The biodegradability of polymers in mulch films referred to in section CMC 9, point 1a, shall be demonstrated in the following two environmental compartments:
compartment 1: soil;
compartment 2: fresh, estuarine or marine water, or water sediment interface.
The polymer shall achieve:
in compartment 1:
ultimate degradation of at least 90 % relative to the degradation of the reference material within 24 months plus the functionality period of the product as indicated on the label; or
mineralisation of at least 90 %, measured as evolved CO2, over a maximum of 24 months plus the functionality period of the product as indicated on the label:
in compartment 2:
ultimate degradation of at least 30 % relative to the degradation of the reference material in 12 months; or
ultimate degradation of at least 90 % relative to the degradation of the reference material in 24 months plus the functionality period of the product as indicated on the label.
To demonstrate the biodegradability criteria in point 2(a), one of the following test methods shall be used:
EN ISO 17556:2019. Plastics – Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved;
ISO/CD 23517:2021. Plastics – Soil biodegradable materials for mulch films for use in agriculture and horticulture;
ASTM D5988-96:2018. Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials.
When there is no phase transition (glass transition or melting transition) between 25 °C and 37 °C, the temperature during testing in accordance with points 3(a), (b) and (c) may be adjusted at 37 oC.
In such a case, the relevant criterion in point 2(a) shall be considered as being demonstrated if the polymer achieves:
at least 45 % ultimate degradation or mineralisation as referred to in point 2(a) in a separate test at 25 °C in 10 months, whereby degradation or mineralisation shall be progressing, and the plateau phase shall not have been reached, unless the degradation or mineralisation is at least 90 %; and
one of the following criteria:
ultimate degradation of at least 90 % relative to degradation of the reference material within 10 months plus the functionality period of the product as indicated on the label; or
mineralisation of at least 90 %, measured as evolved CO2, over a maximum of 10 months plus the functionality period of the product as indicated on the label.
To demonstrate the biodegradability criteria in point 2(b), one of the following test methods shall be used:
EN/ISO 14851:2019 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by measuring the oxygen demand in a closed respirometer;
EN/ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide;
ASTM D6691:2018 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum;
EN/ISO 19679:2020 Plastics – Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface – Method by analysis of evolved carbon dioxide;
EN/ISO 18830:2017 Plastics – Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface – Method by measuring the oxygen demand in closed respirometer.
Polymers may be tested in any of the following forms:
in the form of the film placed on the market;
in a powder form of the milled film.
The following materials may be used as reference materials:
positive controls: biodegradable materials such as micro-crystalline cellulose powder, ashless cellulose filters or poly-β-hydroxybutyrate;
negative controls: non-biodegradable polymers such as polyethylene or polystyrene.