2 ‘ANNEX I Average specific CO2 emissions, specific CO2 emissions targets and excess CO2 emissions, Regulation (EU) 2024/1610

In forcesince 14 May 2024

1.1.1. For heavy-duty vehicles of category N, the vehicle sub-group sg is defined as follows:

[For the calculation of vehicle shares and average specific CO2 emissions of manufacturers of reporting periods of the years 2030 to 2034 in accordance with points 2.4 and 2.7, respectively, zero-emission vocational vehicles of category N shall be attributed as follows:]

Vehicle group pursuant to Annex I to Regulation (EU) 2017/2400 | Cab type | Engine power | Operational range (OR) | Vehicle sub-group (sg) attributed for the purposes of this Regulation

Vehicles other than vocational vehicles | Vocational vehicles

53 and zero-emission heavy-duty vehicles in 51 | All | 53 | 53v

54 and zero-emission heavy-duty vehicles in 52 | All | 54 | —

1s | All | 1s | 1sv

1 | All | 1 | 1v

2 | All | 2 | 2v

3 | All | 3 | 3v

4 | All | <170 kW | All | 4-UD | 4v

Day cab | ≥170 kW | All | 4-RD

Sleeper cab | ≥170 kW and <265 kW

Sleeper cab | ≥265 kW | <350 km

Sleeper cab | ≥265 kW | ≥350 km | 4-LH

9 | Day cab | All | All | 9-RD | 9v

Sleeper cab | All | <350 km

Sleeper cab | All | ≥350 km | 9-LH

5 | Day cab | All | All | 5-RD | 5v

Sleeper cab | <265 kW

Sleeper cab | ≥265 kW | <350 km

Sleeper cab | ≥265 kW | ≥350 km | 5-LH

10 | Day cab | All | All | 10-RD | 10v

Sleeper cab | All | <350 km

Sleeper cab | All | ≥350 km | 10-LH

11 | All | 11 | 11v

12 | All | 12 | 12v

16 | All | 16 | 16v

Zero-emission vocational vehicle in vehicle sub-group | Attributed to vehicle sub-group

53v | 53

1sv | 1s

1v | 1

2v | 2

3v | 3

4v | 4-UD

5v | 5-RD

9v | 9-RD

10v | 10-RD

11v | 11

12v | 12

16v | 16

“Sleeper cab” means a type of cab that has a compartment behind the driver’s seat intended to be used for sleeping as reported pursuant to Articles 13a and 13b.

“Day cab” means a type of cab that is not a sleeper cab.

Where a new heavy-duty vehicle is attributed to vehicle sub-group 4-UD, but data on the CO2 emissions in g/km are not available for the UDL or UDR mission profiles as defined in point 1.4, the new heavy-duty vehicle shall be attributed to vehicle sub-group 4-RD.

“Operational range” means the distance a heavy-duty vehicle can travel under long haul transport conditions without being re-charged or re-filled, as provided for in point 1.3.

1.1.2. For heavy-duty vehicles of category M, the vehicle sub-group sg is defined as follows:

Vehicle group pursuant to Annex I to Regulation (EU) 2017/2400 | Vehicle sub-group (sg) attributed for the purposes of this Regulation

31a, 31d | 31-LF

31b1 | 31-L1

31b2 | 31-L2

31c, 31e | 31-DD

32a, 32b | 32-C2

32c, 32d | 32-C3

32e, 32f | 32-DD

33a, 33d, 37a, 37d | 33-LF

33b1, 37b1 | 33-L1

33b2, 37b2 | 33-L2

33c, 33e, 37c, 37e | 33-DD

34a, 34b, 36a, 36b, 38a, 38b, 40a, 40b | 34-C2

34c, 34d, 36c, 36d, 38c, 38d, 40c, 40d | 34-C3

34e, 34f, 36e, 36f, 38e, 38f, 40e, 40f | 34-DD

35a, 35b1, 35b2, 35c | 35-FE

39a, 39b1, 39b2, 39c | 39-FE

1.1.3. For heavy-duty vehicles of category O, the vehicle sub-group sg is defined as follows:

Vehicle groups defined in Annex I to Implementing Regulation (EU) 2022/1362 | Vehicle sub-group (sg) attributed for the purposes of this Regulation

All groups provided for in Table 1 with one, two or three axles | Same as provided in the column “vehicle group” of the tables in Annex I to Implementing Regulation (EU) 2022/1362.

All groups provided in Table 4 with two or three axles

All groups provided for in Table 6

1.2. Vocational vehicles are defined by the following criteria:

Vehicle category | Chassis configuration | Criteria for vocational vehicles

N | Rigid |

One of the following digits, as listed in Appendix 2 of Annex I to Regulation (EU) 2018/858, is used to supplement the code for bodywork indicated in entry 38 of the certificate of conformity:

09, 10, 15, 16, 18, 19, 20, 23, 24, 25, 26, 27, 28 or 31;

Tractor | Maximum speed not exceeding 79 km/h

1.3. Operational ranges for the purposes of this Regulation are set as follows:

Powertrain technology | Operational range (OR)

Heavy-duty vehicles drawing energy for the purpose of mechanical propulsion only from an electrical energy or power storage device | OR = actual charge depleting range as provided for by point 2.4.1 of Part I of Annex IV to Regulation (EU) 2017/2400 for the LHR mission profile

Other technologies | OR>350 km

RDL | Regional delivery payload low

RDR | Regional delivery payload representative

LHL | Long-haul payload low

LHR | Long-haul payload representative

UDL | Urban delivery payload low

UDR | Urban delivery payload representative

REL | Regional delivery (EMS) payload low

RER | Regional delivery (EMS) payload representative

LEL | Long haul (EMS) payload low

LER | Long haul (EMS) payload representative

MUL | Municipal utility payload low

MUR | Municipal utility payload representative

COL | Construction payload low

COR | Construction payload representative

HPL | Heavy urban, passenger transport, low load

HPR | Heavy urban, passenger transport, representative load

UPL | Urban, passenger transport, low load

UPR | Urban, passenger transport, representative load

SPL | Sub-urban, passenger transport, low load

SPR | Sub-urban, passenger transport, representative load

IPL | Inter-urban, passenger transport, low load

IPR | Inter-urban, passenger transport, representative load

CPL | Coach, passenger transport, low load

CPR | Coach, passenger transport, representative load

The specific CO2 emissions in g/km of a new heavy-duty vehicle v attributed to a vehicle sub-group sg or of its primary vehicle shall be calculated as follows:

Where,

∑mp

is the sum of all mission profiles mp listed in point 1.4;

sg

is the vehicle sub-group to which the new heavy-duty vehicle v has been attributed according to point 1 of this Annex;

Wsg,mp

is the mission profile weight specified in points 2.1.1 to 2.1.3;

CO2v,mp

is the CO2 emissions in g/km of the new heavy-duty vehicle v determined for a mission profile mp, reported pursuant to Articles 13a and 13b and normalised pursuant to Annex III;

CO2pv,mp

is the CO2 emissions in g/km of the primary vehicle of the new heavy-duty vehicle v, determined for a mission profile mp, and for the chassis configuration (low/high floor, number of decks) applicable to its vehicle sub-group sg, reported pursuant to Articles 13a and 13b and normalised pursuant to Annex III;

For zero-emission heavy-duty motor vehicles, the values of CO2v,mp and CO2pv,mp shall be set to 0.

[See definitions in point 1.1] [See definitions in point 1.4]

Vehicle sub-group

(sg)

Mission profile (mp)

RDL | RDR | LHL | LHR | UDL | UDR | REL, RER, LEL, LER | MUL | MUR | COL | COR

53, 53v | 0,25 | 0,25 | 0 | 0 | 0,25 | 0,25 | 0 | 0 | 0 | 0 | 0

54 | 0,25 | 0,25 | 0 | 0 | 0,25 | 0,25 | 0 | 0 | 0 | 0 | 0

1s, 1sv | 0,1 | 0,3 | 0 | 0 | 0,18 | 0,42 | 0 | 0 | 0 | 0 | 0

1, 1v | 0,1 | 0,3 | 0 | 0 | 0,18 | 0,42 | 0 | 0 | 0 | 0 | 0

2, 2v | 0,125 | 0,375 | 0 | 0 | 0,15 | 0,35 | 0 | 0 | 0 | 0 | 0

3, 3v | 0,125 | 0,375 | 0 | 0 | 0,15 | 0,35 | 0 | 0 | 0 | 0 | 0

4-UD | 0 | 0 | 0 | 0 | 0,5 | 0,5 | 0 | 0 | 0 | 0 | 0

4-RD | 0,45 | 0,45 | 0,05 | 0,05 | 0 | 0 | 0 | 0 | 0 | 0 | 0

4-LH | 0,05 | 0,05 | 0,45 | 0,45 | 0 | 0 | 0 | 0 | 0 | 0 | 0

4v | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0,25 | 0,25 | 0,25 | 0,25

5-RD | 0,27 | 0,63 | 0,03 | 0,07 | 0 | 0 | 0 | 0 | 0 | 0 | 0

5-LH | 0,03 | 0,07 | 0,27 | 0,63 | 0 | 0 | 0 | 0 | 0 | 0 | 0

5v | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0,5 | 0,5

9-RD | 0,27 | 0,63 | 0,03 | 0,07 | 0 | 0 | 0 | 0 | 0 | 0 | 0

9-LH | 0,03 | 0,07 | 0,27 | 0,63 | 0 | 0 | 0 | 0 | 0 | 0 | 0

9v | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0,25 | 0,25 | 0,25 | 0,25

10-RD | 0,27 | 0,63 | 0,03 | 0,07 | 0 | 0 | 0 | 0 | 0 | 0 | 0

10-LH | 0,03 | 0,07 | 0,27 | 0,63 | 0 | 0 | 0 | 0 | 0 | 0 | 0

10v | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0,5 | 0,5

11 | 0,3 | 0,7 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0

11v | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0,1 | 0,23 | 0,3 | 0,37

12 | 0,3 | 0,7 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0

12v | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0,3 | 0,7

16, 16v | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0,3 | 0,7

[See definitions in point 1.1] [See definitions in point 1.4]

Vehicle sub-group (sg) | Mission profile (mp)

HPL | HPR | UPL | UPR | SPL | SPR | IPL | IPR | CPL | CPR

31-LF | 0,27 | 0,23 | 0,15 | 0,13 | 0,11 | 0,11 | 0 | 0 | 0 | 0

31-L1 | 0,05 | 0,05 | 0,16 | 0,14 | 0,32 | 0,28 | 0 | 0 | 0 | 0

31-L2 | 0,05 | 0,05 | 0,09 | 0,08 | 0,15 | 0,13 | 0,24 | 0,21 | 0 | 0

31-DD | 0,20 | 0,31 | 0,12 | 0,18 | 0,07 | 0,12 | 0 | 0 | 0 | 0

32-C2 | 0 | 0 | 0 | 0 | 0 | 0 | 0,47 | 0,43 | 0,04 | 0,06

32-C3 | 0 | 0 | 0 | 0 | 0 | 0 | 0,05 | 0,05 | 0,30 | 0,60

32-DD | 0 | 0 | 0 | 0 | 0 | 0 | 0,05 | 0,05 | 0,35 | 0,55

33-LF | 0,27 | 0,23 | 0,15 | 0,13 | 0,11 | 0,11 | 0 | 0 | 0 | 0

33-L1 | 0,05 | 0,05 | 0,16 | 0,14 | 0,32 | 0,28 | 0 | 0 | 0 | 0

33-L2 | 0,05 | 0,05 | 0,09 | 0,08 | 0,15 | 0,13 | 0,24 | 0,21 | 0 | 0

33-DD | 0,20 | 0,31 | 0,12 | 0,18 | 0,07 | 0,12 | 0 | 0 | 0 | 0

34-C2 | 0 | 0 | 0 | 0 | 0 | 0 | 0,47 | 0,43 | 0,04 | 0,06

34-C3 | 0 | 0 | 0 | 0 | 0 | 0 | 0,05 | 0,05 | 0,30 | 0,60

34-DD | 0 | 0 | 0 | 0 | 0 | 0 | 0,05 | 0,05 | 0,35 | 0,55

35-FE | 0,27 | 0,23 | 0,15 | 0,13 | 0,11 | 0,11 | 0 | 0 | 0 | 0

39-FE | 0,27 | 0,23 | 0,15 | 0,13 | 0,11 | 0,11 | 0 | 0 | 0 | 0

[See definitions in point 1.1] [See definitions in point 1.4]

Vehicle sub-group (sg) | Mission profile (mp)

RDL | RDR | LHL | LHR | UDL | UDR | REL, RER, LEL, LER

111, 111V,112, 112V, 113 | 0,27 | 0,63 | 0,03 | 0,07 | 0 | 0 | 0

121, 121V, 122, 122V, 123, 123V, 124, 124V, 125, 126 | 0,03 | 0,07 | 0,27 | 0,63 | 0 | 0 | 0

131, 131v, 132, 132v, 133 | 0,03 | 0,07 | 0,27 | 0,63 | 0 | 0 | 0

421, 421v, 422, 422v, 423 | 0,03 | 0,07 | 0,27 | 0,63 | 0 | 0 | 0

431, 431v, 432, 432v, 433 | 0,03 | 0,07 | 0,27 | 0,63 | 0 | 0 | 0

611, 612 | 0,27 | 0,63 | 0,03 | 0,07 | 0 | 0 | 0

611v, 612v | 0,03 | 0,07 | 0,27 | 0,63 | 0 | 0 | 0

621, 623 | 0,27 | 0,63 | 0,03 | 0,07 | 0 | 0 | 0

621V, 622, 622V, 623V, 624, 624V, 625 | 0,03 | 0,07 | 0,27 | 0,63 | 0 | 0 | 0

631, 631v, 632, 632v, 633 | 0,03 | 0,07 | 0,27 | 0,63 | 0 | 0 | 0

For each manufacturer and each reporting period, the average specific CO2 emissions avgCO2sg of all new heavy-duty vehicles in a vehicle sub-group sg or their primary vehicles, if applicable, shall be calculated as follows:

2.2.1. For heavy-duty vehicles of categories N and O:

(in g/tkm)

2.2.2. For complete or completed vehicles of category M:

(in g/pkm)

2.2.3. For primary vehicles of heavy-duty vehicles of category M:

(in g/pkm)

Where,

∑v

is the sum of all new heavy-duty vehicles of the manufacturer in the vehicle sub-group sg, subject to Article 7b;

CO2v

is the specific CO2 emissions of the new heavy-duty vehicle v determined in accordance with point 2.1;

CO2pv

is the specific CO2 emissions of the primary vehicle of the new heavy-duty vehicle v determined in accordance with point 2.1;

Vsg

is the number of new heavy-duty vehicles of the manufacturer in the vehicle sub-group sg;

Vpvsg

the number of new heavy-duty vehicles in the vehicle sub-group sg, which pursuant to Article 7b shall be accounted for with the CO2 emissions of their primary vehicles in the calculation of the average specific CO2 emissions of point 2.2.3;

PLsg

is the average payload of heavy-duty vehicles in the vehicle sub-group sg as determined in point 2.5;

PNsg

is the average passenger number of vehicles in the vehicle sub-group sg as determined in point 2.5.

For each manufacturer and reporting period from 2019 to 2024, the zero- and low-emission vehicles factor (ZLEV) referred to in Article 5 shall be calculated as follows:

ZLEV = Vall / (Vconv + Vzlev) with a minimum of 0,97

where,

Vall

is the number of new heavy-duty vehicles of the manufacturer in the vehicle sub-groups sg = 4-UD, 4-RD, 4-LH, 5-RD, 5-LH, 9-RD, 9-LH, 10-RD, 10-LH;

Vconv

is the number of new heavy-duty vehicles of the manufacturer in the vehicle sub-groups sg = 4-UD, 4-RD, 4-LH, 5-RD, 5-LH, 9-RD, 9-LH, 10-RD, 10-LH excluding zero- and low-emission heavy-duty vehicles;

Vzlev

is the sum of Vin and Vout,

where,

Vin

is ∑ v (1+ (1 – CO2v/LETsg))

with ∑ v

being the sum of all new zero- and low-emission heavy-duty vehicles in the vehicle sub-groups sg = 4-UD, 4-RD, 4-LH, 5-RD, 5-LH, 9-RD, 9-LH, 10-RD, 10-LH;

CO2v

is the specific CO2 emissions in g/km of a zero- or low-emission heavy-duty vehicle v determined in accordance with point 2.1;

LETsg

is the low-emission threshold of the vehicle sub-group sg to which the heavy-duty vehicle v belongs as defined in point 2.3.4;

Vout

is the total number of zero-emission heavy-duty vehicles of category N, which are not in the vehicle sub-groups referred to by the definition of Vin, and with a maximum of 1,5 % of Vconv.

For each manufacturer and reporting period, the zero- and low-emission vehicles factor (ZLEV) referred to in Article 5 shall be calculated as follows:

ZLEV = 1 - (y - x)

unless this sum is larger than 1 or lower than 0,97 in which case the ZLEV factor shall be set to 1 or 0,97, respectively

Where,

x

is 0,02;

y

is the sum of Vin and Vout, divided by Vtotal, where,

Vin

is the total number of newly registered low- and zero-emission heavy-duty vehicles in the vehicle sub-groups sg = 4-UD, 4-RD, 4-LH, 5-RD, 5-LH, 9-RD, 9-LH, 10-RD, 10-LH, where each of them is counted as ZLEVspecific in accordance with the formula below:

ZLEVspecific = 1 – (CO2v / LETsg)

Where,

CO2v

is the specific CO2 emissions in g/km of a zero- or low-emission heavy-duty vehicle v determined in accordance with point 2.1;

LETsg

is the low-emission threshold of the vehicle sub-group sg to which the heavy-duty vehicle v belongs as defined in point 2.3.4;

Vout

is the total number of newly registered zero-emission heavy-duty vehicles of category N, which are not in the vehicle sub-groups referred to by the definition of Vin , and with a maximum of 0,035 of Vtotal;

Vtotal

is the total number of newly registered heavy-duty vehicles of category N of the manufacturer in that reporting period.

Where Vin/Vtotal is lower than 0,0075, the ZLEV factor shall be set to 1.

ZLEV = 1

The low-emission threshold LET sg of the vehicle sub-group sg is defined as follows:

LETsg = (rCO2sg x PLsg) / 2

Where,

rCO2sg

is the reference CO2 emissions of the vehicle sub-group sg, as determined in point 3;

PLsg

is the average payload of heavy-duty vehicles in the vehicle sub-group sg as determined in point 2.5.

For each manufacturer and each reporting period, the share of new heavy-duty vehicles in a vehicle sub-group sharesg shall be calculated as follows:

For each manufacturer and each reporting period, the share of new zero-emission heavy-duty vehicles in a vehicle sub-group zevsg shall be calculated as follows:

For each manufacturer and each reporting period, the share of new heavy-duty vehicles within the vehicle sub-group sg, which pursuant to Article 7b shall be accounted for with the CO2 emissions of their primary vehicles in the calculation of the average specific CO2 emissions of point 2.2., shall be calculated as follows:

Where,

Vzevsg

is the number of new zero-emission heavy-duty vehicles of the manufacturer in a vehicle sub-group sg;

Vpvsg

the number of new heavy-duty vehicles within the vehicle sub-group sg, which pursuant to Article 7b shall be accounted for with the CO2 emissions of their primary vehicles in the calculation of the average specific CO2 emissions of point 2.2.;

Vsg

is the number of new heavy-duty vehicles of the manufacturer in a vehicle sub-group sg;

V

is the number of new heavy-duty vehicles of the manufacturer.

The average payload value PLsg of a heavy-duty vehicle of category N or O in a vehicle sub-group sg shall be calculated as follows:

The average passenger number PNsg of a heavy-duty vehicle of category M in a vehicle sub-group sg shall be calculated as follows:

Where,

∑mp

is the sum of all mission profiles mp;

Wsg,mp,

is the mission profile weight specified in points 2.1.1 to 2.1.3;

PLsg,mp

is the payload value attributed to the heavy-duty vehicles of categories N and O in the vehicle sub-group sg for the mission profile mp, as specified in points 2.5.1 and 2.5.3;

PNsg,mp

is the passenger number attributed to the heavy-duty vehicles of category M in the vehicle sub-group sg for the mission profile mp, as specified in point 2.5.2.

Payload values PL sg, mp (in tonnes) are determined as follows:

[See definitions in point 1.1] [See definitions in point 1.4]

Vehicle sub-group sg | Mission profile mp

RDL | RDR | LHL | LHR | UDL | UDR | REL | RER | LEL | LER | MUL | MUR | COL | COR

53 | As determined in point 3.1.1 | Not applicable | As determined in point 3.1.1 | Not applicable

53v

54

1s

1sv

1

1v

2 | As determined in point 3.1.1

2v

3 | Not applicable

3v

4-UD | 0,9 | 4,4 | 1,9 | 14 | 0,9 | 4,4 | 3,5 | 17,5 | 3,5 | 26,5 | 0,6 | 3,0 | 0,9 | 4,4

4-RD

4-LH

4v

5-RD | 2,6 | 12,9 | 2,6 | 19,3 | 2,6 | 12,9 | 3,5 | 17,5 | 3,5 | 26,5 | n.a. | n.a. | 2,6 | 12,9

5-LH

5v

9-RD | 1,4 | 7,1 | 2,6 | 19,3 | 1,4 | 7,1 | 3,5 | 17,5 | 3,5 | 26,5 | 1,2 | 6,0 | 1,4 | 7,1

9-LH

9v

10-RD | 2,6 | 12,9 | 2,6 | 19,3 | 2,6 | 12,9 | 3,5 | 17,5 | 3,5 | 26,5 | n.a. | n.a. | 2,6 | 12,9

10-LH

10v

11 | 1,4 | 7,1 | 2,6 | 19,3 | 1,4 | 7,1 | 3,5 | 17,5 | 3,5 | 26,5 | 1,2 | 6,0 | 1,4 | 7,1

11v

12 | 2,6 | 12,9 | 2,6 | 19,3 | 2,6 | 12,9 | 3,5 | 17,5 | 3,5 | 26,5 | n.a. | n.a. | 2,6 | 12,9

12v

16 | Not applicable | 2,6 | 12,9

16v

Technically permissible maximum payload values maxPLsg and cargo volumes CVsg are determined in accordance with point 3.1.1.

Passenger numbers PNsg,mp, passenger masses PMsg,mp and technically permissible maximum passenger numbers maxPNsg for the vehicle sub-group sg and mission profile mp are determined in accordance with point 3.1.1.

Payload values PLsg, mp (in tonnes) are determined as follows:

[See definitions in point 1.1] [See definitions in point 1.4]

Vehicle sub-group

(sg)

Mission profile (mp)

RDL | RDR | LHL | LHR | UDL | UDR | REL, RER, LEL, LER

111, 111V,112, 112V, 113 | 1,5 | 7,5 | 1,5 | 11,2 | n.a. | n.a. | n.a.

121, 121V, 123, 123V, 125 | 2,2 | 11,2 | 2,2 | 16,8 | n.a. | n.a. | n.a.

122, 122V, 124, 124V, 126 | 2,4 | 12,2 | 2,4 | 18,3 | n.a. | n.a. | n.a.

131, 131v, 132, 132v, 133 | 2,6 | 12,9 | 2,6 | 19,3 | n.a. | n.a. | n.a.

421, 421v, 422, 422v, 423 | 2,6 | 12,9 | 2,6 | 19,3 | n.a. | n.a. | n.a.

431, 431v, 432, 432v, 433 | 2,6 | 12,9 | 2,6 | 19,3 | n.a. | n.a. | n.a.

611, 612 | 1,2 | 6,1 | 1,2 | 9,2 | n.a. | n.a. | n.a.

611v, 612v | 1,2 | 6,1 | 1,2 | 9,2 | n.a. | n.a. | n.a.

621, 621v, 623, 623v | 1,3 | 6,3 | 1,3 | 9,5 | n.a. | n.a. | n.a.

622, 622V, 624, 624V, 625 | 2,6 | 12,9 | 2,6 | 19,3 | n.a. | n.a. | n.a.

631, 631v, 632, 632v, 633 | 2,6 | 12,9 | 2,6 | 19,3 | n.a. | n.a. | n.a.

Technically permissible maximum payload values maxPLsg and cargo volumes CVsg are determined in accordance with point 3.1.1.

The mileage and payload (passenger) weighting factor (MPWsg) of a vehicle sub-group sg is defined as the product of the annual mileage specified in point 2.6.1 and the payload and passenger-number values for the vehicle sub-group specified in points 2.5.1, 2.5.2 and 2.5.3 for vehicle categories N, M and O, respectively, normalised to the respective value for vehicle sub-group 5-LH, and shall be calculated as follows:

(for heavy-duty vehicles of categories N and O)

(for heavy-duty vehicles of category M)

Where,

AMsg

is the annual mileage specified in point 2.6.1, 2.6.2 and 2.6.3 for the heavy-duty vehicles in the respective vehicle sub-group;

AM5-LH

is the annual mileage specified for vehicle sub-group 5-LH in 2.6.1;

PLsg

is as determined in points 2.5.1 and 2.5.3;

PNsg

is as determined in point 2.5.2;

PL5-LH

is the average payload value for vehicle sub-group 5-LH as determined in point 2.5.1.

[See definitions in point 1.1]

Vehicle sub-group

(sg)

Annual mileage AMsg (in km)

53, 53v | 58000

54 | 58000

1s, 1sv | 58000

1, 1v | 58000

2, 2v | 60000

3, 3v | 60000

4-UD | 60000

4-RD | 78000

4-LH | 98000

4v | 60000

5-RD | 78000

5-LH | 116000

5v | 60000

9-RD | 73000

9-LH | 108000

9v | 60000

10-RD | 68000

10-LH | 107000

10v | 60000

11 | 65000

11v | 60000

12 | 67000

12v | 60000

16, 16v | 60000

[See definitions in point 1.1]

Vehicle sub-group

(sg)

Annual mileage AMsg (in km)

31-LF | 60000

31-L1 | 60000

31-L2 | 60000

31-DD | 60000

32-C2 | 96000

32-C3 | 96000

32-DD | 96000

33-LF | 60000

33-L1 | 60000

33-L2 | 60000

33-DD | 60000

34-C2 | 96000

34-C3 | 96000

34-DD | 96000

35-FE | 60000

39-FE | 60000

[See definitions in point 1.1]

Vehicle sub-group

(sg)

Annual mileage AMsg (in km)

111, 111V,112, 112V, 113 | 52000

121, 121V, 122, 122V, 123, 123V, 124, 124V, 125, 126, 131, 131v, 132, 132v, 133 | 77000

421, 421v, 422, 422v, 423, 431, 431v, 432, 432v, 433 | 68000

611, 612, 611v, 612v, 621, 623, 621v, 623v | 40000

622, 622V, 624, 624V, 625, 631, 631v, 632, 632v, 633 | 68000

For each manufacturer, the following average specific CO2 emissions shall be calculated:

CO2(2025) = ZLEV × ∑ sg sharesg × MPWsg × avgCO2sg

CO2(NO) = ∑sg sharesg × MPWsg × avgCO2sg

CO2(MCO2) = ∑sg sharesg × MPWsg × [avgCO2sg × (1 – pvsg) + avgCO2psg × pvsg]

CO2(MZE) = ∑sg sharesg × MPWsg × (1 – zevsg) × rCO2sg

CO2(M) = CO2(MCO2) + CO2(MZE)

Where,

∑sg

is the sum of those vehicle sub-groups that are included in the calculation of the particular average specific CO2 emissions in accordance with point 4.2;

ZLEV

is as determined in point 2.3;

sharesg

is as determined in point 2.4;

zevsg

is as determined in point 2.4;

pvsg

is as determined in point 2.4;

MPWsg

is as determined in point 2.6;

avgCO2sg

is as determined in point 2.2;

avgCO2psg

is as determined in point 2.2;

rCO2sg

is as determined in point 3.1.2.

The following reference values shall be calculated on the basis of all new heavy-duty vehicles of all manufacturers for the reference period applicable to the vehicle sub-group sg according to point 3.2.

3.1.1. For each vehicle, the vehicle sub-group sg, payload PLsg,mp, passenger number PNsg,mp, passenger mass PMsg,mp, technically permissible maximum payload maxPLsg, technically permissible maximum passenger number maxPNsg and cargo volume CVsg values shall be calculated as follows:

(for heavy-duty vehicles of category N)*

(for heavy-duty vehicles of category M)*

(for heavy-duty vehicles of category M)*

(for heavy-duty vehicles of category N)

(for heavy-duty vehicles of category M)

(for heavy-duty vehicles of category O)

(* only for vehicle sub-groups, for which no explicit values for PLsg,mp or PNsg,mp are provided in point 2.5)

3.1.2. Reference CO2 emissions rCO2sg referred to in Article 3 shall be calculated as follows:

(for heavy-duty vehicles of categories N and O)

(for heavy-duty vehicles of category M)

(for heavy-duty vehicles of category M)

Where,

∑v

is the sum of all new heavy-duty vehicles in the vehicle sub-group sg registered in the reference period applicable to sg according to point 3.2;

CO2v

are the specific CO2 emissions of the new heavy-duty vehicle v as determined in accordance with point 2.1, if applicable adjusted pursuant to Annex II;

CO2pv

This article is long: the rest is at the official publication.