Recital 13, Regulation (EU) 2024/1781

In forcesince 13 Jun 2024

In order to create an effective and future-proof harmonised regulatory framework, it is necessary to provide for the setting of ecodesign requirements for all physical goods placed on the market or put into service, including components, such as tyres, and intermediate products. Digital content that is an integral part of a physical product is to be included in the scope. This should allow the Commission to take into account the broadest range of products possible when prioritising the setting of ecodesign requirements and thereby maximise their effectiveness. Where needed, specific exemptions should be provided for when setting ecodesign requirements, in particular where ecodesign requirements are not necessary to contribute to the environmental sustainability of specific products, or, for example, for products with a particular use, products with a particular purpose that could not be fulfilled when complying with ecodesign requirements or products produced in very small quantities, or taking into account the specificity and size of the product’s market. In addition, this Regulation should not apply to products for which it is already clear that ecodesign requirements would not be suitable or where other frameworks provide for the setting of such requirements. This should be the case for food and feed as defined in Regulation (EC) No 178/2002 of the European Parliament and of the Council [Regulation (EC) No 178/2002 of the European Parliament and of the Council of 28 January 2002 laying down the general principles and requirements of food law, establishing the European Food Safety Authority and laying down procedures in matters of food safety (OJ L 31, 1.2.2002, p. 1).], for medicinal products as defined in Directive 2001/83/EC of the European Parliament and of the Council [Directive 2001/83/EC of the European Parliament and of the Council of 6 November 2001 on the Community code relating to medicinal products for human use (OJ L 311, 28.11.2001, p. 67).], for veterinary medicinal products as defined in Regulation (EU) 2019/6 of the European Parliament and of the Council [Regulation (EU) 2019/6 of the European Parliament and of the Council of 11 December 2018 on veterinary medicinal products and repealing Directive 2001/82/EC (OJ L 4, 7.1.2019, p. 43).], for living plants, animals and micro-organisms, for products of human origin, for products of plants and animals relating directly to their future reproduction, and for vehicles as referred to in Article 2(1) of Regulation (EU) No 167/2013 of the European Parliament and of the Council [Regulation (EU) No 167/2013 of the European Parliament and of the Council of 5 February 2013 on the approval and market surveillance of agricultural and forestry vehicles (OJ L 60, 2.3.2013, p. 1).], in Article 2(1) of Regulation (EU) No 168/2013 of the European Parliament and of the Council [Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles (OJ L 60, 2.3.2013, p. 52).] and in Article 2(1) of Regulation (EU) 2018/858 of the European Parliament and of the Council [Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, amending Regulations (EC) No 715/2007 and (EC) No 595/2009 and repealing Directive 2007/46/EC (OJ L 151, 14.6.2018, p. 1).], in respect of those product aspects for which requirements are set under sector-specific Union legislative acts applicable to those vehicles. Those vehicles are subject to several product-specific requirements and different harmonised type-approval systems under legal Union acts, such as Directives 2000/53/EC [Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 on end-of life vehicles (OJ L 269, 21.10.2000, p. 34).] and 2005/64/EC [Directive 2005/64/EC of the European Parliament and of the Council of 26 October 2005 on the type-approval of motor vehicles with regard to their reusability, recyclability and recoverability and amending Council Directive 70/156/EEC (OJ L 310, 25.11.2005, p. 10).] of the European Parliament and of the Council and Regulation (EU) 2018/858. Additional harmonised requirements for vehicles should be limited to aspects that are not currently addressed, for example environmental requirements for tyres. E-bikes and e-scooters should, however, not be excluded from the scope of this Regulation.