part 11: Requirements for limiting devices of the boiler and accessories
|
EN 12952-14:2004
Water-tube boilers and auxiliary installations – Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution
|
EN 12952-16:2022
Water-tube boilers and auxiliary installations – Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler
|
EN 12952-18:2012
Water-tube boilers and auxiliary installations – Part 18: Operating instructions
|
EN 12953-1:2012
Shell boilers – Part 1: General
|
EN 12953-2:2012
Shell boilers – Part 2: Materials for pressure parts of boilers and accessories
|
EN 12953-2:2025
Shell boilers – Part 2: Materials for pressure parts of boilers and accessories
|
EN 12953-3:2016
Shell boilers – Part 3: Design and calculation for pressure parts
|
EN 12953-4:2018
Shell boilers – Part 4: Workmanship and construction of pressure parts of the boiler
|
EN 12953-5:2020
Shell boilers – Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
|
EN 12953-6:2011
Shell Boilers – Part 6: Requirements for equipment for the boiler
|
EN 12953-6:2024
Shell Boilers – Part 6: Requirements for equipment for the boiler
Restriction: Compliance with paragraphs 5.1.6 and 5.3.1 of EN 12953-6:2024 as well as with its Annex F does not confer a presumption of conformity with the essential health and safety requirement set out in point 2.3 of Annex I to Directive 2014/68/EU.
Compliance with Annex F to and paragraph 5.6.1.1 of EN 12953-6:2024 does not confer a presumption of conformity with the essential health and safety requirement set out in point 2.10 of Annex I to Directive 2014/68/EU.
Compliance with paragraph 5.6.1.1 of EN 12953-6:2024 does not confer a presumption of conformity with the essential health and safety requirement set out in point 2.11.1 of Annex I to Directive 2014/68/EU.
Compliance with paragraph 5.6.1.1 of EN 12953-6:2024 does not confer a presumption of conformity with the essential health and safety requirement set out in point 5, second paragraph, point a, of Annex I to Directive 2014/68/EU.
|
EN 12953-7:2002
Shell boilers – Part 7: Requirements for firing systems for liquid and gaseous fuels for the boilers
|
EN 12953-8:2001
Shell boilers – Part 8: Requirements for safeguards against excessive pressure
EN 12953-8:2001/AC:2002
|
EN 12953-9:2007
Shell boilers – Part 9: Requirements for limiting devices of the boiler and accessories
|
EN 12953-9:2024
Shell boilers – Part 9: Requirements for limiting devices of the boiler and accessories
|
EN 12953-12:2003
Shell boilers – Part 12: Requirements for grate firing systems for solid fuels for the boiler
|
EN 12953-13:2012
Shell boilers – Part 13: Operating instructions
|
EN 13121-1:2021
GRP tanks and vessels for use above ground – Part 1: Raw materials – Specification conditions and acceptance criteria
|
EN 13121-2:2003
GRP tanks and vessels for use above ground – Part 2: Composite materials – Chemical resistance
|
EN 13121-3:2016
GRP tanks and vessels for use above ground – Part 3: Design and workmanship
|
EN 13134:2000
Brazing – Procedure approval
|
EN ISO 17779:2025
Brazing – Specification and qualification of brazing procedures for metallic materials (ISO 17779:2021)
|
EN 13136:2013+A1:2018
Refrigerating systems and heat pumps – Pressure relief devices and their associated piping – Methods for calculation
|
EN ISO 24664:2024
Refrigerating systems and heat pumps – Pressure relief devices and their associated piping – Methods for calculation (ISO 24664:2024)
|
EN 13175:2019+A1:2020
LPG Equipment and accessories – Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
|
EN 13348:2016
Copper and copper alloys – Seamless, round copper tubes for medical gases or vacuum
|
EN 13371:2001
Cryogenic vessels – Couplings for cryogenic service
|
EN 13397:2001
Industrial valves – Diaphragm valves made of metallic materials
|
EN 13445-1:2021
Unfired pressure vessels – Part 1: General
|
EN 13445-2:2021+A1:2023
Unfired pressure vessels – Part 2: Materials
|
EN 13445-3:2021
Unfired pressure vessels – Part 3: Design
|
EN 13445-4:2021+A1:2023
Unfired pressure vessels – Part 4: Fabrication
|
EN 13445-5:2021
Unfired pressure vessels – Part 5: Inspection and testing
|
EN 13445-5:2021+A1:2024
Unfired pressure vessels – Part 5: Inspection and testing
|
EN 13445-6:2021
Unfired pressure vessels – Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
|
EN 13445-8:2021
Unfired pressure vessels – Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
|
EN 13445-10:2021
Unfired pressure vessels – Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
|
EN 13458-1:2002
Cryogenic vessels – Static vacuum insulated vessels – Part 1: Fundamental requirements
|
EN 13458-2:2002
Cryogenic vessels – Static vacuum insulated vessels – Part 2: Design, fabrication, inspection and testing
EN 13458-2:2002/AC:2006
|
EN 13480-1:2017
Metallic industrial piping – Part 1: General
EN 13480-1:2017/A1:2019
|
EN 13480-2:2017
Metallic industrial piping – Part 2: Materials
EN 13480-2:2017/A3:2018
EN 13480-2:2017/A1:2018
EN 13480-2:2017/A2:2018
EN 13480-2:2017/A7:2020
EN 13480-2:2017/A8:2021
|
EN 13480-3:2017
Metallic industrial piping – Part 3: Design and calculation
EN 13480-3:2017/A3:2020
EN 13480-3:2017/A2:2020
EN 13480-3:2017/A1:2021
EN 13480-3:2017/A4:2021
EN 13480-3:2017/A5:2022
|
EN 13480-4:2012
Metallic industrial piping – Part 4: Fabrication and installation
EN 13480-4:2012/A1:2013
EN 13480-4:2012/A2:2015
|
EN 13480-5:2017
Metallic industrial piping – Part 5: Inspection and testing
EN 13480-5:2017/A1:2019
EN 13480-5:2017/A2:2021
|
EN 13480-6:2017
Metallic industrial piping – Part 6: Additional requirements for buried piping
EN 13480-6:2017/A1:2019
|
EN 13480-8:2017
Metallic industrial piping – Part 8: Additional requirements for aluminium and aluminium alloy piping
|
EN 13547:2013
Industrial valves – Copper alloy ball valves
|
EN ISO 13585:2012
Brazing – Qualification test of brazers and brazing operators (ISO 13585:2012)
|
EN ISO 13585:2024
Brazing – Qualification testing of brazers and brazing operators (ISO 13585:2021)
|
EN 13648-1:2008
Cryogenic vessels – Safety devices for protection against excessive pressure – Part 1: Safety valves for cryogenic service
|
EN 13648-2:2002
Cryogenic vessels – Safety devices for protection against excessive pressure – Part 2: Bursting disc safety devices for cryogenic service
|
EN 13709:2010
Industrial valves – Steel globe and globe stop and check valves
|
EN 13789:2010
Industrial valves – Cast iron globe valves
|
EN 13799:2022
LPG equipment and accessories – Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
|
EN 13831:2007
Closed expansion vessels with built in diaphragm for installation in water
|
EN 13835:2012
Founding – Austenitic cast irons
|
EN 13923:2005
Filament-wound FRP pressure vessels – Materials, design, manufacturing and testing
|
EN 14129:2014
LPG Equipment and accessories – Pressure relief valves for LPG pressure vessels
|
EN 14129:2024
LPG Equipment and accessories – Pressure relief valves for LPG pressure vessels
|
EN 14197-1:2003
Cryogenic vessels – Static non-vacuum insulated vessels – Part 1: Fundamental requirements
|
EN 14197-2:2003