2 ‘ANNEX II LIST OF ITEMS REFERRED TO IN ARTICLE 2, Regulation (EU) 2024/2897

In forcesince 18 Nov 2024
1.

Where “ex” precedes the HS/CN code, the goods covered by Regulation (EU) 2023/1529 constitute only a part of the scope of the HS/CN code and are determined by both the description given in this Annex and the scope of the HS/CN code.

2.

Definitions of terms between “single quotation marks” are given in a technical note to the relevant item.

3.

Definitions of terms between “double quotation marks” can be found in Annex I to Regulation (EU) 2021/821.

[Ref. Annex I to Regulation (EU) 2021/821] [Ref. Annex I to Regulation (EU) 2021/821] [Ref. Annex I to Regulation (EU) 2021/821] [Ref. Annex I to Regulation (EU) 2021/821] [Ref. Annex II to Regulation (EU) No 267/2012] [Ref. Annex II to Regulation (EU) No 267/2012] [Ref. Annex I to Regulation (EU) 2021/821] [Ref. Annex I to Regulation (EU) 2021/821]

Description | HS/CN code

Energetic materials as follows and mixtures thereof:

Ammonium picrate (CAS 131-74-8); | ex29089900

Black powder; | ex36010000

Hexanitrodiphenylamine (CAS 131-73-7); | ex29214400

Difluoroamine(CAS 10405-27-3); | ex28129000

Nitrostarch (CAS 9056-38-6); | ex35051050

Tetranitronaphthalene (CAS 28995-89-3, CAS 4793-98-0); | ex29029000

Trinitroanisol (CAS 606-35-9); | ex29093090

Trinitronaphthalene (CAS 55810-17-8, CAS 2243-94-9); | ex29029000

Trinitroxylene (CAS 632-92-8); |

ex29024100

ex29024200

ex29024300

ex29024400

N-methyl-2-pyrrolidinone; 1-methyl-2-pyrrolidinone (CAS 872-50-4); | ex29397990

Dioctylmaleate (CAS 142-16-5); | ex29171980

Ethylhexylacrylate (CAS 103-11-7); | ex29161200

Triethylaluminium (TEA) (CAS 97-93-8), trimethylaluminium (TMA) (CAS 75-24-1), and other pyrophoric metal alkyls and aryls of lithium, sodium, magnesium, zinc or boron; | ex29319000

Nitrocellulose (CAS 9004-70-0); | 391220

Nitroglycerin (or glyceroltrinitrate, trinitroglycerine) (NG) (CAS 55-63-0); | ex29209070

2,4,6-trinitrotoluene (TNT) (CAS 118-96-7); | ex29042000

Ethylenediaminedinitrate (EDDN) (CAS 20829-66-7); | ex29209070

Pentaerythritoltetranitrate (PETN) (CAS 78-11-5); | ex29209070

Lead azide (CAS 13424-46-9), normal lead styphnate(CAS 15245-44-0) and basic lead styphnate (CAS 12403-82-6), and primary explosives or priming compositions containing azides or azide complexes; |

ex28500060

ex29089900

Diethyldiphenylurea (CAS 85-98-3); dimethyldiphenylurea(CAS 611-92-7); methylethyldiphenyl urea | ex29242100

N,N-diphenylurea (unsymmetrical diphenylurea) (CAS 603-54-3); | ex29242100

Methyl-N,N-diphenylurea (methyl unsymmetrical diphenylurea) (CAS 13114-72-2); | ex29242100

Ethyl-N,N-diphenylurea (ethyl unsymmetrical diphenylurea) (CAS 64544-71-4); | ex29242100

4-Nitrodiphenylamine (4-NDPA)(CAS 836-30-6); | ex29214400

2,2-dinitropropanol (CAS 918-52-5); | ex29055998

Fibrous and filamentary materials, not controlled by 1C010 or 1C210, for use in “composite” structures and with a specific modulus of 3,18 x 106 m or greater and a specific tensile strength of 7,62 x 104 m or greater |

ex540211

ex550111

ex550311

ex681511

ex681512

ex681519

ex70191910

Nanomaterials as follows:

a.

Semiconductor nanomaterials;

b.

Composite-based nanomaterials; or

c.

Any of the following carbon-based nanomaterials:

1.

Carbon nanotubes;

2.

Carbon nanofibres;

3.

Fullerenes;

4.

Graphenes; or

5.

Carbon onions.

Notes: For the purposes of this control, nanomaterial means a material that meets at least one of the following criteria:

1.

Consists of particles, with one or more external dimensions in the size range 1 - 100 nm for more than 1 % of their number size distribution;

2.

Has internal or surface structures in one or more dimensions in the size range 1 - 100 nm; or

3.

Has a specific surface area by volume greater than 60 m2/cm3, excluding materials consisting of particles with a size lower than 1 nm

ex280530

ex284610

ex284690

ex540211

ex550111

ex550311

ex681511

ex681512

ex681513

ex681519

ex701912

ex701919

Tungsten, tungsten carbide and alloys, not controlled by 1C117, 1C226, II.A1.013 or II.A1.017, containing more than 90 % tungsten by weight.

Note 1: For the purposes of this control, wire is excluded

Note 2: For the purposes of this control, surgical or medical instruments are excluded

28499030

ex810110

ex810194

ex810197

ex810199

Ultra-High-Molecular-Weight Polyethylene (UHMWPE), not controlled by 1C010 or 1C210, presented in any of the following forms:

a.

Primary forms;

b.

Filament yarn or monofilaments;

c.

Filament tows;

d.

Rovings;

e.

Staple or chopped fibres;

f.

Fabrics;

g.

Pulp or flocks.

ex39012010

ex39012090

ex540239

ex540249

ex540259

ex540269

ex54049090

ex54072011

ex54072019

ex550190

ex550390

ex550690

ex560130

[Ref. Annex I to Regulation (EU) 2021/821] [Ref. Annex I to Regulation (EU) 2021/821]

Description | HS/CN code

Bearings and bearing systems not controlled by 2A001 and 2A101:

a.

Ball bearings or Solid ball bearings, having tolerances specified by the manufacturer in accordance with ABEC 7, ABEC 7P, or ABEC 7T or ISO Standard Class 4 or better (or equivalents) and having any of the following characteristics;

1.

Manufactured for use at operating temperatures above 573 K (300 oC) either by using special materials or by special heat treatment; or

2.

With lubricating elements or component modifications that, according to the manufacturer’s specifications, are specially designed to enable the bearings to operate at speeds exceeding 2,3 million “DN”;

b.

Solid tapered roller bearings, having tolerances specified by the manufacturer in accordance with ANSI/ABMA Class 00 (inch) or Class A (metric) or better (or equivalents) and having either of the following characteristics:

1.

With lubricating elements or component modifications that, according to the manufacturer’s specifications, are specially designed to enable the bearings to operate at speeds exceeding 2,3 million “DN”; or

2.

Manufactured for use at operating temperatures below 219 K (-54 oC) or above 423 K (150 oC);

c.

Gas-lubricated foil bearing manufactured for use at operating temperatures of 561 K (288 oC) or higher and a unit load capacity exceeding 1 MPa;

d.

Active magnetic bearing systems;

e.

Fabric-lined self-aligning or fabric-lined journal sliding bearings manufactured for use at operating temperatures below 219 K (-54 oC) or above 423 K (150 oC).

ex848210

ex848220

ex848230

ex848240

ex848250

ex848280

ex848291

1.

“DN” is the product of the bearing bore diameter in mm and the bearing rotational velocity in rpm.

2.

Operating temperatures include those temperatures obtained when a gas turbine engine has stopped after operation

Concealed object detection equipment operating in the frequency range from 30 GHz to 3000 GHz and having a spatial resolution of 0,1 mrad (milliradian) up to and including 1 mrad (milliradian) at a standoff distance of 100 m; and components, other than those specified in the CML or in Regulation (EU) 2021/821.

Note: Concealed object detection equipment includes but is not limited to equipment for screening people, documents, baggage, other personal effects, cargo and/or mail.

The range of frequencies span what is generally considered as the millimetre-wave, submillimetre-wave and terahertz frequency regions.

ex852610

ex852692

ex84821090

“Numerical control” units for machine tools and “numerically controlled” machine tools, other than those specified in the CML or in Regulation (EU) 2021/821 (see List of Items Controlled):

a.

“Numerical control” units for machine tools:

1.

Having four interpolating axes that can be coordinated simultaneously for contouring control; or

2.

Having two or more axes that can be coordinated simultaneously for contouring control and a minimum programmable increment better (less) than 0,001 mm;

3.

“Numerical control” units for machine tools having two, three or four interpolating axes that can be coordinated simultaneously for contouring control, and capable of receiving directly (on-line) and processing computer-aided-design (CAD) data for internal preparation of machine instructions; or

b.

Motion control boards specially designed for machine tools and having any of the following characteristics:

1.

Interpolation in more than four axes;

2.

Capable of real-time processing of data to modify tool path, feed rate and spindle data, during the machining operation, by any of the following:

a.

Automatic calculation and modification of part program data for machining in two or more axes by means of measuring cycles and access to source data; or

b.

Adaptive control with more than one physical variable measured and processed by means of a computing model (strategy) to change one or more machining instructions to optimize the process; or

3.

Capable of receiving and processing CAD data for internal preparation of machine instructions;

c.

“Numerically controlled” machine tools that, according to the manufacturer’s technical specifications, can be equipped with electronic devices for simultaneous contouring control in two or more axes and that have both of the following characteristics:

1.

Two or more axes that can be coordinated simultaneously for contouring control; and

2.

Positioning accuracies according to ISO 230/2 (2006), with all compensations available:

a.

Better than 15 μm along any linear axis (overall positioning) for grinding machines;

b.

Better than 15 μm along any linear axis (overall positioning) for milling machines; or

c.

Better than 15 μm along any linear axis (overall positioning) for turning machines; or

d.

Machine tools, as follows, for removing or cutting metals, ceramics or “composites”, that, according to the manufacturer’s technical specifications, can be equipped with electronic devices for simultaneous contouring control in two or more axes:

1.

Machine tools for turning, grinding, milling or any combination thereof, having two or more axes that can be coordinated simultaneously for contouring control and having any of the following characteristics:

a.

One or more contouring “tilting spindles”;

Note: this applies to machine tools for grinding or milling only.

b.

“Camming” (axial displacement) in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR);

Note: this applies to machine tools for turning only.

c.

“Run-out” (out-of-true running) in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); or

d.

The positioning accuracies, with all compensations available, are less (better) than: 0,001o on any rotary axis;

2.

Electrical discharge machines (EDM) of the wire feed type that have five or more axes that can be coordinated simultaneously for contouring control.

ex85371010

ex85371098

ex845630

ex845710

ex845720

ex845730

ex845811

ex845891

ex845910

ex845931

ex845951

ex845961

ex846012

ex846022

ex846023

ex846024

Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex:

a.

Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (“run-out”) or axial (“camming”) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR);

b.

Single point diamond cutting tool inserts, having all of the following characteristics:

1.

Flawless and chip-free cutting edge when magnified 400 times in any direction;

2.

Cutting radius from 0,1 to 5 mm inclusive; and

3.

Cutting radius out-of-roundness less (better) than 0,002 mm TIR.

c.

Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, “numerical control” units, machine tools or feed-back devices to or above the levels specified in this Annex.

This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.

ex820719

ex820720

ex820750

ex820760

ex820790

ex846610

ex84662020

ex84662091

ex84662098

ex846630

ex846693

“Software” specially designed for the “development”, “production”, or “use” of the machine tools controlled in this Annex |

“Numerical controlled” machine tools, having one or more linear axis with a travel length greater than 8000 mm. |

ex8456

ex8457

ex8458

ex8459

ex8460

Description | HS/CN code

Integrated circuits as follows: Field Programable Gate Array (FPGA), microcontrollers, microprocessors, signal processors, signal analysers, Analogue-to-Digital Converters (ADC), voltage regulators, video encoders and DC-DC converters |

ex854231

ex854239

“Monolithic Microwave Integrated Circuits” (“MMIC”) amplifiers and devices |

ex854233

85437002

RF filters or Electromagnetic Interference (EMI) filters | ex854800

Tantalum capacitors | 853221

Aluminium electrolytic capacitors | 853222

Ceramic dielectric multilayer capacitors | 853224

Storage integrated circuits, as follows:

a.

Electrically erasable programmable read-only memories (EEPROMs) with a storage capacity;

1.

Exceeding 16 Mbits per package for flash memory types; or

2.

Exceeding either of the following limits for all other EEPROM types:

a.

Exceeding 1 Mbit per package; or

b.

Exceeding 256 kbit per package and a maximum access time of less than 80 ns;

b.

Static random access memories (SRAMs) with a storage capacity:

1.

Exceeding 1 Mbit per package; or

2.

Exceeding 256 kbit per package and a maximum access time of less than 25 ns

ex854232

Mounted piezo-electric crystals | 854160

“Semiconductor devices” fulfilling the military standard MIL-STD-750D or other equivalent standard.

Technical note: For the purposes of this control “semiconductor devices” are electronic components that rely on the electronic properties of a semiconductor material, such as diodes, transducers, photosensitive devices, thyristors, diacs, triacs or transistors, including metal–oxide–semiconductor field-effect transistors (MOSFETs), FETs, FINFETs, IGBT, etc

ex854110

ex854121

ex854129

ex854130

ex854149

ex854151

ex854159

Electrical plugs, connectors, jacks, jumpers, terminals, sockets or adapters, having any of the following:

a.

Rated for operation at an ambient temperature above 398K (125 oC);

b.

Rated for operation at an ambient temperature below 218K (-55 oC); or

c.

Rated for operation over the entire ambient temperature range from 218K (-55 oC) to 398K (125 oC).

ex853669

ex853690

Equipment for the manufacture of Printed Circuit Boards (PCBs) and specially designed components and accessories therefor, as follows:

a.

Film processing equipment;

b.

Solder mask coating equipment;

c.

Photo plotter equipment;

d.

Plating or electroplating deposition equipment;

e.

Vacuum chambers and presses;

f.

Roll laminators;

g.

Alignment equipment; or

h.

Etching equipment.

ex84248940

ex84798970

ex85433040

ex848640

ex84201081

ex84799015

Automated optical inspection equipment for testing Printed Circuit Boards (PCBs), based on optical or electrical sensors, and capable to detect any of the following quality defects:

a.

Spacing, area, volume or height;

b.

Bill boarding;

c.

Components (presence, absence, flipped, offset, polarity, or skew);

d.

Solder (bridging, insufficient solder joints);

e.

Leads (insufficient paste, lifting);

f.

Tombstoning; or

g.

Electrical (shorts, opens, resistance, capacitance, power, grid performance).

ex903031

ex903032

ex90303320

ex90303370

ex90303900

ex903084

ex903089

ex90314910

ex90314990

ex90318020

ex90318080

Chemicals and materials of the type used in the production of Printed Circuit Boards (PCBs), as follows:

a.

PCB “composite” substrates made of glass fibre or cotton (e.g. FR-4, FR-2, FR 6, CEM-1, G-10, etc.);

b.

Multilayer PCB substrates, containing at least one layer of any of the following materials:

1.

Aluminium;

2.

Polytetrafluoroethylene (PTFE); or

3.

Ceramic materials (e.g. alumina, titanium oxide, etc.);

c.

Etchant chemicals;

1.

Ferric chloride (7705-08-0);

2.

Cupric chloride (7447-39-4);

3.

Ammonium persulphate (7727-54-0);

4.

Sodium persulphate (7775-27-1); or

5.

Chemical preparations specially designed for etching and containing any of the chemicals included in points 1 to 4.

Note: This control does not control “chemical mixtures” containing one or more of the chemicals specified in this entry in which no individually specified chemical constitutes more than 10 % by the weight of the mixture.

d.

Copper foil with a minimum purity 95 % and of a thickness less than 100 μm;

e.

Polymeric substances and films thereof of less than 0,5 mm of thickness, as follows:

1.

Aromatic polyimides;

2.

Parylenes;

3.

Benzocyclobutenes (BCBs); or

4.

Polybenzoxazoles.

ex39219055

ex853400

ex28273920

ex28273985

ex283340

ex38249996

ex741011

ex741021

ex39191080

ex39199080

“Software” specially designed for the test, “development” or “production” of Printed Circuit Boards (PCBs). | N/A

Radio frequency systems and equipment not included in Regulation (EU) 2021/821, components and accessories, specially designed or modified to develop any of the following functions:

a.

Take control and command of UAVs.

b.

Deliberately and selectively interfere with, deny, inhibit, degrade or deceive radio frequency signals for the control and command of unmanned aircraft.

c.

Use the specific features of the radio frequency protocol used by drones to interfere with their operation.

ex851762

ex851771

ex851779

ex852550

ex852692

ex852910

ex85437090

Description | HS/CN code

Electronic computers and related equipment, and “electronic assemblies” and specially designed components therefor, rated for operation at an ambient temperature above 343 K (70 oC) | ex8471

“Digital computers”, including equipment of “signal processing” or “image enhancement”, having an “Adjusted Peak Performance” (“APP”) equal to or greater than 0,0128 Weighted TeraFLOPS (WT); | ex8471

Hybrid computers and “electronic assemblies” and specially designed components therefor containing analogue-to-digital converters having all of the following characteristics:

a.

32 channels or more; and

b.

A resolution of 14 bit (plus sign bit) or more with a conversion rate of 200000 Hz or more

ex8471

Description | HS/CN code

Telecommunications apparatus, devices or machines, for “aircraft” |

ex851762

ex851769

[Ref. Annex I to Regulation (EU) 2021/821] [Ref. Annex I to Regulation (EU) 2021/821] [Ref. Annex I to Regulation (EU) 2021/821]

Description | HS/CN code

Cameras for aerial survey | ex900630

Optical Sensors as follows:

a.

Image intensifier tubes and specially designed components therefor, as follows:

1.

Image intensifier tubes having all the following:

a.

A peak response in wavelength range exceeding 400 nm, but not exceeding 1050 nm;

b.

A microchannel plate for electron image amplification with a hole pitch (centre-to-centre spacing) of less than 25 μm; and

c.

Having any of the following:

1.

An S-20, S-25 or multialkali photocathode; or

2.

A GaAs or GaInAs photocathode;

2.

Specially designed microchannel plates having both of the following characteristics:

a.

15000 or more hollow tubes per plate; and

b.

Hole pitch (centre-to-centre spacing) of less than 25 μm

b.

Direct view imaging equipment operating in the visible or infrared spectrum, incorporating image intensifier tubes having the characteristics of the image intensifier tube included in this control.

ex852990

ex854239

ex900691

ex901380

ex902580

ex902590

ex902680

ex902690

ex902750

ex903210

Night vision cameras | 852583

Cameras that meet the criteria of Note 3 to 6A003.b.4 |

ex852589

ex900630

Airborne laser rangefinders |

ex90132000

ex90138000

ex90139080

ex901510

ex901580

ex901590

ex90318020

ex90318080

ex90319000

ex90330090

“Primary cells” or batteries and components having an energy density of 150 Wh/kg or more at 293 K (20 oC)

1.

For the purposes of this control, “energy density” (Wh/kg) is calculated from the nominal voltage multiplied by the nominal capacity in ampere-hours (Ah) divided by the mass in kilograms. If the nominal capacity is not stated, energy density is calculated from the nominal voltage squared then multiplied by the discharge duration in hours divided by the discharge load in ohms and the mass in kilograms.

2.

For the purposes of this control, a “cell” is defined as an electrochemical device, which has positive and negative electrodes, an electrolyte, and is a source of electrical energy. It is the basic building block of a battery.

3.

For the purposes of this control, a “primary cell” is a “cell” that is not designed to be charged by any other source.

ex8506

Radar systems, equipment and major components, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor, as follows:

a.

Airborne radar equipment, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor;

b.

“Space-qualified” “laser” radar or Light Detection and Ranging (LIDAR) equipment specially designed for surveying or for meteorological observation;

c.

Millimeter wave enhanced vision radar imaging systems specially designed for rotary wing aircraft and having all of the following:

1.

Operates at a frequency of 94 GHz;

2.

An average output power of less than 20 mW;

3.

Radar beam width of 1 degree; and

4.

Operating range equal to or greater than 1500 m

ex852610

ex852990

ex901510

ex 90

“Magnetometers”, “Superconductive” electromagnetic sensors, and specially designed components therefor, as follows:

a.

“Magnetometers”, other than those specified in the CML or in Regulation (EU) 2021/821, having a “sensitivity” lower (better) than 1,0 nT (rms) per square root Hz

Technical Note: For the purposes of this control, “sensitivity” (noise level) is the root mean square of the device-limited noise floor which is the lowest signal that can be measured

b.

“Superconductive” electromagnetic sensors, components manufactured from “superconductive” materials:

1.

Designed for operation at temperatures below the “critical temperature” of at least one of their “superconductive” constituents (including Josephson effect devices or “superconductive” quantum interference devices (SQUIDS));

2.

Designed for sensing electromagnetic field variations at frequencies of 1 kHz or less; and

3.

Having any of the following characteristics:

a.

Incorporating thin-film SQUIDS with a minimum feature size of less than 2 μm and with associated input and output coupling circuits;

b.

Designed to operate with a magnetic field slew rate exceeding 1 x 106 magnetic flux quanta per second;

c.

Designed to function without magnetic shielding in the earth’s ambient magnetic field; or

d.

Having a temperature coefficient less (smaller) than 0,1 magnetic flux quantum/K

ex901580

ex903180

Gravity meters (gravimeters) designed or modified for ground use, other than those specified in the CML or in Regulation (EU) 2021/821, as follows:

a.

Having a static accuracy of less (better) than 100 μGal; or

b.

Being of the quartz element (Worden) type

ex901580

This article is long: the rest is at the official publication.