ANNEX I, Regulation (EU) 2024/1721

In force

Information document No … relating to the EU type-approval of a type of vehicle with regard to the intelligent speed assistance (ISA) system.

The following information shall be supplied in triplicate and include a list of contents. Any drawings or pictures shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.

If the systems referred to in this information document have electronic controls, information concerning their performance shall be supplied.

0.1. Make (trade name of manufacturer):

0.2. Type:

0.2.1. Commercial name(s) (if available):

0.3. Means of identification of type, if marked on the vehicle/component/separate technical unit [Delete where not applicable.]:

0.3.1. Location of that marking:

0.4. Category of vehicle:

0.5. Company name and address of manufacturer:

0.8. Name(s) and address(es) of assembly plant(s):

0.9. Name and address of the manufacturer’s representative (if any):

1.1. Photographs and/or drawings of a representative vehicle/component/separate technical unit:

4.8. Speedometer and odometer

Speedometer

4.8.1. Method of operation and description of drive mechanism:

4.8.2. Instrument constant:

4.8.3. Tolerance of the measuring mechanism pursuant to paragraph 2.2.3 of UN Regulation No 39 of the Economic Commission for Europe of the United Nations (UN/ECE) [UN Regulation No 39 of the Economic Commission for Europe of the United Nations (UN/ECE) – Uniform provisions concerning the approval of vehicles with regard to the speedometer and odometer equipment including its installation (OJ L 302, 28.11.2018, p. 106, ELI: http://data.europa.eu/eli/reg/2018/1857/oj).]:

4.8.4. Overall transmission ratio pursuant to paragraph 2.2.2 of UN Regulation No 39 or equivalent data:

4.8.5. Diagram of the speedometer scale or other forms of display:

Odometer

4.8.6. The technical constant of odometer pursuant to paragraph 2.2.4 of UN Regulation No 39:

4.8.7. The number of numerals:

4.9. Tachograph: yes/no(1)

4.9.1. Approval mark:

4.10. Differential lock: yes/no/optional(1)

6.6. Tyres and wheels

6.6.2. Upper and lower limits of rolling radii

6.6.2.1. Axle 1: … mm

6.6.2.2. Axle 2: … mm

6.6.2.3. Axle 3: …mm

6.6.2.4. Axle 4: …mm

6.6.3. Tyre pressure(s) as recommended by the vehicle manufacturer: … kPa

9.5. Windscreen and other windows

9.5.1. Windscreen

9.5.1.1. Materials used:

9.5.1.2. Method of mounting:

9.5.1.3. Angle of inclination:

9.5.1.4. Number(s) of the type-approval certificate(s):

9.5.1.5. Windscreen accessories and the position in which they are fitted together with a brief description of any electrical/electronic components involved:

12.6. Speed limitation devices

12.6.1. Manufacturer(s):

12.6.2. Type(s):

12.6.3. Number(s) of the type-approval certificate(s), if available:

12.6.4. Speed or range of speeds at which the speed limitation may be set: …… km/h

12.6.5. Intelligent speed assistance (ISA) system

12.6.5.2. Speed limit information function (SLIF):

12.6.5.2.1. Detailed description of the SLIF interface:

12.6.5.2.2. Perceived speed limit determination methodology and technology:

12.6.5.3. Speed limit warning function (SLWF):

12.6.5.3.1. Detailed description of the SLWF feedback mechanisms:

12.6.5.3.2. Detailed description of the SLWF visual warning, if applicable:

12.6.5.4. Detailed description of the speed control function (SCF):

12.6.5.5. Type-approval number of the ISA system as separate technical unit, if applicable:

12.6.6. Means to enable a periodic technical inspection with regard to the ISA system:

Communication concerning granting/extension/refusal/withdrawal [Delete where not applicable.] of type-approval of a type of vehicle with regard to its intelligent speed assistance (ISA) system in accordance with the requirements laid down in Commission Delegated Regulation (EU) 2021/1958 [Commission Delegated Regulation (EU) 2021/1958 of 23 June 2021 supplementing Regulation (EU) 2019/2144 of the European Parliament and of the Council by laying down detailed rules concerning the specific test procedures and technical requirements for the type-approval of motor vehicles with regard to their intelligent speed assistance systems and for the type-approval of those systems as separate technical units and amending Annex II to that Regulation (OJ L 409, 17.11.2021, p. 1, ELI: http://data.europa.eu/eli/reg_del/2021/1958/oj).], as last amended by Regulation (EU) No …/…

Number of the EU type-approval certificate:

Reason for extension/refusal/withdrawal:

0.1. Make (trade name of manufacturer):

0.2. Type:

0.2.1. Commercial name(s) (if available):

0.3. Means of identification of type, if marked on the vehicle:

0.3.1. Location of that marking:

0.4. Category of vehicle:

0.5. Name and address of manufacturer:

0.8. Name(s) and address(es) of assembly plant(s):

0.9. Name and address of the manufacturer’s representative (if any):

1.

Additional information (where applicable): see Addendum.

2.

Technical service responsible for carrying out the tests:

3.

Date of test report:

4.

Number of test report:

5.

Remarks (if any): see Addendum.

6.

Place:

7.

Date:

8.

Signature:

Communication concerning granting/extension/refusal/withdrawal [Delete where not applicable.] of type-approval of a type of intelligent speed assistance (ISA) system in accordance with the requirements laid down in Commission Delegated Regulation (EU) 2021/1958 [Commission Delegated Regulation (EU) 2021/1958 of 23 June 2021 supplementing Regulation (EU) 2019/2144 of the European Parliament and of the Council by laying down detailed rules concerning the specific test procedures and technical requirements for the type-approval of motor vehicles with regard to their intelligent speed assistance systems and for the type-approval of those systems as separate technical units and amending Annex II to that Regulation (OJ L 409, 17.11.2021, p. 1, ELI: http://data.europa.eu/eli/reg_del/2021/1958/oj).], as last amended by Regulation (EU) No …/…

Number of the EU type-approval certificate:

Reason for extension/refusal/withdrawal:

0.1. Make (trade name of manufacturer):

0.2. Type:

0.2.1. Commercial name(s) (if available):

0.3. Means of identification of type, if marked on the vehicle:

0.3.1. Location of that marking:

0.4. Category of vehicle:

0.5. Name and address of manufacturer:

0.8. Name(s) and address(es) of assembly plant(s):

0.9. Name and address of the manufacturer’s representative (if any):

1.

Additional information (where applicable): see Addendum.

2.

Technical service responsible for carrying out the tests:

3.

Date of test report:

4.

Number of test report:

5.

Remarks (if any): see Addendum.

6.

Place:

7.

Date:

8.

Signature: