Regulation (EC) No 1272/2008 is amended as follows:
in Article 1(1), the following point is added:
‘(f) providing an obligation for downstream users, importers and distributors referred to in Article 45(1b) and (1c) to submit information relevant to an adequate emergency health response to appointed bodies in accordance with Annex VIII.’
;
in Article 2, the following points are added:
‘38. “acute toxicity estimates” means numeric values which are used to classify substances and mixtures in one of four acute toxicity hazard categories based on the oral, dermal or inhalation exposure route.’;
“data carrier” means a linear bar code symbol, a two-dimensional symbol or other automatic identification data capture medium that can be read by a device;
“refill” means an operation by which a consumer or a professional user fills packaging with a hazardous substance or mixture offered by a supplier in the course of a commercial activity, whether in return for payment or free of charge;
“refill station” means a place where a supplier offers to consumers or professional users hazardous substances or mixtures that can be acquired through refill, either manually or through automatic or semi-automatic equipment.;’
Article 4 is amended as follows:
paragraph 3 is replaced by the following:
‘3. If a substance is subject to harmonised classification and labelling in accordance with Title V, through an entry in Part 3 of Annex VI, that substance shall be classified in accordance with that entry, and a classification of that substance in accordance with Title II shall not be carried out for the hazard classes, differentiations, or forms or physical states covered by that entry.
The harmonised classification of that substance shall apply to all its forms or physical states unless an entry in Part 3 of Annex VI specifies that a harmonised classification applies to a specific form or physical state of that substance.
However, where the substance also falls within one or more hazard classes or differentiations or it is in a form or physical state not covered by an entry in Part 3 of Annex VI, its classification in accordance with Title II shall be carried out for those hazard classes, differentiations and forms or physical states.’
;
the following paragraph is added:
‘11. A substance or a mixture shall not be placed on the market unless a supplier established in the Union, which shall be identified on the label, in the course of an industrial or professional activity fulfils the requirements set out in this Regulation with regard to the substances or mixture in question’
;
in Article 5, is amended as follows:
in paragraph 1, the following point is inserted:
‘ca) data obtained from new approach methodologies;’
;
the following paragraphs are added:
‘3. A substance containing more than one constituent, in the form of an individual constituent, an identified impurity or an additive, for which relevant information referred to in paragraph 1 is available, shall be evaluated using the available information on those known constituents as well as on the substance itself.
For the evaluation of a substance containing more than one constituent pursuant to Chapter 2 in relation to the “germ cell mutagenicity”, “carcinogenicity”, “reproductive toxicity”, “endocrine disruption for human health” and “endocrine disruption for the environment” hazard classes referred to in sections 3.5, 3.6, 3.7, 3.11 and 4.2 of Annex I, the manufacturer, importer and downstream user shall use the relevant available information referred to in paragraph 1 for each of the known constituents.
Relevant available information on a substance containing more than one constituent itself shall be taken into account where one of the following conditions is met:
the information demonstrates germ cell mutagenic, carcinogenic, or toxic to reproduction properties, or endocrine disruption for human health or the environment;
the information supports the conclusions based on the relevant available information on the constituents in the substance.
Relevant available information on the substance containing more than one constituent itself demonstrating an absence of the properties referred to in point (a) or less severe properties shall not override the relevant available information on the constituents in the substance.
For the evaluation of a substance containing more than one constituent pursuant to Chapter 2 of this Title in relation to the biodegradation, persistence, mobility and bioaccumulation properties within the “hazardous to the aquatic environment”, “persistent, bioaccumulative and toxic or very persistent, very bioaccumulative properties” and “persistent, mobile and toxic or very persistent, very mobile properties” hazard classes referred to in sections 4.1.2.8, 4.1.2.9, 4.3.2.3.1, 4.3.2.3.2, 4.4.2.3.1 and 4.4.2.3.2 of Annex I, the manufacturer, importer and downstream user shall use the relevant available information referred to in paragraph 1 for each of the known constituents in the substance.
Relevant available information on a substance containing more than one constituent itself shall be taken into account where one of the following conditions is met:
the information demonstrates persistence, mobility and bioaccumulation properties or a lack of degradation.
the information supports the conclusions based on the relevant available information on the constituents in the substance.
Relevant available information on the substance containing more than one constituent itself demonstrating an absence of the properties referred to in point (a) or less severe properties shall not override the relevant available information on the constituents in the substance.
Paragraphs 4 and 5 shall not apply to substances containing more than one constituent which are extracted from plants or plant parts and which are not chemically modified as defined in Article 3, point (40), of Regulation (EC) No 1907/2006.
For the purpose of paragraph 6, “plants” refers to living or dead organisms from the kingdoms Plantae and Fungi, and includes algae, lichens and yeasts.
For certain substances containing more than one constituent that are not covered by paragraph 6, where the Commission receives evidence that the rules set out in paragraphs 4 or 5 might not be suitable for certain substances containing more than one constituent, the Commission may request the Agency to evaluate the available data.
The Commission is empowered to adopt delegated acts in accordance with Article 53a to amend Annex I by creating a new section and by including and modifying, in that section, the derogations from paragraph 4 or 5 on classification of substances containing more than one constituent. For those delegated acts, the Commission shall take into account scientific evidence, advances in knowledge, and the opinion of the Agency when available, to appropriately classify substances containing more than one constituent provided that a high level of protection of human health and the environment is ensured.’
;
in Article 6 is amended as follows:
in paragraph 1, the following point is inserted:
‘ca) data obtained from new approach methodologies;’
;
paragraphs 3 and 4 are replaced by the following:
‘3. For the evaluation of mixtures pursuant to chapter 2 of this Title in relation to the “germ cell mutagenicity”, “carcinogenicity”, “reproductive toxicity”, “endocrine disruption for human health” and “endocrine disruption for the environment” hazard classes referred to in sections 3.5.3.1, 3.6.3.1, 3.7.3.1, 3.11.3.1 and 4.2.3.1 of Annex I, the manufacturer, importer and downstream user shall only use the relevant available information referred to in paragraph 1 for the substances in the mixture and not for the mixture itself.
Where the available test data on the mixture itself demonstrate germ cell mutagenic, carcinogenic or toxic to reproduction properties, or endocrine disruption for human health or the environment which have not been identified from the relevant available information on the individual substance referred to in the first subparagraph, those data shall also be taken into account for the purposes of the evaluation of the mixture referred to in the first subparagraph.
For the evaluation of mixtures pursuant to Chapter 2 of this Title in relation to the biodegradation, persistency, mobility and bioaccumulation properties within the “hazardous to the aquatic environment”, “persistent, bioaccumulative and toxic or very persistent, very bioaccumulative properties” and “persistent, mobile and toxic or very persistent, very mobile properties” hazard classes referred to in sections 4.1.2.8, 4.1.2.9, 4.3.2.3.1, 4.3.2.3.2, 4.4.2.3.1 and 4.4.2.3.2 of Annex I, the manufacturer, importer and downstream user shall only use the relevant available information referred to in paragraph 1 for the substances in the mixture and not for the mixture itself.’
;
in Article 9, paragraphs 3 and 4 are replaced by the following:
‘3. Where the criteria referred to in paragraph 1 cannot be applied directly to available identified information, manufacturers, importers and downstream users shall carry out an evaluation by applying a weight of evidence determination using expert judgement in accordance with section 1.1.1 of Annex I to this Regulation, weighing all available information having a bearing on the determination of the hazards of the substance or the mixture, and in accordance with section 1.2 of Annex XI to Regulation (EC) No 1907/2006.
When evaluating hazard information for mixtures, manufacturers, importers and downstream users shall, where test data for the mixture itself are inadequate or unavailable, apply the bridging principles referred to in section 1.1.3 of Annex I and in each section of Parts 3 and 4 of that Annex for the purposes of the evaluation.
If more than one similar tested mixture is available when applying the bridging principles, manufacturers, importers and downstream users shall apply a weight of evidence determination using expert judgement in accordance with section 1.1.1 of Annex I to this Regulation, weighing all available information having a bearing on the determination of the hazards of the mixture, and in accordance with section 1.2 of Annex XI to Regulation (EC) No 1907/2006, to select the most suitable similar tested mixtures in accordance with Article 6(5) of this Regulation for their decision on classification.
When evaluating the hazard information for mixtures, manufacturers, importers and downstream users shall, where that information does not permit the application of the bridging principles in accordance with the first and second subparagraphs, evaluate the information by applying the other method or methods set out in Parts 3 and 4 of Annex I.’
;
Article 10 is replaced by the following:
Specific concentration limits and generic concentration limits are limits assigned to a substance indicating a threshold at or above which the presence of that substance in another substance or in a mixture as an identified impurity, additive or individual constituent leads to the classification of the substance or mixture as hazardous.
Specific concentration limits shall be set by the manufacturer, importer or downstream user where adequate and reliable scientific information shows that the hazard of a substance is evident when that substance is present at a level below the concentrations set for any hazard class in Part 2 of Annex I or below the generic concentration limits set for any hazard class in Parts 3, 4 and 5 of Annex I.
Manufacturers, importers and downstream users may set a specific concentration limit for a substance in exceptional circumstances where adequate, reliable and conclusive scientific information shows that the hazard of a substance classified as hazardous is not evident at a level above the concentrations set for the relevant hazard class in Part 2 of Annex I or above the generic concentration limits set for the relevant hazard class in Parts 3, 4 and 5 of that Annex.
Manufacturers, importers and downstream users shall establish M-factors for substances classified as hazardous to the aquatic environment, acute category 1 or chronic category 1.
Manufacturers, importers and downstream users shall establish acute toxicity estimates for substances classified as acutely toxic for human health.
By way of derogation from paragraph 1, second and third subparagraphs, specific concentration limits shall not be set for harmonised hazard classes or differentiations for substances included in Part 3 of Annex VI.
By way of derogation from paragraph 2, M-factors shall not be established for harmonised hazard classes or differentiations for substances included in Part 3 of Annex VI for which an M-factor is given in that Part.
However, where an M-factor is not given in Part 3 of Annex VI for substances classified as hazardous to the aquatic environment, acute category 1 or chronic category 1, the manufacturer, importer or downstream user shall set an M-factor based on available data for the substance. When a mixture including the substance is classified by the manufacturer, importer or downstream user using the summation method, that M-factor shall be used.
By way of derogation from paragraph 3, acute toxicity estimates shall not be established for harmonised hazard classes or differentiations for substances included in Part 3 of Annex VI for which an acute toxicity estimate is given in that Part.
When setting the specific concentration limit, M-factor or acute toxicity estimate, manufacturers, importers and downstream users shall take into account any specific concentration limits, M-factors or acute toxicity estimate for that substance which have been included in the classification and labelling inventory.
Specific concentration limits set in accordance with paragraph 1, second and third subparagraphs, shall take precedence over the concentration limits set out in the relevant sections of Part 2 of Annex I or the generic concentration limits for classification set out in the relevant sections of Parts 3, 4 and 5 of that Annex.
The Agency shall provide further guidance for the application of paragraphs 1, 2 and 3.
Where a mixture contains a substance which is classified as hazardous solely due to the presence of an identified impurity, additive or individual constituent, the concentration limits referred to in paragraph 1, second and third subparagraphs, shall apply to the concentration of that identified impurity, additive or individual constituent in the mixture.
Where a mixture contains another mixture, the concentration limits referred to in paragraph 1, second and third subparagraphs, shall apply to the concentration of the identified impurity, additive or individual constituent referred to in paragraph 10 in the resulting final mixture.’
;
Article 13 is replaced by the following:
If the evaluation undertaken pursuant to Articles 9 and 12 shows that the hazards associated with the substance or mixture meet the criteria for classification in one or more hazard classes or differentiations in Parts 2 to 5 of Annex I, manufacturers, importers and downstream users shall classify the substance or mixture or, if scientifically justified, specific forms or physical states thereof, in relation to the relevant hazard class or classes or differentiations by assigning the following:
one or more hazard categories for each relevant hazard class or differentiation;
subject to Article 21, one or more hazard statements corresponding to each hazard category assigned in accordance with point (a).’
;
in Article 18(3), point (b) is replaced by the following:
‘(b) the identity of all substances in the mixture that contribute to the classification of the mixture as regards acute toxicity, skin corrosion or serious eye damage, germ cell mutagenicity, carcinogenicity, reproductive toxicity, respiratory or skin sensitisation, specific target organ toxicity, aspiration hazard, persistent, bioaccumulative and toxic, very persistent and very bioaccumulative, persistent, mobile and toxic, very persistent and very mobile properties, or endocrine disruption for human health or the environment.’
;
in Article 23, the following point is added:
‘(g) ammunition as defined in Article 1(1), point (3), of Directive (EU) 2021/555 of the European Parliament and of the Council [Directive (EU) 2021/555 of the European Parliament and of the Council of 24 March 2021 on control of the acquisition and possession of weapons (OJ L 115, 6.4.2021, p. 1).’;] unless it is an article that falls within the scope of Article 4(8) of this Regulation.
in Article 24(2), the second subparagraph is replaced by the following:
‘The level of the fees shall be determined by the Commission by means of implementing acts. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 54(2) of this Regulation.’
;
Article 25 is amended as follows:
paragraph 3 is replaced by the following:
‘3. The supplier may include supplemental information in the section for supplemental information on the label other than that referred to in paragraphs 1, 2 and 6 to 9, provided that that information does not make it more difficult to identify the label elements referred to in Article 17(1), points (a) to (g), and that it provides further details and does not contradict or cast doubt on the validity of the information specified by those elements.’
;
in paragraph 6, the first subparagraph is replaced by the following:
‘The special labelling rules set out in Part 2 of Annex II shall apply to mixtures containing substances referred to in Part 2 of that Annex.’
;
the following paragraph is added:
‘9. Label elements resulting from requirements set out in other Union acts shall be placed in the section for supplemental information on the label.’
;
Article 29 is amended as follows:
paragraph 1 is replaced by the following:
‘1. Where the packaging of a substance or a mixture is either in such a shape or form or is so small that it is impossible to meet the requirements laid down in Article 31 for a label in the languages of the Member State in which the substance or mixture is placed on the market, the label elements set out in Article 17(1), shall be provided in accordance with section 1.5.1 of Annex I.’
;
paragraph 3 is replaced by the following:
‘3. Where a hazardous substance or mixture referred to in Part 5 of Annex II is supplied to the general public without packaging, the labelling information shall be provided in accordance with the provision referring to that substance or mixture in that Part.’
;
the following paragraph is added:
‘4b. By way of derogation from Article 17(1), the labelling requirement set out in that Article shall not apply to packaging of ammunition that is intended for use by defence forces, where labelling in accordance with that requirement would constitute an unacceptable security risk for the ammunition or for the military or non-military staff, and sufficient camouflaging cannot be ensured.
In the case referred to in the first subparagraph of this paragraph, manufacturers, importers and downstream users shall provide to the defence forces the safety data sheet or, if no safety data sheet is required, a copy of the label elements as provided for in Article 17.’
;
Article 30 is replaced by the following:
In the event of a change regarding the classification or labelling of a substance or a mixture, which results in the addition of a new hazard class or in a more severe classification, or which requires new supplemental information on the label in accordance with Article 25, the supplier of that substance or that mixture shall ensure that the label is updated without undue delay and in any event no later than 6 months after the results of the new evaluation referred to in Article 15(4) are obtained by, or communicated to, that supplier.
Where a change regarding the classification or labelling of a substance or a mixture, other than those referred to in paragraph 1 of this Article, is required, the supplier of that substance or that mixture shall ensure that the label is updated without undue delay and in any event no later than 18 months after the results of the new evaluation referred to in Article 15(4) are obtained by, or communicated to, that supplier.
Paragraphs 1 and 2 shall not apply where a change regarding the classification and labelling of a substance or a mixture was triggered by a harmonised classification and labelling of a substance set out in a delegated act adopted pursuant to Article 37(5) or by a provision set out in a delegated act adopted pursuant to Article 53(1). In such cases, the supplier shall ensure that the label is updated by the date set out in the respective delegated act.
The supplier of a substance or mixture that falls within the scope of Regulation (EC) No 1107/2009 or Regulation (EU) No 528/2012 shall update the label in accordance with those Regulations’
;
Article 31 is amended as follows:
paragraph 1 is replaced by the following:
‘1. Labels shall be firmly affixed to one or more surfaces of the packaging immediately containing the substance or mixture and shall be readable horizontally when the package is set down normally. The label may be presented in the form of a fold-out label.’
;
the following paragraphs are inserted:
‘1a. Where the label is presented in the form of a fold-out label, the label elements referred to in Article 17(1) shall be presented in accordance with section 1.2.1.6 of Annex I.
Where a digital label as provided for in Article 34a(1) is used, a data carrier linking to that digital label shall be firmly affixed or printed on the physical label or on the packaging next to the label in such a way that it can be processed automatically by digital devices that are widely used.
Where label elements are provided on a digital label only pursuant to Article 34a(2), the data carrier shall be accompanied by the statement “More hazard information available online” or by a similar indication.’
;
paragraph 3 is replaced by the following:
‘3. The label elements referred to in Article 17(1) shall be clearly and indelibly marked. They shall stand out clearly from the background and they shall be of such a size and be spaced in such a way as to be easily read. They shall be formatted in accordance with section 1.2.1 of Annex I.’
;
in Article 32, paragraph 6 is deleted;
in Title III, the following chapter is added:
‘Chapter 3
Labelling formats